Question about Philips 60P8341 60" Rear Projection Television

1 Answer

Remote control The original remote stopped working. I bought a new Philips Universal remote and programmed it. It worked for a few minutes and then stopped working. I did this several times and each time the new remote would work for only a few minutes. Thanks for any help. Gigi

Posted by on

  • habetgigi Jul 05, 2008

    I failed to mention that this is the second new remote control that I have tried. The other one was a universal remote, not a Philips and the same thing happened. I think that it's something with the TV, not the actual remote.

    Any more suggestions?

    Thanks

  • ebbhagan Jul 05, 2008

    I have the same problem. I know that the remote is not the issue because the I have a universal remote that works on everything else and when I use the original remote I have the same problem. The TV works fine for a few minutes and then very sparingly when trying to change channels, volume, etc. I think it might be a loose connection somewhere, but was hoping to get some good advice on the specifics before we call a repairman or fix it myself.



    I have cleaned the remote lens on the TV that doesn't seem to help.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 133 Answers

Try installing a pair of new alkaline batteries into the remote. If the problem persists, I would suspect the remote is defective and return it to the store for a refund. I have used Philips remotes twice before, and had problems with both of them. I switched to a One-for-All universal remote, and it has been trouble-free, so far.











Posted on Jul 05, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the code for programming universal remote for philips 19 in tv model 19PFL3504D/F7


How To Program A Philips Universal Remote ' Codes For ...

codesforuniversalremotes.com/program-philips-universal-remote/
Here is how to Program any Philips Universal Remote Control. Turn on the device you ... Remote Control Codes December 21, 2015 at 1:19 pm. Stephanie,

Codes For Universal Remotes ' Universal Remote Control ...

codesforuniversalremotes.com/
Universal Remote Control Codes For TV & Audio. ... Codes for Philips Universal Remotes · Sanyo TV Codes for Universal Remotes · Codes for .... I have an 19 inch Emerson flat screen and a RCA universal remote. Please help with the code ..

Dec 28, 2015 | Philips Televison & Video

1 Answer

Remote doesn't work


Return ur univeral remotes,try this website 1-800-Remotes Factory original to buy a original remote.

Dec 15, 2009 | RCA Universal Remote Control

1 Answer

Remote will not work tv.i have replaced batts in remote.


If the set-top controls still are working, your remote may have died; it wouldn't be the first one, I've had to replace an original too when it developed a thermal problem requiring a shot of freeze spray inside to make it work for a few minutes.
If the local controls are also not functional, the IR receiver in the set may have died. The output from this module is tied into the same circuit as the set's controls so if that function fails, neither will work.
If you need to replace your remote, don't just buy a 'universal' since none of these really are universal. If you intend to do that, at least check the remote mfr.s site to see if the remote contains the code set for your Philips.
Otherwise, you can nearly always get an original here:
Remotes

Oct 07, 2009 | Philips Televison & Video

1 Answer

Cant get two remotes working for the same garage


You have to program them both at the same time. you have to do this fairly quickly as the programming window is small.

Aug 03, 2009 | Locks & Locksmithing

5 Answers

New RCA RC246 remote with new RCA L40FHD41 TV. Dish remote won't adjust volume. Any ideas?


The Philips Universal Remote SRU4208WM/17 works with this TV. Must use the code learning feature.

Jul 12, 2009 | Universal Remote Control DIRECTV Universal...

2 Answers

Code


Dont worry about programming a universal remote for use with only one device like a Tv because after you program it. only a few functions like the basic functions of the remote will work. for example the "Power", channels keys, and volumn. you will not be able to make that remote work for any other features, like PIP, menu, aspect, input, etc. I suggest getting the original remote control. ReplacementRemotes.com usually has a suitible replacement or the original manufactures remote that comes with your TV.

Jun 07, 2008 | Philips Magnavox Learning Universal Remote

Not finding what you are looking for?
Philips 60P8341 60" Rear Projection Television Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74473 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...