Question about Projection Televisions

1 Answer

The picture got to tall - Projection Televisions

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Try changing the settings in the menu..Maybe to letterbox, etc. If that doesnt work, it could be an issue with either the vertical or horizontal amp on the board. In this case, I would recommend contacting a repair shop.

Hope that helps!

If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can.

P.S. - You can rate a solution with one of four ratings as explained under (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).

  • "FixYa!" - The solution provides great advice on how to solve the problem. (Positive Rating)
  • "Helpful" - The solution provides useful leads that helps solve the problem. (Positive Rating)
  • "Thanks for Trying" - The solution does not solve the problem but the effort is appreciated. (Negative Rating)
  • "Inappropriate" - The solution has absolutely nothing to do with the problem. (Negative Rating)

Thank you for using FIXYA!

IrishDruid

Posted on Jul 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get the dvd movies to fill the whole screen. The sides are empty and the picture is squeezed into the middle.


You need to change the aspect ratio from 4:3 to 16:9. This is usually done in the application that is used to view the DVD. Check the menu for video options. (Not the DVD movie menu, the application's menu).

Oct 22, 2015 | Projection Televisions

1 Answer

How do I adjust the picture size on my Mitsibishi tv. It is too wide and might be too tall. I cannot find aspect in the menu.


On your original TV remote look for button that says Picture size, Format or Ratio and press it till you see the normal size.

Sep 21, 2014 | Mitsubishi WD-73733 73" HDTV

1 Answer

Philips magnavox 6P6030 W101 picture is too big and can't see the outer edge of the full picture


Not easy with a older set----look to see if a physical control exists in the set for Vertical size (picture too tall) and the adjustment may only exist in a hidden on screen menu.

Jun 11, 2012 | Projection Televisions

1 Answer

The picture on the tv is magnified. What can we do to fix it?


PLEASE DEFINE MAGNIFIED. ARE colors off or picture too wide or too tall, these are different issues.

Confirm actual model number and brand so I may assist you.

SD TECH

Aug 19, 2010 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

How can i change the aspect ratio on RCA mm52110. the HD picture is stretched tall but very clear.


I'm going to take a stab at this out of the dark but okay!
1) is there an 'Aspect' or a 'picture size' button on your hand held remote control?
2) If you scroll through your 'On Screen Menu's' do you find a feature that will change the aspect or picture size?
Many of these TV's have this button feature on the remote control.
Blessings,
A/V Media Tech Guy

Dec 03, 2009 | RCA MM52110 52" Rear Projection HDTV-Ready...

1 Answer

I have an RCA D40W20 tv. I have the vcr/dvd connected to the video 1 jacks. picture will not format to screen. everyones heads are cut off. picture is too tall. any fix?


Ty using the zoom settings on the TV or the dvd player, also check the inputs by testing the tv with free to air or another input to determine if its the tv or the dvd player. Good Luck.

Nov 27, 2009 | RCA Scenium D40W20 40" Rear Projection...

2 Answers

Picture too tall


first to change format push the arrow button to the left or right. if you go into piicture in the menu then go to avance picture settings then turnoff or uncheck autoformat.

Jul 04, 2008 | RCA HD56W66 56" HDTV

1 Answer

Burnt item RCA P56830BL


Can you give me the PCboard location number of the component? It will be stamped on the PC board where the component is located.

May 24, 2008 | Projection Televisions

1 Answer

New Magnavox 19" LCD HDTV


need model number and you should also post under tv not projections.

Feb 01, 2008 | Projection Televisions

1 Answer

Picture looks like it is stretched too tall & wide


Probable regulator circuit damage = research at......................
www.HitachiServiceUSA.com ...............T.

Nov 09, 2007 | Hitachi 50UX26B/27K 50" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...