Question about PC Desktops
Try changing the mouse batteries.And reconnect again.
Sandeep Singh Longia.
Posted on Jul 05, 2008
Tips for a great answer:
From the User Guide at... http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=4174137&
The wireless keyboard and mouse are pre-synchronized, for your convenience, to work with your
HP TouchSmart PC. The keyboard and mouse should work immediately after you pull the battery tabs to
activate the preinstalled batteries, and then turn on the mouse (A).
You may need to manually synchronize the wireless keyboard or mouse if they are not functioning.
To synchronize them:
Make sure the keyboard and mouse are next to the HP TouchSmart PC, within 30 cm (1 foot) and
away from interference from other devices.
Keyboard: Press the Connect button on the bottom of the keyboard (B) for five seconds. The blue
activity LED on the wireless receiver illuminates when the synchronization command has been received
and turns off when synchronization is complete.
Mouse: Press the Connect button on the bottom of the mouse (C) for five seconds. The blue activity
LED on the wireless receiver illuminates when the synchronization command has been received and
turns off when synchronization is complete.
If this does not work, remove and then re-insert the wireless keyboard and mouse receiver from the back of
the computer and then synchronize the keyboard and mouse again.
Jun 30, 2014 | PC Desktops
Jul 14, 2008 | PC Desktops
Dec 02, 2008 | PC Desktops
Oct 28, 2008 | PC Desktops
Jul 16, 2008 | PC Desktops
Apr 22, 2008 | PC Desktops
Mar 24, 2008 | PC Desktops
47 people viewed this question
Usually answered in minutes!