Question about Audio Players & Recorders

1 Answer

Pc speakers will not play on my computer - Audio Players & Recorders

Posted by on

  • alesi17 Mar 14, 2009

    my pc speakers will not work. They are not the speakers. I have attempted to connect two seperate sets. I have made sure they were plugged into the green socket and adjusted the volume control. One set of speakers has a light that turns on when power is on. That light is not lit.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 682 Answers

1-confirm that you put it in right place(almost green socket).
2-right click in speaker icon and open volume control.
3-confirm that volume control fader is in up position and not muted.
4-check all faders are up and not muted.
5-you must confirm first that your speaker is ok first(try with another speaker)

Posted on Jul 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ext in problem


if you are using the ext in then it has to be something wrong with the setup from the pc. The receiver does nothing to the ext in input except amplify it and put it out to the speakers.

Jan 14, 2014 | Denon AVR-1907 Receiver

1 Answer

My reciever plays then cuts out


They don't overload from missing speakers. I'm curious, what buggered the one speaker?

Examine all of your speaker wires carefully to be sure no unintended contact is made between them and anything else.

Is "overload" being displayed?

“OVERLOAD” starts flashing on the display.

Speakers are overloaded because of high volume.

1. Press STANDBY/ON on the front panel to turn off the receiver.
2. Stop the playback source.
3. Turn on the receiver again, and adjust the volume.
----------------
Speakers are overloaded because of short circuit of speaker terminals.

Press STANDBY/ON on the front panel, then check the speaker wiring.

If “OVERLOAD” does not disappear after turning on the receiver again, unplug the AC power cord, then plug it back in again.
If speaker wiring is not short-circuited, contact your dealer.

Mar 31, 2010 | JVC RX-6042 Receiver

2 Answers

Lux Audio 5.1 home theater speaker & Yamaha HTR 5540 AMP


configure ur PC (both OS audio and third party sound driver) for surround sounds. control panel- sounds and audio devices - speaker settings - advanced - speker settings. so this done. make sure u select the 6 input channel - the button is on the right edge near the volume knob. near the vol button there are two buttons for selecting input type with up down arrow. from that u can select the input type this will be indicated on the top front indicator. but with the 6 input channel selected all selections are preceeded. if u select stereo mode u will have left/ right audio only.
make sure u connect the input right. connect from computer to 6 channel input. main, surround, center and sub-woofer.  connect the spekers to main (L/R), rear(surround) (L/R), center and sub woofer to terminal marked sub woofer ouput. this done select like i said before the 6 channel button. that should do it.

Mar 13, 2010 | Yamaha HTR-5540 Receiver

1 Answer

Line in / Mic jack help


So we're talking PC here, right?

I don't understand what you want to record. Going from the PC Headphone jack to the PC Line IN might be unwise in order to prevent a feedback loop. External (non-PC) source and PC MIC might work but you would probably want to monitor it on headphones again because of possibe feedback.

Does your MIC work?

Right click the speaker icon again and select Adjust Audio Properties or open Control Panel and select Sounds & Audio Devices. Select the box to place the icon on the Taskbar for future use.


Right click on the little speaker icon in your Taskbar and select Open Volume Control, if it's there. From there you're on your own. I have a sound card so I don't know what you will see. Look around, there may be a bunch of audio outputs and inputs with Master and individual volume & balance controls plus one for your Mic. Make sure it's not muted.


Apr 21, 2009 | Audio Players & Recorders

1 Answer

When im playing my vinal it come out in stereo but when i download it to the computer it plays in mono what im i doing wrong the system i have is prolectrix usb three speed turn table hope you can help...


if you open edit/preferences in audacity you can select the stereo option, make sure that windows/control panel/audio out is set for your pc sound system and not the usb turntable, as was in my case, there is no speakers on that.. jacko

Mar 05, 2009 | Teac DRH300DAB Receiver

1 Answer

Onkyo SR606 - Loud Poping


It could be a number of things,
1. an electrical short in the house. Try plugging it into another circuit with an extension cord.
2. A bad RCA cable that is input from one of your sources.
3. its probably a bad unit if you have Zone one and two playing at the same time the same source, but it only happens on zone 1.
4. a bad speaker can make a poping like sound, does it happen on all speakers? unplug all but one and one at a time try to determine if the problem sticks, if not, then one of the speakers is out of phase or blown.
5. Playing music froma computer source will sometimes make a pop if your computer is slow or bogged down with checking emails..etc. mine sometimes studders PPPPPPPrioRRRRRity CCCCCLLLLLLLLEEEEERRRRANCCCEE AAAAAAALLLLPPPPPHAAAA OOOOOOONE.
it also pops real loud when booting or shutting down.
Personal note ........windows is such a hassle for Media systems.


I hope something here helps!


Charles




Dec 31, 2008 | Onkyo TX-SR606 Receiver

1 Answer

When I try to play an audio file on my computer, it says that it seems that no sound device is installed or working on my computer. What's a sound device and how can I solve this problem ?


a sound device is a dedicated board the fits in a free PCI slot(inside the PC) and produces all of the sounds once connected to a set of speakers, hifi unit,some newer PC's come with built in sound cards

not all cards are the same quality some are standard stereo and some are full theatre quality(dolby,THX etc)
so its wise to find a solution for your needs as many aspects of newer cards may never be needed

maybe you have a sound card in your system and have not yet installed drivers if you right click on my computer(on desktop) and use the properties in the menu,you will see a new box ,goto the HARDWARE tab and then the DEVICE MANAGER tab
click the + next to sound,video,gamecontrollers

if u see any mention of an audio device right clickit and select UPDATE DRIVER

but remember a sound card must be connected to speakers or a hifi unit to produce the sound

Jul 27, 2008 | Audio Players & Recorders

1 Answer

Zone 2 speakers will play from tuner but not from cd player


I have the denon as well two zones. 5 speakers inside and 2 speakers outside- can you play both zones at once? meaning can i watch tv in the 5 zone area inside. And play my IPOD in the outside speakers at the same time? PLEASE HELP! thx

May 24, 2008 | Denon AVR-1803 Receiver

1 Answer

Speaker Trouble


Michael,

Not being an expert, but having years of experience with electronics, I would think there may be a bad wire connection for the CD unit or a bad unit. If the CD unit is on your PC, you can check the internal connections. There should be a heavier gauge power supply cable and a lighter gauge signal connector. It could be loose at the CD unit or the motherboard. Use an anti-static wrist strap and make sure the power is off. Your cable might be bad and they are easily purchased and replaced. If it is on your "stereo", then check the RCA jacks. You can reverse the left and right RCA jacks to see if the problem is still in the same channel. You could also connect the CD to another line input on your receiver and see if the problem persists.

Mike

Mar 24, 2008 | Audio Players & Recorders

1 Answer

SH-550T


The Camera has no speaker therefore you can't hear anything. I presume that when you play the recording back through your computer you should hear it through the computer's speakers.

Mar 18, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98921 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69955 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...