Question about Kirby Ultimate G Bagged Upright Vacuum

2 Answers

How to change a band on a kirby vacuum? - Kirby Ultimate G Bagged Upright Vacuum

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers

I think you mean belt??

Take the nozzle of, remove the brush roll, put the a new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on the front until it locks, when it grabs the belt it will be hard to turn. Re-install the nozzle on the machine and lock it down. Turn the knob again all of the way, this will release the belt unto the pulley.

Posted on Jul 13, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 357 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Kirby is blowing out not sucking in how do I change this?


Either there is a blower option on the vacuum cleaner that needs to be set back to where it belongs, or somebody changed the brushes on the motor and got the brush or field wire connections reversed (one or the other, but not both).

Oct 23, 2011 | Kirby Ultimate G Bagged Upright Vacuum

1 Answer

How do I change a balt on a kirby G 2000 Limited Edition vacuum cleaner


Here is a link to a video showing how to change the belt on a Kirby http://www.totalvac.com/videos/kirby-vacuum-cleaners-videos.htm

Sep 08, 2010 | Kirby Ultimate G Bagged Upright Vacuum

1 Answer

How do we change the belt on our Kirby Vacuum Cleaner


Here is a link to a video explaining how to change the belt on a Kirby vacuum. It is at the bottom of the page
http://www.totalvac.com/videos/kirby-vacuum-cleaners-videos.htm


Jun 02, 2010 | Kirby Heritage II Vacuum

1 Answer

My roller isn't spinning. I think the band is not on correctly.


Hi,
With the vacuum unplugged, flip it over and pull on the belt that runs the roller...if it is loose or comes all the way out...it is broke or has fallen off. Use your instruction manual to replace or install the belt. If you don't have a manual ...click below to look at a video that will help.

http://www.kirby.com/Portals/0/videos.html

Hope this Helps,
RSMITH972278
P.S. PLEASE RATE MY HELP

Nov 25, 2009 | Kirby Ultimate G Bagged Upright Vacuum

1 Answer

The on/off switch on my kirby g-3 vacumn needs to be replaced I would like to know the best procedure.


Get the parts ... locally or at some place like Repairclinic.com then set aside a Saturday afternoon in a quiet place with screw driver, pliers and a box of band aids and go to it.

Repairclinic.com will also provide you with details of the actual procedure at hand.

That is what I think

a

Oct 05, 2009 | Kirby Generation 3 Bagged Upright Vacuum

1 Answer

I am having trouble changing the bag in my generation four kirby. The picture is not helpful...at least for me. Thank you.


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=846276
Generic problem for all Vacuums
I am having trouble changing
Posted by mebrjean on Jul 28, 2008
I am having trouble changing the bag in my Generation Four Kirby. The picture is not helpful...at least for me. Thank you.
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The question is that is it the inside paper bag or the outside cloth bag? The paper bag simply has a cardboard collar and will just push and twist on to the black fill tube inside the cloth bag, the outer cloth bad is a little bit more difficult, it unhooks @ the top of the vacuum and it has a elastic band around the bottom, but on the inside cloth bag there is a ny tie that you have to cut off and remove in order to remove and change the clothe bag and then you need to get another ny tie that is of equal length to re-install the cloth bag, and the black tube sometimes is wired on with a bailing wire of which you can get @ a hardware store or your local vacuum cleaner dealer in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://kirby.com/
Customer Service – U. S. & Canada
1-800-494-8586
Hours 8:00 am to 5:00 pm (EST)
Mail To: Consumer Relations
The Kirby Company
1920 West 114 Street
Cleveland, OH 44102
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 28, 2008 | Vacuums

2 Answers

How to change kirby vacuum belt?


Greetings,

Here's a video where we show you how to replace the suction fan on a Kirby Generation vacuum cleaner (also known as the impeller blade). I hope this video helps;Chris Jones
GoVacuum.com

Jul 20, 2008 | Vacuums

Not finding what you are looking for?
Kirby Ultimate G Bagged Upright Vacuum Logo

Related Topics:

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...