Question about Breadman TR900S Bread Maker

1 Answer

Breadman Pro TR900S does not begin kneading AT ALL!

I have a Breadman Pro TR900S. I have only made bread in it a few times, but now it will not do a thing. I have it plugged in, and the screen allows me to put in my settings, but as soon as I push start nothing happens. The timer does not start to count down and the machine does not knead. I have taken out the pan and made sure that it was in correctly and it was. The blade is also in place. Could this be the motor in it?

Posted by on

  • 2 more comments 
  • sharonjimerb Jul 26, 2008

    I just bought my breadman Pro and have followed all the directions. Is the machine suppose to start mixing right away? I have put in all the information and pressed Start, and the timer says 3:43, the little ":" is flashing and there is an errow next to "preheat". Am I suppose to wait for something? I checked the intructions again and nothing was said about having to wait for the mixing to start.

  • Anonymous Oct 27, 2008

    This sucks! Any clue how to fix it?

  • Anonymous Dec 30, 2008

    I just purchased the breadman. Turned it on yesterday to burn off oils, etc. Today I want to make some bread and it will not start. I pushed the start hard, but nothing.

  • No Dough Jan 13, 2009

    We bought ours a little over a year ago @ Target - only used it maybe 4-5 times and now it won't do anything. Timer just sits there and it never kicks off... too bad, because we really liked it before this happened.

    The Tech hotline says they don't stock replacement parts so even if they find out what's wrong with it, no one can fix it. "You'll need to replace the machine with the current model"... Niiiiiice.



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I can't promise you that this is the solution, but some of the cycles have a relatively long preheat cycle where the bread machine just sits there. Make sure that you are on cycle #1 and it should start kneeding right away.

Posted on Nov 26, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Breadman pro

contact manufacturer.

Aug 24, 2014 | Breadman TR900S Bread Maker

1 Answer

Breadman pro

If you know the model number of your Breaman Bread Maker you may be able to order a replacement kneading blade online from the following site:

Click on your model to open a list of available replacement parts.A kneading blade will be about $6.49 plus shipping.

Trust this is helpful. Thank you for using FixYa!

May 17, 2012 | Oster 5838 ExpressBake Bread Maker

1 Answer

Zojirushi home bakery model BBCQ-S15 kneading blade needed

Hi Jean, I hope I can help you find your paddle. Did you lose your paddle or did you buy a machine without one. Or perhaps yours broke?

Oct 18, 2011 | Breadman TR900S Bread Maker

1 Answer

I need a replacement bread pan and kneading paddle for a breadman Pro tr-777spr. Anyone out there know where I can get one?

My bread pan is not too bad, but my kneading paddle is rather beat up, so I kept searching online and finally found a site that had the kneading paddles so I ordered two. Hopefully that will take care of my problem. It helped that I found out accidentally that the same paddle (part # 20274) fits three other Breadman machines (TR2200, TR220-C, & TR2200--97) so I just kept searching and about 2 a.m. I found this site. I hope this will help others looking for paddles.

Jul 30, 2009 | Breadman Kitchen Appliances - Others

1 Answer

Kneading paddle having problem kneading

Sounds like you might need a new belt. If it works ok with nothing in it but wont when the dough is in there

Feb 13, 2009 | Breadman TR875 Bread Maker

1 Answer

TR900S Bread Pan Worn Out They have manuals and parts for most breadmakers at very reasonable prices.

Nov 26, 2008 | Breadman TR900S Bread Maker

1 Answer

Breadman pro TR900S

I had great success in finding what I wanted for my breadmaker at They have manuals and parts for most breadmakers at very reasonable prices.

Oct 29, 2008 | Breadman Pro Dual Bread Maker

1 Answer

Bread Machine not kneading
This site has bands/belts for breadmakers. I am buying my new paddle for the tr900s breadman pro from there. Perhaps your belt is broken? I personally have never replaced one, but it should not be too hard. Make sure you unplug the breadmaker before opening it up at all.

Try running the breadmaker with no pan in it and see if the paddle shaft turns at all during the cycle. Also, the paddle will not turn at all in the first 30 minutes of certain cycles, like the whole wheat. This is stated on the time chart of the instruction manual for this model.

Hope this helps!

Apr 18, 2008 | Kitchen Appliances - Others

Not finding what you are looking for?
Breadman TR900S Bread Maker Logo

Related Topics:

527 people viewed this question

Ask a Question

Usually answered in minutes!

Top Breadman Kitchen Appliances - Others Experts

Dave Kristol

Level 1 Expert

2 Answers

Irene Tulloch

Level 2 Expert

472 Answers


Level 3 Expert

102366 Answers

Are you a Breadman Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides