Question about HP PSC 2355 All-In-One InkJet Printer

1 Answer

Error: 0xb9dlbf0a My HP PSC 2355 is not working at all. It started with receiving the error code in the subject line and now I can;t even get the error code to replicate and have not been able to get the printer to even make it past the start-up screen. HELP!!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 25 Answers

These error codes indicate that the product has an internal condition. Solution Use the instructions below to resolve the issue by restarting the product.

  1. Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on.
  2. Open the cover of the product and remove the print cartridges.
  3. Close the cover and wait for the Insert Ink Cartridges message to display.
  4. Disconnect the power cord from the back of the product and wait for one minute.
  5. Reconnect the power cord. If the product does not automatically turn on, press the Power button.
  6. Open the cover and reinsert the print cartridges.
  7. Close the cover. If prompted, print a calibration page.
  8. Reconnect the USB cable, and try to print a print job from the computer.
If these steps did not resolve the issue, contact HP technical support for assistance.

Posted on Jul 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am getting the Error:0x88052ce6 and it starts printing and stops in the middle.


Remove cartrdiges, usb cable & power cable wait for coupple of minutes, gives power wait until cartridges missed message appears, load cartridges, wait for ewady mode, connect USB cable shoot print comman..
If error presists submit in service center..

Feb 02, 2012 | HP PSC 2355 All-In-One InkJet Printer

1 Answer

Error Message On Hp PSC 2355


Hi I found this I know your error not in here but it may work for It worth a try nothing to lose and it may work. I know your error code is not in this but it some times it clean the error with this type of error number you can gave it a go try it not harm it Error code: 0xc18a0201, 0xc18a0206, 0xc18a0306, 0xc18a030a, 0xd0620130, 0x887dd03a, 0xd05d010d, 0xf0af8004, 0xc19ac3ff, 0xc18a050...

Reset the product:
1. Without turning off the product, disconnect the USB cable from the rear of the product.
2. Remove the cartridges from the product.
3. Wait for the 'Insert Cartridges ' message to display on the control panel.
4. Disconnect the power cord from the back of the product.
5. Wait 60 seconds.
6. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
7. Reinsert the cartridges, and then close any open doors on the product.
8. If you receive a prompt to print a calibration page, do so.
9. Reconnect the USB cable to the rear of the product, and then try printing again.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Feb 18, 2010 | HP PSC 2355 All-In-One InkJet Printer

1 Answer

Error code Ox88108508. Printer starts to print then stops. Error code pops up even when computer is turned off


hhhmmm try to download a resstter for your printer model, cause that error code cud mean that some part of your printer has reach its limits, printers nowadays have a counter in it. if you cant find any resetter software for your printer you shoukd call the HP tech. support cause they are the only who knows the right key combination on your printer panel that allows the parts to be reset.

for more help visit Cbr tech solutions

Dec 07, 2009 | HP PSC 2355 All-In-One InkJet Printer

1 Answer

Hp 2355 internal error


try to boot in safe mode windows,, and then uninstall the hp drivers,, and again install.

Sep 27, 2009 | HP PSC 2355 All-In-One InkJet Printer

1 Answer

Error:0x88107b28 1:?V


Hello ddavis71.

Thank God (and programmers) for incorporating error codes.

FYI: There's another extremely active FixYa post that's remarkably consistent in its trouble description as well as its solution.

I do realize that they are not declaring your stated printer ("PSC 2355 All-In-One InkJet Printer"), but I'm guessing that maybe your post was placed in error. Regardless, even it its not, the odds that this is not your trouble and solution as well is remote. I say that because within the entire Google crawled web, that precise error code is found only in that one post.

However, if your device is still under warranty, then of course take that course of action.

Good luck, and thanks in advance for posting back ...
  • to let me (and others) know how things worked out.
  • to provide clarification or feedback.
  • if you have any further questions.
"Today's the best day of my life...and NOW you're part of it!".
Via con Dios and Godspeed -- Craig

Sep 21, 2009 | HP PSC 2355 All-In-One InkJet Printer

1 Answer

HP PSC 2355 Printer not working


reinstall your system right now... or reformat the windows

Jun 17, 2009 | HP Hewlett Packard LaserJet 5200 Printer

1 Answer

Error:0xb9000027


with my pc hooked up to the printer i get error
codes on it it is a psc 2355v all in one

May 12, 2009 | HP PSC 2355 All-In-One InkJet Printer

2 Answers

HP PSC 2355xi printer error code


temporarily, you may be able to make the unit work again but the error will re-appear some other time. this will be up to HP if they can or will repair this kind of error.

1) unplug the power supply
2) hold the # and 6 key down while plugging it back in
3) then try to reconnect to the device and do a test operation to see if it will work

hope this helps...

Sep 30, 2008 | HP PSC 2355 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 2355 All-In-One InkJet Printer Logo

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1121 Answers

Seeker5211
Seeker5211

Level 3 Expert

1088 Answers

kakima

Level 3 Expert

98796 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...