Question about Dell W2300 23 in. HD-Ready LCD Television

1 Answer

Display continueuly changes

Problem started with input display staying on, now on screen menu constantly changing by itself. Every menu/button option will change on screen without touching remote. Changing channels, input, scrolling menu. Any ideas? Thanks

Posted by on

  • tek54 Jul 06, 2008

    Not the problem. Disconnected for days and as soon as plugged in screen goes crazy! I need a schematic!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,296 Answers

Unplug your device for about 30 minutes to let the circuitry reset itself.
If it works normally after that, it means a hardware part(s) is overheating inside, more likely a power supply is starting to fail and does not provide the proper voltages for the microprocessor.

Posted on Jul 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 60" Samsung led TV. Model number UN60EH6003F/type UN60EH6003. The TV turns on but doesn't show a picture. You can see the screen light up but stays a black background. Which board is bad?


well 1st before id go changing any parts I look at weather or not the input is selected correctly over to the input that im providing a known good picture signal with (antenna,cablebox,etc.), you'd be surprised how many times I get a call and I go and use the input select buttons on set itself (NOT REMOTE) and whhoolaaaa! there it is , of course I always hear next I didn't change that !!
a short comings of todays modern TV's if you arnt having any signal into it ,the screen is black and the set-up menu wont display on a black screen

Oct 27, 2015 | Samsung Televison & Video

4 Answers

My volume display stays on


Hi,

The Tv needs to be serviced by a technician.Probably there is a problem with the circuits inside.

Apr 12, 2008 | Televison & Video

1 Answer

I have a toshiba 43ax60 has sound no picture and the power light stays on when powered


you need to explore menue for tv options and select the proper input as well as other options.

Sep 17, 2012 | Toshiba 43AX60 43" Rear Projection...

2 Answers

AV in corner of screen will not disappear anymore


click the i botton on the remote and it will go away

Apr 14, 2009 | Televison & Video

1 Answer

Cannot get tv out of stand by mode..


upon hitting the power button, the red light showing on the front of the tv should flash a couple of times, the screen should come on and the light goes off..the red "stand by " light stays on and we cannot get the screen to come up..needless to say, cannot get to the menu to change any display options...any suggestions?

Apr 10, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Unable to bring up the setup screen for display option


can't get the frame to cut off and start back up to show the setup program

Apr 02, 2009 | PANDIGITAL PAN80-2 (892235000548) Digital...

2 Answers

Mitsubishi tv


I found this online somewhere and it cleared my problem.

(my problem was a blue screen that said my input was locked enter in your code using the 10 key pad. Both inputs were locked, I used the steps below and it cleared it. We are now watching a dvd for the first time in months!) Thank you Bob Waterman whoever you are!)


MITSUBISHI CS3114R

Parental Lock



This system can lock each channel or different channels on ANT A and ANT B
as well as locking each of the EXT inputs, so you should confirm what is
locked before trying to unlock.

1 On the remote, set the TV/VCR switch to the TV position
Or . Depending on which remote is being used
Press the TV mode button at the top.

2. Turn on the TV and using the SCAN buttons (or 10 KEY FAD) and the INPUT
buttons check each channel and input to establish which channels and inputs
are locked. The screen will tell you if the channel or input is locked.

3. Press the button labeled MENU. The screen will show the main TV menu.

4. Press the #5 button (channel lock option).
The screen will change to show the channel lock System Menu. This screen
will indicate that the lock system is either ON or OFF.

IF THE SCREEN INDICATES LOCK IS ON, GO TO STEP 5
OR:
IF THE SCREEN INDICATES THE LOCK IS OFF, GO TO STEP 5A

5. Press the #3 button. (SELECT CHANNELS TO LOCK option). The screen will
ask for the code number. Press the #9 and QV buttons at the same time.

Notes: The screen will change to show an information display that will show
the selected antenna and channel or input. The display is superimposed over
the picture. This display will indicate that the channel or input is either
locked or unlocked. In the lower middle will be instructions to use the
10-key pad or SCAN buttons to select the desired channels (or the INPUT
button to change antennas or select the EXT inputs). At the bottom of the
screen will be instructions on how to change the current LOCK status (if
unlocked use the ENTER button to lock, or if locked use the CANCEL button to
unlock).

NOW GO TO STEP #6.

5a. Press the #1 button (channel lock ON option). The screen will ask for a
code number. Use the 10-KEY PAD to enter a new code number (We suggest 1111)
and then press the ENTER button.

Notes: The screen will change to show an information display that will show
the selected antenna and channel or input. The display is superimposed over
the picture. This display will indicate that the channel or input is either
locked or unlocked. In the lower middle will be instructions to use the
10-key pad or SCAN buttons to select the desired channels (or the INPUT
button to change antennas or select the EXT inputs). At the bottom of the
screen will be instructions on how to change the current LOCK status (if
unlocked use the ENTER button to lock, or if locked use the CANCEL button to
unlock).

NOW GO TO STEP #6.

6. Use the 10 KEY PAD or SCAN buttons to select the channels that are
locked, or, use the INPUT button to select the external inputs that are
locked.

7. At each locked channel or input press the CANCEL button.
The screen will indicate that the channel or input is either locked or
unlocked.

8. When all of the channels and/or inputs are unlocked, press the MENU
button again. TV main menu will be displayed.

9. Press the #5 button (CHANNEL LOCK option).

10. Press the #2 button (channel lock OFF option). The screen will now ask
for a code number again.

11. Press the #9 and QV buttons at the same time. The screen will return
to the CHANNEL LOCK MENU and indicate that the lock is OFF

12. Press the MENU button twice to return to normal viewing.

The parental lock is now entirely cancelled.

---------------------------------------------------------------

Bob Waterman, CET® #RI-28
Master Technician License #9109
Service Manager / Parts Manager
Gemini Computer, TV, & Security Alarms
(508)695-7302
(508)695-7769 FAX
geminitv@xxxxxxxxxxxxxxxx
geminitv@xxxxxxx
www.geminicomputertvsecurityalarms.com

Nov 18, 2007 | Mitsubishi VS-5043 50" Rear Projection...

2 Answers

Mitsubishi tv


Without the code, you must get an original remote and press the "QV" and the "9" buttons together to unlock the TV.

Oct 16, 2007 | Televison & Video

1 Answer

Blank Screen


Can you see anything at on but dimly? If so thats is the backlight tube If you cannot see anything then it is a major fault eitherway a repair shop job I should think

May 30, 2007 | HP L1902 19" LCD Monitor

Not finding what you are looking for?
Dell W2300 23 in. HD-Ready LCD Television Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Are you a Dell Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...