Question about Motorola Cell Phones

1 Answer

Phone charges up, but the background light stays on. None of the buttons work besides the red one. Can receive calls, however cannot make calls or view texts. Motorola BZ60 was not dropped in water. It was left in the sun sitting on a metal surface for several hours.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 983 Answers

There is some problem in the firmware so give the restore factory settings(reset) ..
all your firmware problems will be solved ....
this firmware problem may be due to some reasons like removal of the battery when the phone is turned on or due to the sudden turn off the mobile when the battery charge was low or may be due to some virus attack or due to the over heating in the sun..etc ..
so by giving the restore factory settings it will get fixed ....

any doubts you can reply me
i am always here to assist you
thank you
bye
rate my solution

Posted on Jul 05, 2008

  • Dileep Keshavanarayana
    Dileep Keshavanarayana Jul 05, 2008

    if the same problem persists then in the light settings just turn off & turn on the background light ...



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi,Just purchased 2 antec gain Bluetooth receivers type bxr 100. Operating instructions are not included. Maybe it's just me, but i'm not succeeding in getting them to work. No lights at all when they


Make sure that the unit is fully charged by a micro USB the light on it will be red until it's fully charged put phone in search mode and press the center button until the light flashes red and blue after the phone finds it you should have an option to auto pair when it's not in use it will turn off when paired and working pressing either track button will start the music player then just play with the buttons and see what it does you can stop anything from the phone controls

Mar 18, 2014 | Antec BXR-100 Gry Audio...

1 Answer

Bluetooth wont charge or power on. when charging the red light comes on. once disconnected from charger it wont come on


Indicator Lights:
1.Headset Status Headset Indicator Light
2.Powering on Steady blue, then intermittent flashes
(changes to standby mode)
3.Powering off Red appears and goes off
4.Standby Blue intermittent flashes
5.Charging battery Red solid light. Light indicator turns off when
battery is fully charged and headset is off.
6.Low battery Triple red flashes
7.Pairing mode Blue/red alternating flashes
8.Missed call Purple flashes. Press the call control button
to cancel flashing light.
9.Incoming call Triple blue flashes when ringing.
Power on and off:
1.Turn on the headset Press and hold the call control button until the
indicator glows blue. You will hear ascending
tones.
2.Turn off the headset Press and hold the call control button until the
indicator glows red. You will hear descending
tones. When power is off, indicator stays off.
If none of this is helpful then it may be that your battery is dead, if that is the case then you will need to replace the whole headset. The battery's are not replaceable.

Good luck from Headsets Direct!

Sep 21, 2011 | Plantronics Explorer 220 Bluetooth Headset...

1 Answer

Hi i have a 8220 and red light is blinking on charging. I have checked very possible thing even the charger but cant get around pls help! thanks


Hi,
Please don't worry this is caused because of various reasons.The lights explains what could be the problem

Orange and Yellow lights mean no defects in the mobile.Orange is phone battery is very low.Yellow is for boot up..

Red light means-You have power management problem.
You have to understand why it is being caused..

1)Due to dead battery.The phone will charge but you phone battery will not get charged it acts like it is getting charged.Behind the scene it cant store the charge.
2)Due to charger is not working properly no charge in the battery.

So you have replace this accordingly..

Please try this some time phone booting may be stopped,
This is not a solution when the battery is dead or fully down....

Sometimes The boot cycle of the phone is stopped.You have to start it.Remove the battery and place it again and press the red 'end' button continuously until the red light flashing stays on.Press green button' call' button and hold the red button...Now press these two buttons alternatively until you see hour glass symbol.Now when you see hour glass wait and see the phone booting....


Please do rate the solution if the issue is resolved or post a comment for further assistance.


thank you for using fixya have a nice day:-)

Aug 01, 2010 | RIM BlackBerry Pearl Flip 8220 Cellular...

1 Answer

When connecting up to charge red light comes on 'power on' button on front and no charging happens - any ideas? thanks


What does indicator light mean?
  • Steady red light: Battery is charging.
  • Steady green light: Battery is fully charged.
  • Flashing red light: Battery needs charging.
  • Flashing green light: The music receiver is switched on.
  • Flashing red/green light: The music receiver is available to be added to your phone.

Aug 24, 2009 | Sony Ericsson T303 Mobile Phone (Shadow...

1 Answer

Digital phone/answering machine


The red blinking light is an 'event' light, it does not necessarily mean a message is waiting for you, it will also start to flash if you have a missed call.
click 'up' on the round button to show the missed calls list and it will stop flashing, at least it does on mine!

Dec 26, 2008 | Philips CD4451S/05 Phone

1 Answer

LG Shine key pads not working at all!


Possible any of your keys are sticked. may be on keypad or in side keys. Check those first.

May 19, 2008 | LG Shine KE970 Cellular Phone

2 Answers

Motorola SLVR buttons do not work


I don't know but mine's doing the exact same thing. Mine also keeps the screen on almost all the time, sometimes it turns itself on and back off and back on for hours. Once every button EXCEPT the red button worked... and once only the top left button worked, so i could answer calls but couldn't hang up. My friends enjoyed messing with me for that one.

Dec 01, 2007 | Motorola Mobility SLVR L7 Cellular Phone

1 Answer

Buttons don't work!


None of the buttons will work. Is there any kind of locking device that maybe we've done and not realize it? The lights come on but you can not answer or press any keys?

Jul 17, 2007 | Samsung SCH-A970 Cellular Phone

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Cell Phones Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

Trisha
Trisha

Level 2 Expert

173 Answers

yadayada
yadayada

Level 3 Expert

71162 Answers

Are you a Motorola Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...