Question about Cable_and_wireless CWD4901 Cordless Expansion Handset

4 Answers

Cable and Wireless CWD4900SE

I have just inherited this 2 handset telephone from my parents but with no operating instructions at all. I wanted to know how to record an answerphone message and how I operate the answerphone on the base unit. Also would LOVE to get my hands on the orginal/copy of the operating manual if you could point me in the right direction of where to get one from? Many thanks. M.Allender London

Posted by on

  • maryb3 Jan 20, 2009

    I have inherited cable and wireless cwd4900se digital answering system but have no instruction manual. would love to be able use it.

  • Anonymous Apr 12, 2009

    CWD4901SE power was off for few hours, now its not working. not connecting to the base.

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi to record a new answerphone message you press and hold down the 'stop' button on the phone base, then speak and let go when you finish speaking. Hope this helps :)

Posted on Mar 26, 2012

  • tristessacat Mar 26, 2012

    Also to set the time you press the delete key and hold, after she says the day twice if it's wrong press the play/memo button in quick succession until she says the right day then let go of both buttons. To set date hold delete key down then press it once after she says the day twice to get make her say the date, then hold down and change with play/memo and then to do time do same again with time. A big diddly but doable.

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a manual for the cordless CWD499SE if you need info Ill be glad to scan the pages and email to you

Posted on Sep 18, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How to off key locked?

Posted on Sep 04, 2011

We inherited the CWD4900SE with the house we are letting (August 2008). I found a similar operating manual that is helping me. If you go to the FixYa home page and enter CWD4901SE, a request entitled "Phone Locked, Please Help" is displayed. When you click on it, you will see a best solution at the bottom. There is a link to a user manual for a CWD4901SE. This has been really helpful to me since I could not find one specifically for the CWD4900SE to download.

sandra

Posted on Sep 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Want to be clear about the handset and telephone base set because base set is not responding to handset.


The base needs to be plugged into the wall for power and have a working phone line.

Oct 16, 2014 | Lands Phones

Tip

Windows error messages


"Operation has been cancelled due to restrictions in effect on this computer"

start >run>regedit
go to: REGEDIT - registry editor
When in registry editor: HKEY_CURRENT_USER – right click for permissions
Advanced Security Settings under 1st tab permissions
You will probably get this error message, "You can't remove restricted because this object is inheriting permissions from its parent.
To remove restricted, you must prevent this object from inheriting permissions. Turn off the option for inheriting permissions, and then try removing RESTRICTED again.
· Unclick: include inheritable permissions from this object’s parent
· Windows security warning: options to add/ remove/ cancel
· Click Remove inherited parent permissions
Denied all access
Continue – delete restricted
Once removed,
Follow this path in registry editor:
HKEY_CURRENT_USERS\software\classes\.html
Right click (Default)
Change value data from (in my case Chrome – it could be Firefox as well):
From: ChromeHTML To: htmlfile
From: FirefoxHTML To: htmlfile
Repeat steps for .htm, .shtml, .xht if they exist
RESTART COMPUTER





on Feb 07, 2010 | Computers & Internet

1 Answer

CWD4900SE


If you need a manual, try contacting Cable & Wireless directly.

Jun 14, 2014 | Cable_and_wireless CWD4901 Cordless...

1 Answer

CWD4900SE Cable & Wireless Digital Answerphone - lost the user guide/manual. Can anyone advise, how to delete previous 'welcome' message', or if this is a case of new one automatically


You are listed in the catagory of Cars and Trucks. Resubmit under the proper catagory or Browse the Web by topic "CWD4900SE" or add Owners Manual or some variation. You may be pleasantly surprized by the Web search.

I hope my solution is helpful.

Aug 05, 2012 | Cars & Trucks

2 Answers

Vtech 6.0 deregister


Getting startedReplace a handsetIf you want to replace a handset or reassign the designated handset numberof a registered handset, you must deregister all the handsets and thenindividually register each handset.To make deregistration easier, read all of the instructions on this page beforeyou begin. To deregister all handsets:Press and hold FIND HANDSET on the telephone base for about 101.seconds (until the IN USE light on the telephone base turns on and starts toflash), then release FIND HANDSET.Press and release FIND HANDSET again. You must press FIND HANDSET2.while the IN USE light is still flashing. The IN USE light flashes forapproximately seven seconds.All system handsets show CONNECTING... The deregistration process3.takes about 10 seconds to complete. All handsets show NOT REGISTEREDwhen the deregistration completes.If deregistration fails, you might need to reset the telephone and try again.To reset:1.Pick up the registered handset and then press talk/flash.Press OFF/CLEAR and place the handset back in the telephone base.2.-OR-1.Unplug the power from the telephone base, then plug it back in.You cannot deregister a handset if any system handset is in use.

May 29, 2010 | Vtech Cordless 6041 Phone

1 Answer

Uniden DECT 6.0 - 2 Handset


You may have to manually "register" your handsets to the base. This is supposed to do it automatically but there are instructions for "registering" your handsets if the automatic feature fails or you add a new base, etc. Consult your owner manual for instructions.

Nov 29, 2008 | Uniden DECT 6.0 Cordless Telephone...

2 Answers

Canon MP530 receive fax issues


Receive Mode Settings Select from the following receive mode options to suit your needs. Once you've decided on which receive mode to use, follow the below instructions to set the receive mode using the operation panel. Receive Mode Setting
  1. Press the <FAX> button to enter Fax mode.
  2. Press <Menu>.
  3. Press the right or left arrow button to select [Receive mode settings], then press the <OK> button.
  4. Press the up or down arrow to select the receive mode that best suits your needs, then press <OK>.

Types of receive mode
Select the receive mode according to your needs.
Receive mode
Purpose
FAX/TEL AUTO SW When you want to receive faxes automatically as well as voice calls. FAX ONLY MODE When you want to receive only faxes automatically with your machine, or have a dedicated telephone line for FAX use only. DRPD When you have subscribed to a DRPD service with your telephone company. MANUAL MODE When you receive mainly voice calls and sometimes faxes, or want to receive faxes manually. ANS.MACHINE MODE When you want to receive voice messages on your answering machine and receive faxes automatically. FAX/TEL auto switch
FAX :
The machine does not ring but will receive the fax automatically. Voice call :
The phone attached to the machine will ring. Pick up the handset to answer the call. Note:
  • Ring start timing and Telephone ring length can be specified in FAX/TEL auto switch in the Receive mode settings.
  • If you want the telephone to ring when it receives a fax, connect a telephone to your machine and enable the Incoming ring settings in RX settings.
  • The phone attached to the machine may not ring depending on the telephone type you are using.

FAX only
FAX * :
The telephone does not ring. The machine will receive the fax automatically. Voice call :
You will not be able to answer the call. * If you want the telephone to ring, connect the telephone to your machine and enable the Incoming ring settings in RX settings menu.


DRPD
FAX :
Your telephone line will ring according to the ring pattern you have chosen and receive the fax automatically. Voice call :
Your telephone line will ring according to the ring pattern you have chosen. Pick up the handset to answer the call. Note: Specify the FAX pattern in the DRPD: Set FAX ring pat. in RX settings menu.

Manual RX
FAX :
The telephone attached to the machine will ring. Pick up the handset and if you hear a beep tone, press the <Color> or <Black> button on the machine to receive the fax. Voice call :
The telephone attached to the machine will ring. Pick up the handset to answer the call. Note: If you are far from your machine, you can use the remote receiving function to receive faxes. Pick up the handset of the telephone connected to the machine and press 25 (the remote receiving ID).

Ans. machine connect
FAX :
First the answering machine connected to your machine will respond to an incoming call, and then the machine will receive faxes automatically. Voice call :
The answering machine connected to your machine will respond to an incoming call. Note:
  • Set the answering machine to answer on the first or second ring.
  • The entire message should be no longer than 15

Nov 24, 2008 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Connecting headset to phone


Setup the Plantronics CS60 wireless headset as follows:

  • Locate the 2 ports on the bottom of the CS60 charging base. One has an icon of a "full telephone" and the other has an icon of a "hand receiver."
  • Unplug the hand receiver from the base of your existing telephone and plug it into the "hand receiver" port on the CS60 base unit.
  • Then take the short cable that came with the CS60 and plug it into the "full telephone" port on the base of the CS60.
  • Plug the other end of the short cord into the hand receiver port of your telephone (where the hand receiver just was).
  • Make sure the AC Power is plugged into the wall, and then you can adjust the configuration settings.
To be able to hear or speak through the handset, either place the headset back into its charging cradle or press the call control button on the side of the headset. The talk indicator light on the base should go off and no sound will come through the headset.

Note: Make sure that the cables are connected correctly and the handset cable is connected to the base of the CS60 base.

Jun 16, 2008 | Plantronics CS60 Professional Headset

1 Answer

Keypad locked on telephone handset


Press the * key then the OK key within 3 seconds.

Dec 07, 2007 | Cable_and_wireless CWD4901 Cordless...

Not finding what you are looking for?
Cable_and_wireless CWD4901 Cordless Expansion Handset Logo

1,766 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cable_and_wireless Lands Phones Experts

Wayne Schmidt

Level 1 Expert

13 Answers

Robbie

Level 2 Expert

86 Answers

Tom Chichester

Level 3 Expert

28902 Answers

Are you a Cable_and_wireless Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...