Question about Whirlpool Ultimate Care II LSQ9564J Top Load Washer
I just inherited a Whirlpool Ultimate Care II washer and there is a lot of lint after washing. How do I clean out the lint filter? I don't know where it is.
SOURCE: lint trap
There should be a rectangular flap on the top panel at the rear right of your dryer. the lint filter is in a chute if there is just a hole here then the filter is missing.
Posted on Mar 15, 2007
lid switch is bad chance are you can by pass this by removing the timer header and crossing the outer wire on the lid switch that it mounted closest to the lid not the power cord this will tell you if you need a switch
Posted on Dec 03, 2007
When you look down into the agitator, are there 4 white plastic points that look slightly melted or otherwise deformed? If so, using a small flat head screw and a small hammer, separate the white plastic from the surrounding translucent plastic. Once you've done that, it should easily pull apart.
Posted on Jul 14, 2010
Tips for a great answer:
Jul 15, 2016 | Washing Machines
Jan 27, 2016 | Washing Machines
Jan 15, 2012 | Whirlpool Ultimate Care II LSQ9549L Top...
Feb 27, 2011 | Whirlpool Ultimate Care II GSQ9669L Top...
May 26, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...
May 16, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...
Jul 30, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...
216 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: