Question about Veo Advanced Connect Webcam

1 Answer

My camera does not show my pictres in focus. I have a Veoadvanced connect

My web cam pictures are not in focus. I do get the pictures . I tried reenstalling it and the repair feature but the outcoe is still the same. Can you help me?

Posted by on

  • mar55 Jul 14, 2008

    can not get a clear picture

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Did you install the software with the camera connected to the computer? Disconnect the camera from the USB port and reinstall the software. When the program asks you to connect the camera, do so, and it should work. Hope this is of some help. Bud

Below is info for setting up Audio & Video to chat on line after you install , either Skype or a messenger program.


Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video shoud work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have my web cam all set up and the camera flashes for a short time and then goes off. It shows my picture for a short time and then goes off can you help please


Usually the computer has recognised the connection of an external device. A camera software on the computer should allow to capture store and edit photos or videos. Depending on the type of camera, like with digital cameras, only still images are acquirabel and not videos or motion pictures. Refer to the capabilities of the type of camera either as web cam, digital still camera, or simply incapable of motion picture features.

Jan 22, 2011 | Microsoft LifeCam VX-1000 Webcam

1 Answer

Frontech e-cam (diamond)web cam is showing blue shabby picture.. colourless help me plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz


1) Reset connection or try a different USB port. - If it runs directly from VGA connection, reset VGA card.
2) Update drivers VGA drivers (Either motherboard or PCI manufacturers web site)
3) Update camera drivers (Frontech website follow links for support and downloads)
Un-install and re-install the driver software

Nov 25, 2010 | Radio Shack VGA PC Camera Webcam

1 Answer

My veb cam not show clear picture so what can i do for that


try turning the dial on the front of the cam...right where the lense is. I have one and sometimes its difficult to keep them in focus...hope this helps

Aug 03, 2010 | Microsoft LifeCam VX-3000 Web Camera

2 Answers

My web cam is very blair(image is not clear)


just adjust the focus . rotate the camera focus.

Dec 31, 2009 | Logitech Quickcam Chat Webcam

1 Answer

It does not shows clear picture


turn the black ring that is around the len's while your cam is on and you can see a picture. ...the black ring will focus your lens. turn till you get a clear picture...turn either one way or the other till picture clears up

Aug 30, 2009 | HP USB Web Camera

1 Answer

My dnex web cam wont clear up what can I do to


Check the cleanliness of the lens first. If it looks reasonable, then try turning the small outer circle around the lens to focus the camera.

If that doesn't work, then the lens may have become loose from the focus function, it'll either need re-attaching somehow or maybe even complete replacement.

Jul 07, 2009 | Dynex DX-WC100 Webcam

1 Answer

I have a web cam but its showing blurry


Please change the focus of the webcam, (if not available in webcam, you can control from the webcam software--- check the focus utilities)

Jun 27, 2009 | QPS QSIPBL2 Network Camera

1 Answer

Webcam blurred


Very often this is a problem with the focus. Check if the webcam has a focus ring in front of it and if so, try turning it to sharpen the image.

Jun 08, 2009 | QPS QSIPBL2 Network Camera

2 Answers

Blurry picture


There is a focus ring around the lens of the WEB cam turn this ring until your image becomes clear, just like a camera focus knob.
Click on the WEB cam software, you will be able to go into an options or configuration, click on video setting, you should see an image of yourself, adjust the focus until the image is clear.

Jan 01, 2009 | Radio Shack VGA PC Camera Webcam

1 Answer

Web cam


I suggest that you focus the lens.
On your web cam,where the lens is, can you move/turn a little wheel?
This is the focus wheel.

Or you could try in the webcams settings.

Hope Ive Helped.

Regards,
Sophie x

Feb 14, 2008 | Logitech Webcam

Not finding what you are looking for?
Veo Advanced Connect Webcam Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Veo Webcams Experts

micky dee

Level 3 Expert

2624 Answers

Waheed Hudewale

Level 2 Expert

209 Answers

Florin

Level 3 Expert

733 Answers

Are you a Veo Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...