Question about Panasonic SDR-S7K Flash Media Camcorder

1 Answer

Downloading the video from a panasonic sdr-s7

I have installed the software that comes with the camera (Motion Studio 1.3E onto my oc (windows XP). Whwn I connect the camera as directed Motion Studio dispalys a message saying that the SD card cannot be recognised. The card is a panasonic 4GB tha came with the camers. I have also tried it with a 2GB SD card.
Any ideas?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You dont need a software. I just plugged the camcorder to the wall socket and clicked on the option PC CONNECT in the camcorder which comes automatically when you plug in. In 'my computer' go to removable device and copy the files and open with windows media player. Anymore problem. Email me : glennlx@yahoo.com

Posted on Sep 14, 2009

  • glennlx Sep 14, 2009

    Try it out. It works

  • rtjoliver Aug 23, 2011

    Thank You Your Information was a great help.

×

6 Suggested Answers

welcomejee
  • 10594 Answers

SOURCE: hey err my panasonic sdr s7 dont work in the night is there any soulutins?

Hi,
Night mode selection is indicated in below picture.
Need further help, please let me know..

fa8cf28.jpg

Posted on Sep 22, 2008

  • 1 Answer

SOURCE: sdr-s7 wont transfer files to mac

I have the same here.
Do we need to install?

Posted on Mar 25, 2009

  • 1335 Answers

SOURCE: SDR S7 panasonic camcorder... lost installation disc

The best solution is to get a replacement CD from Panasonic at
http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/Hard-Disk-Drive/SD-Camcorders/model.SDR-S7A
They may replace the CD at a reasonable cost (or free plus S&H). Otherwise they can suggest other editing software that can upload your recordings to the PC.

Posted on May 26, 2009

VinayT
  • 1884 Answers

SOURCE: Without a panasonic SDR-S7 charger...

Yes as long as the input, output, attachment and the frequecy are the same

Posted on Aug 07, 2009

  • 1 Answer

SOURCE: lost ac power adapter ac cord panasonic sdr-s7 camcorder

Go to Radio Shack, bring your camera, and they will sell you an AC adapter part number: 273-1696 for $30.

Posted on Aug 30, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to Save a Movie From a Panasonic NV-GS11 Video Camera to a PC


I bought my Panasonic NV-GS11 video camera from eBay and for the cost, it seemed perfect. I liked the feel of the camera, it's simplicity of use, until I tried to transfer my movie to a PC and that's when the trouble started!
Normally, when you connect a camera using the USB connection, your PC recognises the device and you can use it straight away. I had no end of problems getting the PC to do this and I thought the driver was at fault.
The answer, in hindsight, is that in the menu there are 2 items for the USB Function, "web camera" and "DV Studio" - the software for acquiring still photos from the camera. Choose "web camera", connect your camera to the PC via the USB connection and switch on the camera using the Playback mode. Check "My Computer" and there should be a video camera icon with "USB Video Device" beside it. Double click onto this icon will open up a page, where if you start your movie from the camera, you can see the results on the PC screen. Unfortunately, there's nowhere on this page where you can save the movie itself.
I searched with Google and found the answer. Many people had the same issue but there didn't seem to any answers. Eventually, I found one reply on a forum way down the page which provided the solution.
Download Windows Movie Maker from the Microsoft page. This is for Windows XP:-
http://www.download.com/Windows-Movie-Maker-Windows-XP-/3000-13631_4-10165075.html
Open Movie Maker and you will see " Capture from video device" This allows you to save your movie into a directory of your choice and later burn the movie onto a CD using your favourite software.

Aug 27, 2010 | Video Cameras

1 Answer

I haveSony DCR-HC19E Digital Video Camera Recorder How to connect to Windows Xp


There is software cd motion Picture Browser supplied with camcorder, install it in PC, hook USB cable with camcorder and PC.

Jul 06, 2009 | Sony Video Cameras

1 Answer

Sony driver update


You can down load the driver for vista of sony DCR- DVD 100E/DVD 200E from the following links


This chart provides compatibility information for software that ships with Sony digital cameras and camcorders.
Note: Not all software applies to all models. If uncertain, please refer to your product manual to determine which software came with your model.


Software Compatible Additional Comments Movie Shaker™ software Ver 3.1 for MICROMV camcorders No N/A Nero® Express 6 No N/A Pixela ImageMixer™ for HDD Camcorder No Please update to Picture Motion Browser Ver. 2.0.11
Note: This software is not applicable to all models. Pixela ImageMixer Ver 1.0 No N/A Pixela ImageMixer Ver 1.5 No N/A Picture Motion Browser Ver 1.1 Yes Some behavior may be different from that of the previous Windows XP operating system environment. *3
Please install the update program for Windows Vista. Picture Motion Browser Ver 2.0.01 – 2.0.06 Yes Some behavior may be different from that of the previous Windows XP operating system environment. *3
Please install the update program for Windows Vista. Picture Motion Browser Ver 2.1.00 – 2.1.01 Yes N/A Pixela Picture Package™ software Ver. 1.0 – 1.7 No Please update to Picture Motion Browser Ver. 2.0.13
Note: This software is not applicable to all models. *2 Pixela Picture Package™ software Ver. 1.8 No Please update to Picture Motion Browser Ver. 2.0.12
Note: This software is not applicable to all models.
    *1 It is not possible to save RAW files in the SRF format with the Image Data Converter SR software.
    *2 It is not possible to create a Video CD using Picture Motion Browser.
    *3 Examples of behavior variances:
    Display -
    • The Picture Motion Browser short-cut icon may become a Windows-standard icon.
    • The tooltip information window may not be transparent.
    • images may not be displayed properly in the browser window while playing back movies.
    • Some images, character, and icons may not be displayed properly.
    Sound -
    • The volume control bar in the browser may not be operational when playing back movies.
    • While playing back movies the sound may not be output.
    Other -
    • Some folders, such as public folders, cannot be registered as Viewed folders.
I hope this will solve your issue.

Good Luck

If my solution proves useful please accept it.

Regards
Arjun

Mar 30, 2009 | Video Cameras

1 Answer

Canon MV890 not being detected


uninstall and reboot if xp sees it then reinstall software and drivers

Feb 01, 2009 | Canon GL2 Mini DV Digital Camcorder

1 Answer

Canon MV890 not being detected by computer


uninstall and see if xp sees it then reinstall software

Feb 01, 2009 | Canon GL2 Mini DV Digital Camcorder

4 Answers

How to Recover/download Software CD for NV-GS35; Panasonic VFF0264-A; MotionDV STUDIO 5.3E LE for DV


I have panasonic Digital video camera model NV-GS25GC
I need driver for windows7 for it thnk you

Dec 24, 2008 | Panasonic NV-GS25 Mini DV Digital...

3 Answers

How do i edit using motionsd studio 1.3e?


I had much the same issues with my Motion SD Studio manual...pretty much useless. On screen help? Forget it...it won't find it. Again..useless.
So the only way I learned to use it was by just digging in and doing it. Once you have it figured out, it really isn't that bad to use. Although it is rather basic as far as editing goes. I quickly outgrew the program and now use Magix Movie Edit Pro 14...MUCH more versatile! But I still need Motion SD to load the files into the computer and render them into the proper format for MEP.

SO the first thing you want to do is load your video clip into the computer. Make sure your power cord is connected to the camera. Then connect the USB cable th the cam and computer. The camera will ask you if you want it to be ""pict-brigge or as a USB drive. Choose USB drive. Cancel out of the window that pops up.
Now start your Motion SD studio software. In a few seconds a box will appear asking you what to do. Yo want to upload files from the camera. Pick this option and a new windoe opens up displaying the videos in your camera on the left and a preview screen on the right. Simply highlight the clips you want to inport and then click the "import" button below the preview screen. This process may take some time depending on the length and number of clips you import.
Once importing is complete, it will ask you if you want to edit the images. Hit YES anf the edit window will open up.
Then drag your clips tio the timeline and begin editing.

I hope this is helpful to anyone having trouble getting thingd going with this software. Remember, I had to learn this on my own due to insufficient manuals and a lack of online help. I can offer further assistance if anyone might need it.

Regards
Rick - Loose Wheel Productions
(NOT affiliated with Panasonic or Motion SD Studio.)

Dec 15, 2008 | Video Cameras

1 Answer

Palmcorder


Connect ur recorder to the computer and see what happens!!
If it is thro' USB normally ur stills come. For dumping however u need 1394 connectivity and then ofcourse windows movie maker or studio 8 s/w. After all, computer can't survive without software.
right?

Nov 28, 2007 | Panasonic Palmcorder PV-GS15 Mini DV...

2 Answers

Panasonic PV-GS19 I canĀ“t download video to pC


MOTION DV STUDIO should work. I can't find the "free" smaller version and have lost the disc that came with cam that had it. Panasonic does not support this cams donwloads on their site. I can only find the for sale versions of MOTION DV STUDIO. I am having the same d*mn problem. I have a PC with Xp with a number of built in editing programs that should be able to capture from firewire and recognize this connection. This cams USB connection captures bad video artifacts during transfer. The only other solution which I can think of is to use a SVHS serial to mini cord (?). I can't find one of these for sale anywhere...if they exist. Any other people having this problem and have solved it without buying a full version of MOTION DV STUDIO? If anyone can upload the free version of basic MOTION DV STUDIO for us to download, that would be awesome. Btw- my laptop will not recognize the firewire connection from the DV camcorder no matter what I try within the hardware connection UI, etc.

Aug 31, 2007 | Panasonic PV-GS19 Mini DV Digital...

Not finding what you are looking for?
Panasonic SDR-S7K Flash Media Camcorder Logo

2,333 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Video Cameras Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Lawrence Oravetz

Level 3 Expert

8001 Answers

abdul rauf
abdul rauf

Level 2 Expert

383 Answers

Are you a Panasonic Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...