I recently bought this bluetooth from a friend of mine and have no manual with it. I've never owned one and am trying to set it up. I get my phone to discover it, but once it's found and it ask if I want to bond with it and I select yes, it ask for a pin number. Where do I go from here?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Well I know for sure the default pin for the M1 is indeed 0000. However I
cannot tell you what the pin would be for your specific bluetooth
dongle. If I where you I would try 0000, 1111, 2222 and so on
As with all Bluetooth headsets,
the H700 needs to be paired with the device before it can be used, which
is done in pairing mode. In pairing mode, the H700 makes a transmission
so that Bluetooth-enabled devices can pick up the device and connect to
the headset. Once connected, no other device can connect with the
Bluetooth headset. To enter pairing mode on the H700, open the headset
boom located near the microphone. After a few seconds the indicator
light will turn purple. Once purple, the H700 is in pairing mode.
Searching for the Device With the M1
Once the H700 is in pairing
mode, have the M1 search for Bluetooth devices. To do this, press
"MENU/OK" and choose "Tools," "Bluetooth," "Add New" and "Search." A
list of Bluetooth devices will show up on the screen. Highlight
"Motorola H700" and press "MENU/OK." Choose "Add to Trusted," enter
"0000" and press "MENU/OK." The devices are now connected and ready to
Testing the Devices
Once the devices are connected,
test that both the phone and the headset are working properly together.
First, place the headset in your ear. Dial a number on the phone and
press "Send." If you can hear ringing, the devices are connected
properly and ready for use.
If the connection was not successful, repeat the previous steps and
try again. Make sure the indicator light is glowing purple and is
steady. If you have connected the headset to a previous device, make
sure that device is turned off so as not to interfere with the
connection procedure. Once the other device is off, close and reopen the
boom to enter pairing mode.
Your "Passcode" is setup when you "Pair" with another Bluetooth appliance.
e.g If you want to connect to your friends phone via bluetooth to send a picture you would send via bluetooth and search for bluetooth device. When you select the one you wish to connect to it will attempt to "Pair" with it. At this point a "Passcode" maybe asked for if the bluetooth device you are pairing with has one set. If it does then you need to ask the person who owns the device for the "Passcode" before your picture can be sent/recieved.
Normally if you wish to set a passcode for your device it will either be in your bluetooth settings. Possibly even in "Security" in the bluetooth settings or it may just be in your "Security" settings.
give the bluetooth an initial charge, turn it on, go to the bluetooth settings on the matrix (refer to the owners manual), its in the menu somewhere, all phones are different. When you get there go to "add device", it will take a moment to find the bluetooth (make sure its on). A list will come up, pick the right bluetooth, then it will ask for a passcode, its default is usually always 0000, hit ok and your done
You have to "pair" your bluetooth device with your phone. This is just a fancy way of saying "sync" with each other. Check your bluetooth headset instructions on how to do this.
I am using a Motorola H700 Bluetooth Headset. To "pair" it with my phone I have to hold down the call button on the actual bluetooth headset itself while the headset is turned off. This puts the headset in "pairing" mode so its ready to detect any phone that wants to sync with it.
Then I have to go to my actual LG CU400 and enable bluetooth settings. Next, go to "Device List" settings and select "new". The phone will scan for the headset. Once the phone detects the headset it will request a numercial passcode. Your bluetooth headset instructions should list this passcode. Enter the passcode and the phone and headset are now connected! I hope this helps. Good Luck!
Is the question really, is your H700 in pair mode? To set this you need to push and hold the big talk button while the boom is closed. once the purple light comes on open the boom to keep the light. Now you can search for it with your cell phone.
Hope this helps and don't forget to rate :)
passkeys should be entered for both devices. like when you are trying to paired your phone with you friend's it would then asked to type in a passkey, you can type in any passkey you like but it should be same combination with your friend's. (so you can use 1234 punch in on yours and your friends need to use 1234 code punch in his phone, so both bluetooth device will be paired successfully).
menu, settings, connectivity, bluetooth, my devices, press down to get to the device you want to delete, press options, then delete.
menu, settings, connectivity, bluetooth, my devices, (should have at the top: search for new devices scrolling). Click that:
h700 bluetooth should be in pairing mode:
hold the center button down and wait for it to turn solid blue: the go back and search for new devices on the phone, when it finds the bluetooth, enter 4 0000 zeros for the passcode. The click if you want it to automatically connect or not.