Question about Samsung Phones

1 Answer

I have just changed the housing on an E370 but now, when the slider is closed is won't lock. How does it know that it is closed? Is there any physical part or electrical contact that does this? Thanks for your help - my daughter isn't too pleased with me at the moment!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It turns out that there is a very small magnet on one edge of the housing that I had missed and didn't move over to the new housing. I would imagine that this trips a relay when the slider is closed and put the phone into 'lock' mode.

Posted on Jul 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phone ring tone in house cannot hear it do not know house to fix as instructions are in greek


must be sure handset ringer volume is NOT set TO off
2) THE Telephone line cord and power adapter are plugged in properly.
3)the handset may be too far from the telephone base. Move it close to the telephone base.
4) many extension phone on the telephone line to allow all of them to ring simultaneously.
5) if other telephones in your home are having the same problem , the problem will e in service provider
6) other electronic products such as HAM radio detect the phones cause interferences.
7)test a working phone at the wall jack.
8)remove and install the battery again and place the handset in the telephone base
9) wait for the handset to synchronize.
God bless you

Sep 27, 2012 | Phones

1 Answer

NEC DT700 phone lock


just lift the handset and put password. 0000 is default password.

Aug 14, 2012 | NEC DT330 - - Phone

1 Answer

How to lock my pictures


Once you have jailbroken your iPhone. You'll got a Cydia icon on your SpringBoard.
  1. Launch the Cydia.
  2. Go to Search Tab and search for Lock Down and tap it.
  3. Tap Install button at Top-Right and then Confirm button at Top-Right to begin installation.
  4. After completion, go back to Springboard where you'll find a brand new icon i.e. LockDown.
lock-iphone-applications-lockdown-01-165x240.jpglock-iphone-applications-lockdown-02-165x240.jpglock-iphone-applications-lockdown-03-165x240.jpg
lock-iphone-applications-lockdown-04-165x240.jpglock-iphone-applications-lockdown-05-165x240.jpg
How to use LockDown
  • When you will run the Lockdown application for the first time, you will be asked to setup a Safety Code and a Password. This password will be used to unlock any locked application and to open Lockdown itself. Safety code is useful in case you forget your LockDown password.
  • Once you have setup the Password and safety code, you will see all your iPhone applications listed on next screen.
  • Select any application you want to lock, a Lock button will appear. By tapping that button your selected application will be locked and a little lock icon will appear next to that locked application.
  • Now if you close LockDown App and try to open you locked application (Mail app in this example), you will be prompted to enter the password to open it. Use your Lockdown password to open that App.
(Once you open the app, use it and when you close the app it will be automatically locked again. So no need to re-lock it in LockDown.)
lock-iphone-applications-lockdown-1-165x240.jpglock-iphone-applications-lockdown-15-165x240.jpglock-iphone-applications-lockdown-06-165x240.jpg
lock-iphone-applications-lockdown-07-165x240.jpglock-iphone-applications-lockdown-08-165x240.jpglock-iphone-applications-lockdown-09-165x240.jpg
Lets check other options in Lock Down.
  • Tap LockDown to launch it. This time you'll be asked to input the password to open LockDown. Do it.
  • Tapping any locked application in LockDown will prompt you if you want to Unlock it. Pressing the Unlock button will perform the unlock that App.
  • Locked Applications button at the top right quickly shows all the locked application only rather scrolling through all applications to locate locked ones.
  • Under Settings tab at Bottom, following options are available:Locking Options
    • Lock All Applications
    • Unlock All Applications
    • Lock This Application (ON/OFF)
    Password Management
    • Change Saftey Word
    • Change Password
    • Forgot Password
    Other Settings
    • Lockdown Dylib (If you turn it OFF, even if you open a locked application it will not prompt for password. So, it's helpful when you are using your iPhone by yourself. See the details in screenshot. )
    • Lock Icon Moving (When turned ON it do NOT let anyone to move any icon to preserve your arrangement of icons.)
    • Lock App Deletion (When turned ON it do NOT let anyone to delete any application without your permission.)
    • Enable Launch Button (When turned ON, Lockdown will show a launch button when you open a locked application and input password.)
lock-iphone-applications-lockdown-10-165x240.jpglock-iphone-applications-lockdown-11-165x240.jpglock-iphone-applications-lockdown-12-165x240.jpg
lock-iphone-applications-lockdown-13-165x240.jpglock-iphone-applications-lockdown-14-165x240.jpglock-iphone-applications-lockdown-16-165x240.jpg
I am using this great application since the day it's supported with iPhone OS 3.0. It's working like a charm and will keep it installed because of its usefulness and surely recommend it.

May 13, 2011 | AT&T Phones

1 Answer

Nktel A600 slider china mobile use which of the OS ?? Is it Symbian OS or Windows mobile 6.0 ??


dear sir i bye a nktel mobile model A600 in bangladesh ,now i want to change the main manu style can you tell me how can i change it.

Jun 24, 2009 | Phones

1 Answer

Password


i have same phone same problem please hlep me

May 13, 2009 | Samsung SGH-R225m Phone

1 Answer

I want to change my flex cable on my samsung e250


it is very easy
1st you can get one cheap from eBay
a screw driver 0# and a id card or visa card
2nd unscrew the appeared screw from the back and be aware of the screws under the covers
3rd carfuly remove the cover and the mb and remove the connector of the fpc
4th unscrew the 4 screws from the slider 2 of them under covers and with the card try to unlock the slider from the sub by the sides of it
now its very clear to open the locker and install the new one and the undo all the steps

May 06, 2009 | Phones

1 Answer

Samsung e370. not receiving incoming messages, contactd network they said nothing wrong there. is sending messages


maybe your phone lost some settings. usually phone companies have on there site an automated setting sender(I don't know the proper name for it), usually it's located at customer support, where you chose let's say MMS service and you punch in your phone# and sends the settings to your phone, which you have to save it in to your phone. then it should work.
It would help if you would mention the country and company.

Aug 31, 2008 | Phones

1 Answer

Black spot on the LCD screen on the SGH-e370 Samsung phone


probably an abused screen...gonna have to replace the phone .....

Jun 01, 2008 | Samsung Phones

1 Answer

Phone freeze


TAKE IT TO THE PHONE SHOP THEY WILL SEND IT OFF AND UNLOCK IT

Mar 19, 2007 | Samsung SGH-R225m Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Phones Experts

Yoav Shilon
Yoav Shilon

Level 2 Expert

101 Answers

Dakshinamurthy...

Level 1 Expert

23 Answers

Lawrence Oravetz

Level 3 Expert

7580 Answers

Are you a Samsung Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...