Question about HP LaserJet 3055 All-In-One Printer
We have three HP LaserJet 3055 all in one printer which we thought as good all in one printer. However, recently one of system failed to accept Network Printing and when I have checked I found that the Manual IP address given to the printer lost. The printer control panel shows IP address as 000.000.000.000
I tried several time to set the IP address 192.168.1.11 and even printer menu shows "setting saved" but within next minute if I check the IP, it shows the same 000.000.000.000 IP address.
(Menu > Network Configuration > TCP/IP > IP = 192.168.1.11 > Yes > Settings Saved)
The Report for Network Configuration shows Following two important symptoms:
A) Status = Initializing
B) IP address = Configuring
Show to HP engineer, they told that main board is required to be replaced and the cost they told was almost 40% of the new HP 3055.
Now the same problem observed with the second HP 3055 and again same symptoms. It does not save IP address even the control panel confirms "Settings Saved"
Any idea, is it related to any firm ware problem or actually a printer's main board problem ?
Thanks in advance.
The same problem repeated with
I can solved this problem please give me one chance
Posted on Jul 24, 2008
HP LaserJet 3055 All-in-One Printer ip configured problem
Posted on Oct 04, 2008
We found that disabling PoE on the switch port(we have Cisco 3750 switches) solved the problem.
Posted on Oct 06, 2008
Try doing a cold reset first, then check that DHCP is manual not Auto. then try to input IP address again. If the Network card is seperate then you may only have to replace the Nic
Posted on Jul 16, 2008
Try flashing the firmware: one of the fixes is this - (Improved IP address management of DHCP to Manual changes). See link below.
Gerben People tend to evaluate events in light of their paradigm rather than evaluate their paradigm in light of events.
Posted on Oct 07, 2008
Switch off the printer and press * & enter key together &switch on wait till you see " permanent storage int"
then release button your printer comes back to original defaults
then re-configure printer as you require
Posted on Jun 01, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 11, 2012 | HP LaserJet 3055 All-In-One Printer
Jan 20, 2011 | HP LaserJet 3055 All-In-One Printer
Nov 10, 2010 | HP LaserJet 3055 All-In-One Printer
Jul 15, 2009 | HP LaserJet 3055 All-In-One Printer
Sep 27, 2008 | HP Officejet Pro L7780 All-In-One InkJet...
Jul 16, 2008 | HP LaserJet 3055 All-In-One Printer
Mar 03, 2008 | HP LaserJet 3055 All-In-One Printer
Feb 11, 2008 | HP LaserJet 3055 All-In-One Printer
Oct 03, 2016 | HP LaserJet 3055 All-In-One Printer
1,973 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: