Question about GE 29869GE2 Digital Answering Machine

1 Answer

Greeting mess box

My greeting message box says it is full. How do I erase it in order to record a new greeting message?

Posted by on

1 Answer

To erase a greeting, press and hold the erase button while you are listening to the greeting. The unit will announce that the greeting has been erased.

Posted on Jul 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model KX-TG4021 - How do I put in a new answering message?


To record a new greeting, you must use the handset. Press Menu and use the Up/Down arrows to reach the "Answering System" line. Press OK and then navigate to the Greeting. Press OK again. Select the line "Record Greeting" and press OK. Select Yes to confirm recording a new greeting and press OK. After the beep, hold the handset about 8" away and speak clearly. Recite the entire message that you wish to record; the message must be under 2 minutes long. Press OK to save the greeting and press End to exit the sub-menu. Make sure that the answering system is on (and set to pick up on fewer rings than any other voice mail system, if your telephone provider offers one, for example). Make sure that the memory is not full. The system can only accept 18 minutes of recordings, including the greetings.

The manual for the KX-TG4021 is available from the product page: http://shop.panasonic.com/support-only/KX-TG4021N.html . The direct link to the manual is http://service.us.panasonic.com/OPERMANPDF/KXTG4011-MUL.PDF . (Note: there are several models that use the same manual.) See page 27 and the subsequent pages. The N indicates the region in which Panasonic sold the model.

I hope this helps

Cindy Wells

Oct 23, 2015 | Panasonic Answering Machines

1 Answer

I want to erase former user's answering message and go back to message that comes with the phone from the factory.


For an iPhone 5 running iOS 7, try this:
(other versions of the iOS may be slightly different)

Click the "Phone" icon (on the bottom row). Next, click the "Voicemail" icon (on the bottom row). Next, click the "Greeting" link (at the top). Next, select "Default" for the greeting. Finally, click "Save" (at the top).

Alternately, you can leave the selection on "Cutsom" and click the "Record" button to record a new personal greeting and then click "Save".

Oct 16, 2013 | Vtech Answering Machines

2 Answers

How do i set the answering system on a uniden 1580-3 phone, mine is just background noise on the answering machine when someone calls in to leave a message


Here is the manual for your phone. You can download the manual and the instructions for setting up your answering machine are on page 43:

http://www.uniden.com/pdf/DECT1580-3om.pdf

Setting Up the Answering System
You can set up your answering system's features from the handset. Only one handset at a time can access the answering system menus.

Note: If you have multiple bases, select the base with answering system you want to access (see page 15).

Recording a Personal Greeting
Your answering system comes with a pre-recorded outgoing message or greeting that plays when you receive a call: "Hello, no one is available to take your call. Please leave a message after the tone." You can record your own personal outgoing greeting. Your recorded greeting must be between two seconds and thirty seconds long.

Press /mute. The system announces the number of new and old messages, then starts to play the messages unless it has no messages.

Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the system is in the command waiting mode.

Press 8 to start the recording. The system announces, "Record greeting." Begin recording after the announcement.

When you finish recording, press 8 again or press 5. You will hear a confirmation tone, and your recorded greeting plays back for you.

Selecting a Greeting

Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. You can
also switch back and forth between the pre-recorded greeting and your own greeting at any time.

Press /mute. The system announces the number of new and old messages, then starts to play the messages unless it has no messages.

Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the system is in the command waiting mode.

Press 6. The system plays the current greeting.

Jun 15, 2011 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

How do I record a greeting on the Uniden cxa/5698?


With the phone in standby, press [greet]. While the preset message is playing, press and hold [greet] again. You will hear the announcement "Record greeting" and a confirmation tone.
If you already have a greeting recorded, you can delete the current one and then record a new greeting. While the current greeting is playing, press (delete). And then start over with the first.
Start recording your message. You will have thirty seconds, and the message counter will count down.
When you are finished recording your greeting, press [greet], (play/stop) or [set]. You hear a confirmation tone, and then your greeting plays back for you.
The full instructions begin on page 45 of the manual.

Jan 06, 2011 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

How to set up Panasonic Answering Machine KX-TG4391


Recording your greeting message You can record your own greeting message (2 minutes max.). 1 {GREETING REC} 2 Within 10 seconds, press {GREETING REC} again. 3 After the base unit beeps, speak clearly about 20 cm away from the MIC. 4 Press {?} (STOP) to stop recording.
Playing back the greeting message Press {GREETING CHECK}.
You can also operate the answering system by pressing dial keys on the handset
Key Operation {^} or {V} Adjust the receiver/speaker volume {1} or {<} Repeat message (during playback)*1 {2} or {>} Skip message (during playback) {4} Play new messages {5} Play all messages {8} Turn answering system on {9} Stop playback*2

Oct 17, 2010 | Panasonic DECT 6.0 Expandable Cordless...

