Question about Hotpoint Ultima WF865 Front Load Washer
If you machine is connected to a sink trap for the waste water to drain through then iot is more than likely to be filling your machine up with dirty water from your sink? I.E. any food or dirty dish water. So you need to make sure that there is a loop in the hose underneath the sink. Higher than the sink trap so the water cannot run into the machine. Failing this then you need to see if your machine has a built in air trap on the waste side from the pump to the waste hose as this sometimes will block up with limescale or general muck from your machine. It just needs taking apart and cleaning!
Posted on Dec 28, 2008
Run a load with no clothes, hot water and a gallon or two of bleach and less then 1 drop, very small amount of dish detergent. the dish detergent is used as surfactant (makes the bleach stick to the interior walls)
run an extra rinse cycle to make sure you get all the bleach out before putting clothes in.
Posted on Jul 04, 2008
Tips for a great answer:
Sep 11, 2011 | Hotpoint Aquarius WF000 Front Load Washer
Jun 16, 2010 | Hotpoint Aquarius WMA42 Front Load Washer
Jun 04, 2010 | Hotpoint Aquarius WF220 Front Load Washer
Jan 08, 2010 | Hotpoint Ultima WF840 Front Load Washer /...
Nov 04, 2009 | Hotpoint Ultima WF860 Front Load Washer
Oct 11, 2009 | Washing Machines
Aug 31, 2009 | Hotpoint Washing Machines
Oct 22, 2008 | Hotpoint Aquarius WF000 Front Load Washer
May 30, 2008 | Hotpoint Ultima WF860 Front Load Washer
Jan 04, 2007 | Indesit W 123 Front Load Washer
219 people viewed this question
Usually answered in minutes!