Question about NEC Projection Televisions

2 Answers

I have a NEC PlasmaSync 42MP02. When I turn it on, there's a click the standby LED changes from red to green, but then goes back to red again. Nothing appears on the screen, it remains dark.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 726 Answers

There is no signal check the video connection cable

Posted on Jul 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • NEC Master
  • 19,396 Answers

Monitor is not receiving the video signal. Check the video connection cable at the back, also test the monitor on a different computer.

Posted on Jul 05, 2008

  • Ginko
    Ginko Jul 05, 2008

    If your Nec is not connected to a computer this can be normal. If you want to use the monitor as standalone tv you must activate the tv function using the remote.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No pic or sound. the stand by light blinks green then the lamp light blinks red untill it turns off all toghther. the lamp is broken i just want to know if that is the only problem or if the driver may...


Hi,

Flashing green standby led light at the front panel is an indication that the unit waiting for the lamp to turn on. Since the lamp led light flashes, the unit sensed it already burned out.
Faulty lamp driver has a different error code which is "flashing of the standby light 5 times".
Your unit will back to normal operation again after the lamp replacement.

Hope I helped you.
Have a nice day!
Thanks for using Fixya.

Jul 22, 2011 | Sony KDS-R60XBR1 60" Projection HDTV

1 Answer

Hi. I have a problem with my 42 inch plasma tv,when tv is turned on green L.E.D appears on bottom right and tv works as normal.After 40 minutes to an hour tv makes click sound and screen goes blank the...


Hello, A common problem for these is bad capacitors in the power supply, Remove the back from your Tv and look at the power supply on the left hand side.
You will see roughly around 9 x capacitors that are bulged / domed shaped on top usually these are valued at 3300uf 10V any that have bulged or leaked a brown like substance should be changed. This will cure the problem as they overheat being sat next to a heatsink that gets very hot! Try and change them for the same 3300uf but a higher voltage.
I hope that this help to rectify the fault of the projection TV....

May 12, 2011 | Projection Televisions

1 Answer

I have a Sony KDS-R50XBR1 that has no picture. When I turn on the TV, the green Power/Standby LED light blinks for about 30 seconds, then turns red and blinks five times. The Power/Standby LED repeats...


  • Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen A2 slightly.

Jan 19, 2011 | Sony KDSR50XBR1 50" Projection HDTV

2 Answers

I have a 56' that wont show picture


Power board is bad.. I had the same issue.

Apr 13, 2010 | Samsung HL-S5679W 56" HDTV

1 Answer

Power/standby led beeps red light 6 times


crazyford359
Your Thermal fuse is out. I just replaced mine, the part is only $4.85 on Sonyparts.com. Ordered (2)

Feb 16, 2010 | Sony Grand WEGA KDF-55WF655 36" Rear...

1 Answer

I have a 56" samsung rear projection tv that won't turn on. the red standby light is lit and when i push the power i hear two clicks and the green timer light flashes quickly then the green led stays lit...


I suspect you probably have a bad LED assembly. It could be either the red, green or blue that is bad and give you the same symptom. The problem is locating parts for it as it looks like the light engine is no longer available. I would have a technician look at the TV to verify this and what parts are needed for repair.

Nov 03, 2009 | Samsung HL-S5679W 56" HDTV

1 Answer

Samsung HLP4674W - changed bulb - still no picture - lights flash


If the lamp has been replaced I would think the Lamp ballast would be most likliest followed by the color wheel and then the Digital board. You can get any part needed for your model at www.tvrepairworld.com just leave them a email they respond quickly.

Aug 28, 2009 | Samsung HLP4674W 46" Rear Projection HDTV

1 Answer

Thompson 52jw643 is stuck in standby, when switch on red led appears, changes to yellow for approx 1-2 sec, sounds like trying to start and reverts to red. sometimes flashes red once. any help greatfully...


I have a similar problem with Thomson 52JW643 S in that it takes at least 12 to 16 attempts before it eventually turns on very very annoying !!!!!!! turns from red to yellow to green then back to red and then same again until she feels like switching on then perfect picture sound and quality ??????? can any one advise please

Jun 27, 2009 | Thomson Projection Televisions

1 Answer

Sony green power/standby led blinks picture goes out


I had this same problem and after doing some research, I removed the lamp, cleaned it and plugged it back in. It fixed my problem completely.

Mar 22, 2008 | Sony Grand WEGA KDF-60WF655 60" Rear...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61292 Answers

Are you a NEC Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...