Question about Panasonic KX-TG1033S Cordless Phone

3 Answers

Voicemail I have no new voice mails, but my phone is constantly displaying new voice mail. I check it and the phone tells me there are no new voice mails but it still says new voice mail on the phone.

Posted by on

  • 4 more comments 
  • joseph_howar Jul 11, 2008

    I have the same problem. I've tried going to the Telco's voicemail set up options and turn alerts off and back on. I've gone through the whole menu on the phone and have not been able to find a resolution to this annoying problem.

  • ravi_luck Jul 19, 2008

    I have 2 handsets and the main hand set base keeps flashing the play and answer machine lights, itried to switch off or erase any eisiting message stored but it still does not work. the Network signal keeps blinking and neither of the hand set work at all...please advice

  • cmisskitty91 Sep 23, 2008

    I also have the same problem. I have the answering machine set up to answer after 4 rings which it does, but through out the day I have the message on the display new voice mail. I have never used or plan to use voice mail. I have checked the manual over and over to solve this problem and can't find the answer to this. I did not have this problem with my old phone and do not like having to hold the off button down to erase the message of new voice mail every time I pick the phone up.

  • carriearnold Nov 03, 2008

    I have the SAME problem of my phone blinking vm waiting and NOT being able to access anything about it. TRIED different batteries, recoordinating to main headset (yes we ARE talking about cordless phones) and NOTHING works. HELP!

  • raymond2008 Jan 18, 2009

    yellow light is always flashing,phone says new voice mail,but there is none.

  • Anonymous Mar 18, 2014

    reinstall voice mail, portable phone em6120-2

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Press and hold the "Mute" or "Clear" button until the handset beeps to clear the New Voice Mail allert.

Posted on Jan 21, 2013

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Try replacing the batteries

Posted on Jul 15, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 22 Answers

Is there an answering machine built into your phone?There is an option in most phones to clear voice mail alerts.Unplugging the phone want help if it has battery backup.Phone company voice mail gives you stutter dial tone when you have voice mail waiting so if you do not have stutter dial tone when you pick up your hand set the problem is most likely your phone.you may have to program your other hand set to communicate with the base.I guess were talking about cordless phones.Check your manual.

tk46

Posted on Jul 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Given we don't have the light to indicate a voicemail, how do we know we have one without checking it constantly?


The M7310 will display "Message for you" on the LCD screen when you have a message, provided that the Voice Mail system is configured to provide indication to the phone.

The exact steps to do this will depend on what kind of Voice Mail system you are using on your Nortel PBX.

Apr 12, 2011 | NorStar M7310 Phone

2 Answers

New Voice Mail message


You received a message on the voicemail system provided by your telephone company. To hear the message, dial the voicemail number provided by your service provider (in many cases, this will be your own phone number), and follow the voice instructions for listening to your messages. You need to store the voicemail access # by pressing [MENU], [#] [3],[3],[1] on the handset. To access the voicemail, press [TALK], then softkey [VM]. Depending on your service provider, you may need to clear your voice mailbox to remove the notification.

Apr 12, 2010 | Panasonic KX-TGA101S Cordless Handset

1 Answer

Line one red light constant - voicemail locked up


Sounds like your picking up the handset then pressing the voice mail key, thereby transferring the line to voice mail when you hang up. try pressing the voice mail key before you pick up the hand set.

Mar 25, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

I have a flash and display that indicates I have a voice mail, yet when I dial in to voice mail, I receive a recording that I DON'T have a voice mail. The phone continually flashes, and is driving me...


Could you please post the type of phone system or the type of phone you are using and I'll try to help. When you have a message light but the voicemail says you have no messages it usually means someone in the office set the lamp, not the voicemail system.

Jul 30, 2008 | Phones

1 Answer

Message Display


Your voice mail is probably set to send notification for the first message only. No matter how many are in there, it will only tell you once. You may be able to change the notification type, depending on your voice mail.

May 21, 2008 | Mitel Superset 4025 Corded Phone...

2 Answers

New Voice Mail flashing light


What worked for me was to call my phone from another phone and leave myself a voicemail. I then went in and retrieved and deleted that voicemail. Once I hung up from my voicemail service my handsets reset about 10 seconds later.

I hope this helps!

Apr 05, 2008 | Uniden Cordless Phone

7 Answers

Displays new voice mail and VMWI constantly blinking when no voice mail


Subscriber is T-Mobile@Home. First, cleared all messages from T-Mobile voicemail.

Now to fix your GE phone:


Push the program key. Select Handset Setup Push the program key Select Default Settings Push the program key Select 1 Yes. Push the program key
Hope this helps.

Mar 06, 2008 | Uniden Cordless Phone

1 Answer

"NEW VOICE MAIL" is stuck on screen


what you do is call your own phone number it will tell you to set up a voicemail account and make a 4 digit pin ....once that is made you can listen to the prompts to listen to your voicemail and erase the messege and the phone will get back to its normal self hope this helps

Feb 17, 2008 | GE 25932 Cordless Phone

3 Answers

"New Voice Mail" stuck on screen.


Hi, I have the same problem. I called the service provider, they left a voice message, which I accessed later and deleted from my voicemail box. This took care of it and I dont have that message on the screen now. I think you can just leave yourself a voice message and access it later and delete it. That should resolve it.

Nov 13, 2007 | Phones

4 Answers

New Voice Mail


I have FiOs and used some of the info I gathered from this page to get my voice mail working now! To set up my voice mail I called my phone number (from the house phone), then pressed * when the automated system picked up...Your prompted to use a 4 digit pass code, which is the last 4 digits of your phone number (worked for me). From there I listened to the prompts and created a new "4 digit pw" as well as a "name password" by the end of the cycle. It then allowed me to listen to the messages on the phone and delete them! Phone finally says ready on it.

Oct 07, 2007 | GE 25952 Cordless Phone

Not finding what you are looking for?
Panasonic KX-TG1033S Cordless Phone Logo

1,667 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts

kakima

Level 3 Expert

96576 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...