Question about Car Audio Receivers

5 Answers

JVC KD-AVX44 no sound in normal mode

I've just installed this unit and there is no sound in normal mode but as I switch on the DUAL mode the sound comes out fine, I am using ISO connectors and 2nd audio out is not in use also there's an external amp connected to the woofer out to power the sub-woofer. the main issue is most of the features like USB and bluetooth dont work in DUAL mode so there is no sound when I connect my phone via bluetooth or USB drive.
Any help is much appreciated.

Posted by on

  • 3 more comments 
  • aqeel60 Jul 04, 2008

    Hi Lee,

    it says AVX44 only, I dont see any J or C. full model is KD-AVX44

    thanks, Aqeel

  • aqeel60 Jul 05, 2008

    Hi Maklean, thanks for the link, I've already scanned through the maunal some 10 times but couldn't find what I am missing, is there anything in particular you can point in the manual. thanks, Aqeel

  • aqeel60 Jul 05, 2008

    I've reset it plenty of times but no luck... no sound in normal mode, works in dual mode only.

  • aqeel60 Jul 11, 2008

    Hi, I've installed the unit in my other car today and to my surprise everything's working fine. I compared the ISO connectors of my both cars and there seems to be one wire missing in my merc, according to the manual it should connect to car's light control switch. Can someone point my to the right direction how shall I connect this? whats the light control switch and what If there's none in my car?. thanks

  • aqeel60 Jul 11, 2008

    What a shame, none of the experts were able to help me out... yeah even JVC guys,

    here's the solution in case someone else faces the same problem.

    Disconnect the blue(car aerial) and orange(light switch) wires from ISO connector... there should be only 3 wires connected, Black (Ground), Yellow (+12v direct), Red (+12v through ignition switch), and everything will work fine...

    Took me a month and costed me more than £50 to figured this out... so appereciate this guys.

×

5 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 230 Answers

It seems to be some problem with the main board so check with that with the help of mechanic,because repairing by own will void warranty. If u have warranty then go for it

Posted on Jul 11, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 497 Answers

Assalamu allaikum
hi, aqeel
it seems to be there is some programing problem with the main board so u jus cant do it by ur self u need tecnical help from a proffesional mechanic coz i came across the same problem with another product.....

Posted on Jul 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

Try to reformat the unit ,maybe when installing the software is corrupted,thats not function normally...

Posted on Jul 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,665 Answers

Have a look at page 3 of manual below for instructions
http://akamaipix.crutchfield.com/Manuals/105/105KDAVX44.PDF

Posted on Jul 05, 2008

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

Is it as 44c or a 44j?
thanks,
Lee

Posted on Jul 04, 2008

  • Lee A.
    Lee A. Jul 19, 2008

    I am sure most people were assuming the stereo was installed correctly. Good to hear you got it working.
    Enjoy,
    Lee


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn my jvc kd-g200 to aux mode?


Thi JVC KD-G200 does not have an auxiliary input, or aux mode. If you want to play audio from an external device through this unit, you will need a FM transceiver.

Mar 03, 2011 | JVC KD-G200 CD Player

2 Answers

Does anyone know how to adjust the treble and bass on a JVC KD-G340???


jvc.com, audio car bottom of page click support, model search type in your model number and you will find what you are looking for.

Nov 05, 2009 | JVC KD-G340 Car CD/ MP3 Player

1 Answer

JVC KD-SH9101 RESET06 and the front panel don't move normally


ok from what i can gather it sounds like something broke inside the unit and you might wanna replace it. Im sure you can find a much better radio really cheap. I had a similar JVC model and it gave me headaches. I think you will love this model instead. Trust me its soooo much better and priced really well for its capabilities.

JVC KD-R800 30K Color-Illumination Single-DIN CD Receiver with Dual USB 2.0 for iPod/iPhone and Bluetooth

Aug 31, 2009 | JVC AM FM CD DET FACE CAR STEREO

1 Answer

Set clock on radio


Hello atesha23,

Below is the step-by-step procedure for setting the JVC clock. Please note that after you have entered the PSM mode, if you have not pressed a button for about 2 seconds, the radio will automatically exit the mode and return to normal operating mode. In that case, you must restart PSM by holding the "SEL" button until the display changes.

(1). Enter the PSM mode by pressing and holding the
SEL button until the display changes.
(2). Use the rocker switch left/right until "CLOCK
H" is displayed.
(3) Set the clock hours by turning the volume
control up/down.
(4) Press the rocker switch again until "CLOCK M"
is displayed.
(5) Set the clock minutes by turning the volume
control up/down.
(6) Press the SEL button to finish and EXIT.

Hope this helps.

Mar 31, 2009 | JVC KD-G140 Car CD Player

2 Answers

Jvc kd s 6060


You need to swap the ignition live and permanent live around. If you have a vauxhall the car stereo wiring is the opposite way round to everyone else! Some Rovers have it aswell.

Jan 11, 2009 | JVC KD-S6060 CD Player

1 Answer

Kd-adv38


Sorry for the delay in response. i was speaking to a JVC service center techie here and he said that this is normal. You have to manually switch the view. It does not happen automatically, and is done for safety reasons..

Nov 07, 2008 | Car Audio Receivers

3 Answers

Help with installation for car audio jvc model no. kd s585


HOW TO HOOK UP A JVC CAR CD PLAYER TO A 1993 COUGAR

Jan 12, 2008 | JVC KD-S580 CD Player

Not finding what you are looking for?
Car Audio Receivers Logo

Related Topics:

471 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...