Question about Panasonic PT-53WX53 53" Rear Projection HDTV-Ready Television

1 Answer

Panasonic PT-53WX53 I had it for about 2 years and recently, it has a little problem with the image (just a blurred line in the bottom of the screen)

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

Just click below for convergence repair kit;

http://servicemanuals.vstore.ca/

The 3 blinks symptom is for busted convergence IC,you must replaced this IC in order that will works better again.STK 392-150ICs and it's associated resistor,this resistor automatically chagne value,can caused truoble even though you change the ICs.If you bring this to a service center they cost you $600 to $700,but if you buy the repair kit you can save more,don't wory it is very easy because there is intallation guide including in the repair kit. Feel free to ask whatever the result... click the link for sample picture guide step by step installation;

http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm Hope this may help you; Regards, VOTIT DON'T FORGET TO RATE;

Posted on Sep 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HEllo, I have about a six year old Panasonic projection HDTV television model # PT-52LCX65-K I recently placed the lamp. Now I have four green spots and two red spots on the screen. They are getting...


CALL PANASONIC THERE WERE SEVERAL MODELS FROM PANASONIC THAT HAD MANY PROBLEMS WITH EEPROM CORRUPTION THAT WOULD CAUSE THOSE KINDS OF SPOTS PANASONIC WILL MOST LIKELY PAY FOR THE REPAIR IF YOUR MODEL FALLS UNDER THE GUIDELINES.

Dec 16, 2010 | Panasonic PT-52LCX65 44" HDTV

2 Answers

Panasonic pt-47wx53g red is out of convergence range


Have you moved the TV recently?, if so the red can(Red source) in the back bottom of the TV may have physically shifted in its holder, this is common when a rear projection tv is moved, jostled. Take the back off, look at the three cans,Red, Blue, Green, see if they all look like they are nested the same, bet the red is shifted a little.Good Luck with it!
kskip69

Aug 22, 2009 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Panasonic PT-AE900U projecting black vertical lines on image


Hate to tell you this, but the PC board in the projector is gone. Had the same problem with my 3 year old AE900. Sent it to panasonic and the engineer told me i needed a new board. The PC board along with a new dynamic iris (which i already knew i neeeded) was going to cost £672 (inc labour). It wasn't worth fixing as you can buy a new 200 for about the same price.

If you still have your warranty - then your sorted. Have to say the Panasonic engineers who are based in Cardiff were very helpful when diagnosing and explaining the faults.

Dec 02, 2008 | Projection Televisions

1 Answer

Panasonic PT-61LCX65 61 -- Neon Yellow Lines


I called Panasonic and they are sending a repairman. My TV is 3 years old. They said they'd cover the repair as a one-time in-warranty even though it is out of warranty because they've been having problems with this model. Don't do like me and try to live with the problem.

Good luck to all that have this problem.

Sep 14, 2008 | Panasonic PT-61LCX65 61" Rear Projection...

1 Answer

Blue line trouble


Hi Kracka,

Are you able to post a picture of the problem?

It sounds from your description that it might be a 'convergence' problem which is when the red, green and blue parts of the image aren't alligned properly.

Check in your menu to see if there is a convergence setting.

Hope this helps

Andy

Jun 26, 2008 | Panasonic PT-51G41 51 in. Rear Projection...

1 Answer

Blurred image on panasonic tc21p50r


http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Dec 09, 2007 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Image went out and now i see small blur in the middle


does the blur goes across set? Or is it round in the middle?

Oct 07, 2007 | Panasonic PT-53TW53 53" Rear Projection...

Not finding what you are looking for?
Panasonic PT-53WX53 53" Rear Projection HDTV-Ready Television Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...