2 Answers

Answering Machine Message


enter answ.mach setup menu
then record greeting submenu
press start soft key
youll hear start recording mess
you have 30 sec v countdown to do message then it automatically uploads

Mar 12, 2008 | Uniden TRU8885 Digital Answering Machine

1 Answer

Greeting was somehow erased


Hi Sherrie, I am sorry to hear about your husband, I will do what I can to help. I am fairly confident on that model that if you push the greeting button, then delete it will erase the message for good. Also, if the memory power failed, then it would reset to the default greeting and erase all messages and greetings. However, if the unit has options for multiple greetings (ie. default greeting, greeting 1, greeting 2, etc., then perhaps the default greeting may have been selected, while your husbands greeting is still there but is recorded under say greeting number 1. If that is the case, you can select it to play his greeting instead of the default greeting to have it play. I would find out for you but my computer is having trouble opening the manual on the Panasonic site, so here is the link. Look under "greetings" in the index. Hope I helped. Thanks, CG http://service.us.panasonic.com/OPERMANPDF/KXTM150B.PDF

Dec 18, 2007 | Panasonic KX-TM150B Digital Answering...

1 Answer

Change Answering Machine message in Lucent 1872 corded phone


Try just pressing down on the greeting button on the answering machine, you will hear the lady say "record greeting" and keep holdong down until you are finished recording the message. When you are done, remove your finger, done!

Nov 19, 2007 | Answering Machines

1 Answer

SW Bell FA-980 Answering Machine


Here is a link to a similar model: http://www.swbfreedomphone.com/ib/ibansw/fa970.pdf Here is what it says: TONE REMOTE OPERATION Remote Security Code To access answering functions from an outside line, you will need to enter the three digit security code located on the bottom of your unit. Write this number on the Remote Access Card, which you can keep in your wallet. Remote Turn On If you forget to turn on your unit: 1. Call your unit from a touch-tone phone. 2. Wait 12-14 rings until the machine answers. 3. The FA970 will automatically answer by playing your greeting. You may hang up the phone, and subsequent calls will be answered. Remote Message Playback 1. Call your unit from a touch-tone telephone. 2. After your FA970 answers, it plays the outgoing greeting and beeps once. Dial your three digit security code within 20 seconds after the beep, pressing and holding each digit for 1-2 seconds. Allow a 2 seconds interval between each digit. 3. Your FA970 will sound one beep to indicate the code was entered correctly. (If there are no beeps, enter your code again.) 4. You can press the following buttons on your keypad: Option Press Playback Mailbox 1 Messages (1) Playback Mailbox 2 Messages (2) Record Memo Message (3) Record New Greeting (8) Turn Off Answer Mode (9) If you press ?1? or ?2? (to playback messages), you have the follow options: Option Press Erase Current Message (0) Repeat Current Message (4) Repeat Previous Message (4) repeatedly Stop Message Playback (5) Skip to Next Message (6) To SAVE messages, hang up the telephone. Note: Your FA970 will sound a series of beeps if there are no messages. Remote Record New Greeting If you press 8 (to record new greeting): 1. When you hear a beep, begin recording your new greeting (up to 30 seconds). 2. When you have finished recording your new greeting, press (5). The unit will beep, and the new greeting will playback to you. 3. Hang up the telephone. Remote Record Memo If you press 3 (to record memo message): 1. Within three seconds of pressing ?3?, press ?1? or ?2? to select Mailbox 1 or Mailbox 2. Otherwise, the memo will be recorded in Mailbox 1. 2. When you hear a beep, begin recording your memo (up to 60 seconds). 3. When you have finished recording your memo message, press (5). 4. The corresponding Mailbox message count will be increased by one. To Retrieve Messages when Recording Memory is Full 1. When the message capacity is full, the unit will sound 3 beeps after answering the phone. 2. Within 20 seconds after the 3 beeps, dial your 3 digit security code. 3. Your FA970 will sound one beep to indicate the code was entered correctly.

Mar 22, 2007 | Southwestern Bell FA970SN Digital...

Not finding what you are looking for?
GE 29869GE2 Digital Answering Machine Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Answering Machines Experts

kakima

Level 3 Expert

96372 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

pbxinc

Level 2 Expert

61 Answers

Are you a GE Answering Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...