Question about Intel Motherboard

1 Answer

Barebones not working

My system does not work. Do you have any answers?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Intel Master
  • 13,433 Answers

A small pc right? not a printer?

Just makeing sure.

tell me does it turn on? do you get image? any beeps?

I would use a card like this to find out the problem

But, since you most likely don't have one, start with unplugging all the devices from the motherboard that aren't a must for a start up.

This includes
dvd/cd drives
Hard drive
extra cards attached to the motherboard.

So leave only the basics connected.

powersupply - motherboard - cpu - memory - video.

Thats enought to get picture out from the computer.
If you still don't get anything and don't hear any beeps
remove all your memory and try starting again, you should hear beeps now.

Il continue this solution ones you have tryed that.

Posted on Jul 05, 2008

  • Ekse Jul 05, 2008

    By the way is the system under warranty? If your pc is under warranty get it replaced / repaired.


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Bought 2 Jetway barebones system from newegg... they both have the JNC98-525E-LF motherboard... one works perfectly... the other resets regularly every 10 seconds... tried different RAM, no HDD etc......

Swapping power supplies is always a good test. If you can't switch the supplies between the systems, then you'll need to swap the motherboards as you said. From your description, it does sound like one of them is flaky. But since the thing's under warranty, why not just send it back and save the effort? You'll wind up doing that anyway.

Jun 25, 2011 | Jetway JNC98-525E-LF Intel Atom D525...

1 Answer

I have 4 usb poorts on my barebone. two of them

If these are case front/top or other panel ports, verify that the ports are connected correctly.

if ports are configured correctly, remove all usb drivers via device manager. then reinstall them. if the problem still occurs you either have corrupt usb drivers (probably not since 2 ports work) or the USB ports were damaged in installation or because of usage.

sometimes the ports will not clear their settings, try the object you are plugging into the 2 non-workign ones to another port hen try something you never plugged into the 2 non-working. if you still get an error, its a driver or damage issues

Feb 11, 2010 | ASUS P1-P5945G Motherboard

1 Answer

I bought a Dell barebones system. When it boots up it asks you to choose a configuration and it gives you 5 choices. 1. AMT_DASH_VPPRO 2. N/A 3. MANAGEABILITY ENGINE(ME) DISABLED 4. AMT_DASH: NO_TLS (NOT...

Actually - most dells even barebones come with some type of warranty - I don't believe that this information should be showing at all. - Should be booting up to the Operating System you ordered it with. I would instruct you to either call Dell Support right away and see what their first line of Tech Support says. 1-800-873-1420.
A/V Media Guy

Nov 22, 2009 | Computers & Internet

1 Answer

Chip up grade options!

is a socket 754 motherboard. It will support AMD Athlon processors up to Athlon64 3400+. It is a bit long in the tooth by today's standards, and only uses DDR memory, not DDR2. You may get more of a bang for your buck by buying a "barebones" system, which can consist of a motherboard with processor and memory, depending on how much you want in the barebones package.

Typically you use the case, power supply you already have with the new motherboard and processor and ram (memory).

At any rate, if you only want to upgrade your processor, keep in mind that your board only supports up to the Athlon64 3400+. It will support up to DDR 400 ram. You would probably benefit more by buying 2 sticks of 400 DDR ram at 2 gigs each, if you don't have much ram now. If your processor is close to the 3400+, then another processor in that board isn't going to change things much.

Good luck, and write back if you'd like more help.


Socket754 Supports AMD Athlon64 upto 3400+;

Nov 02, 2009 | Computers & Internet

1 Answer

Purchasaed barebone system from Tiger Direct with

You can goto:

And select your motherboard and you will be able to download anything you need for this particular motherboard. Anything that was on the DVD will be available here to download.

Jul 19, 2009 | ASUS M3N78 PRO Motherboard

1 Answer

Asrock P4V8+ freezes after ram checking

Try going into the BIOS and selecting safe or minimal settings/options save and reboot. If this works go back to BIOS and make changes one at a time until it may not work again, then you will know which option is causing the system hang ups. My guess is also your motherboard is SATA 1 capable (1.5
gbs) not SATA 2, in which you could purchase a separate controlller card for your HDD. Good luck.

Jul 02, 2009 | Intel D865GBF Motherboard

1 Answer

One beep, system powers up, then shuts down

is well known that elitegroup motherboard have this problem, try it to dissasemble another time yor matherboard, let it out of case reasemble pieces out of case switch on and look if the system is stabile or not, if it is, prior to put *********** board to the case put under the mainboard aplastic film then mount in the case, this must solving your problem, if even out of case the system is reseting disconect any devices and let ontly floppy drive on it with ram and processor too , download from internet newer version of your bios and make it a new flash from floppy drive, this mut resolve your problem definitely to you. in any case dont forgt to put plastic film under mainboard(withaout scotching them or sometthing like this) and mount it in his place.

Apr 05, 2009 | EliteGroup P6STP-FL Motherboard

1 Answer

Unable to restart..

Give me the full model and manufacturer information on your computer. Is it made by one of the major brands, i.e. HP, Dell, etc or is it a barebones system? If barebones then I will need motherboard model # to go with the manufacturer information that you have given already. ECS is infamous for issues.

Feb 21, 2008 | ASUS P5PE-VM Motherboard

1 Answer

Biostar motherboard

I am not certain how "old" these systems are but it sounds like upgrading is not necessarily going to be smooth. has a barebones system you can install your hard drive in and be up and running. Here's the link:

Jan 03, 2008 | Biostar M7NCD ULTRA Motherboard

Not finding what you are looking for?
Intel Motherboard Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

2598 Answers


Level 3 Expert

763 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides