Power cuts off

Hello Leemna
kindly note that a Lack of fuel delivery, blocked fuel filters, or a faulty fuel pump can result in a reduction in engine power.

Question edited to fix jumbled order and add CAPS..

You posted to the Category 'Television and Video'. This an Office Shredder.

'Cross Cut' is what it is, bits too small to put back together. This machine has variable cuts and is designated 'P1, P2'.

Shredders IDEAL 4105

used machine

Specifications

Cutting width: 12mm, 9mm, 6mm, 3mm
Year of construction: 1988-1989
Productivity: approx. 70 sheets (DIN A4, 70g/m²)
Price: on request
Cutting speed: approx. 200 mm/s
the security level: P1 - P2
Power supply: 380 V/2.2 kW
https://www.google.com/search?q=ideal+4105+shredder

..

If it is a gas powered machine and it cuts out when you release the spray gun trigger, it means that your unloader valve is stuck closed.
It would help to have more information about your machine and your problem. Gas or electric? Does it start up and run fine or cut out a few seconds after starting? Does it cut out when you release the trigger?
Does it cut out while spraying?

Hello Kay. Is this a single or double dishdrawer? When the power cuct out, does it go dead, no lights, nothing? My first action would be to check the power connections at the, whats called a filter board. this is the first device that power runs to.

Unfortunately, replacing a sensor only fixes the problem about half the time. The code means the computer is not getting a signal from the sensor, not that the sensor has failed.
The problem could be in the wiring, or the part that the sensor gets the signal from.

you cut cord have open circuit.your electrical cord has three wires neutral wire white wire black wires hot wire and bare wire for ground. if you cut either neutral wire or hot black wire in the electrical cord no power can flow to trimmer motor if you cut wire need to fix wire to get trimmer work again.

What is the complete model number of the unit?

get a electric tape then roll it to the cut cord and then it will fixed for several days

Hi

Before other checking change the spring of the clutch(2).

best regards savumihai71

if your light also cuts out intermittenly sounds like a loose connection, when heated moves and loses contact, def check wiring