Question about D-Link RangeBooster G WBR-2310 Wireless Router (WBR2310)

2 Answers

I cannot get in to 192.168.0.1

Hi there, I tried every way and cannot get in to the webpage to enable WPA-PSK security on my WBR series router. Please help. Thank you

Posted by on

  • freecosoinic Jul 22, 2008

    I cannot get in to 192.168.0.1 problem,

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 99 Answers

The default username is "admin" and the password should be left blank i think...
try this website
http://support.dlink.com/emulators/wbr2310/

Posted on Jul 27, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 550 Answers

Http://192.168.0.1 is the default setting
if there is no response at all, the setting has been changed, the available addresses are in the range 192.168.*.* hunt for it, it is a security function, but sucks when nobody remembers what it was changed to.
If there is a password screen, enter the password.
If niether can be remembered, the router can be returned to 'out of the box' by the reset hole on the port side. then all the settings re-entered

Posted on Jul 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can I find or reset the security key on my D-link WBR-2310 wireless router?


Hi,

In order to find the wireless security password of your Dlink wireless router G WBR-2310 , please follow these setps

1. Open up the internet explorer in the computer in which you are online and clear the address bar and type in the number 192.168.0.1 and hit enter.

2. You will be logged into the D-Link router setup page .

3. Under the SETUP tab, in the left hand side, click on WIRELESS SETTINGS? you will find Wireless security Mode under which you can find the password for the wireless settings.

Good Luck!

Thanks in Advance!

With Regards,

Prema.

Jan 11, 2011 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Hi i have installed my router over a year ago now but am wondering how i set up security as others in my area can pick up my network easily without any passwords and it is slowing my computer down thanks.


In general, you can follow the basic steps below.

I would recomend using WPA2 or WPA secutity over WEP. (as this is a stronger type of wireless security)

- Open a web browser on the computer.
- In the address bar of the web browser, type http://192.168.2.1 (default router ip address, you may have changed this)
- Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit. (if you have already set up a password to login to the router then enter it here)
- Click on Security in the left-hand column under the Wireless heading.
- Use the drop-down menu and select "WPA/WPA2-Personal (PSK)".
- Select either WPA-PSK, WPA2-PSK, or WPA-PSK+WPA-PSK2 as your Authentication; doing this will set the Encryption Technique automatically.
- Enter a word or group of characters in the password (PSK) box. The Pre-Shared Key must be 8 to 63 characters in length. Note: The PSK (Pre-Shared Key) is case-sensitive ("A" is different than "a").
*NOTE* Unchecking the Obscure PSK box will allow you to see the security key that has been typed.
= Click the "Apply Changes" button to save the settings.

Any/all wireless computers that connect to this network will be required to have this Pre-Shared Key (password).

If you need assistance with how to re-configure your computers, then please provide the version of windows that you are using.

Basic steps are:

-Disable the current Wireless Connection
-Enable the Wireless Connection
-Search for available wireless networks (look for your SSID wireless network name)
-you will be prompted to enter in your PSK and then save your settings

Jan 03, 2011 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

How to secure my wireless router


Step 1: Open a web browser and type the IP address of the WBR series router into the address bar (default is http://192.168.0.1).

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.

Step 3: Click on the Setup tab at the top and then click on Wireless Settings on the left-hand side.

wpapsk01.jpg

Step 4: Select the type of WPA encryption you would like to use with your wireless adapter from the Security Mode drop down menu. For WPA-PSK select Enable WPA- Personal Wireless Security (enhanced).

Note: All wireless products on the wireless network must have the same level of security to connect to the network.

Step 5: In the WPA Personal section, configure the following:

  • Select the Cipher Type
  • Select the PSK or EAP
  • Enter your Passphrase
  • Re-Enter your Passphrase
Step 6: Click the Save Settings button to save your settings.

If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 20, 2010 | D-Link Computers & Internet

1 Answer

Hi just iwant to put security # or password on my d- link router so imean nobody can can get acsses to the internet. thanks


WPA is a strong form of wireless encryption, however not all wireless adapters support this feature. If your wireless adapter does not support WPA you will want to use WEP to secure your wireless network.

You can find information on configuring your WBR router for WEP here

Step 1: Open a web browser and type the IP address of the WBR series router into the address bar (default is http://192.168.0.1).

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.

Step 3: Click on the Setup tab at the top and then click on Wireless Settings on the left-hand side.

wpapsk01.jpg

Step 4: Select the type of WPA encryption you would like to use with your wireless adapter from the Security Mode drop down menu. For WPA-PSK select Enable WPA- Personal Wireless Security (enhanced).

Note: All wireless products on the wireless network must have the same level of security to connect to the network.

Step 5: In the WPA Personal section, configure the following:

  • Select the Cipher Type
  • Select the PSK or EAP
  • Enter your Passphrase
  • Re-Enter your Passphrase
Step 6: Click the Save Settings button to save your settings.

If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 19, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

How do I set up secured network


Step 1: Open a web browser and type the IP address of the WBR series router into the address bar (default is http://192.168.0.1).

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.

Step 3: Click on the Setup tab at the top and then click on Wireless Settings on the left-hand side.

wpapsk01.jpg

Step 4: Select the type of WPA encryption you would like to use with your wireless adapter from the Security Mode drop down menu. For WPA-PSK select Enable WPA- Personal Wireless Security (enhanced).

Note: All wireless products on the wireless network must have the same level of security to connect to the network.

Step 5: In the WPA Personal section, configure the following:

  • Select the Cipher Type
  • Select the PSK or EAP
  • Enter your Passphrase
  • Re-Enter your Passphrase
Step 6: Click the Save Settings button to save your settings.

If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 18, 2010 | D-Link DIR-615 Wireless Router

1 Answer

Unable to connect to my secure wireless router


You need to log into the wireless router either by a computer that successfully connects wirelessly or by physically connecting with an ethernet cable. Once connected, log into the router by open a web browser (Internet Explorer, Mozilla Firefox, Google Chrome, Apple Safari), and typing the router's address (usually 192.168.1.1 or 192.168.0.1) into the Address (or URL) line. The default usernameand password is usually "admin" & "admin" or "admin" & "password". Once successfully logged in, look for a tab or link that says "Wireless" or "Security". You'll be able to change whether security is enabled or disabled, and the password associated with it. Your security options are WEP or WPA (or WPA-PSK). WPA-PSK is the most secure, but WEP is also an acceptable choice. Select the security option of your choice and either enter text into the passphrase generator or choose your own password and type it into one of the security key text fields. If you use a password that is not a plain english combination of letters and numbers, be sure to write it down so that you can enter it as needed on other wireless devices that need to access your router (ie-pda phones, game consoles, laptops, desktops, etc). Be sure to save changes so that the security settings and password is saved.
Let me know how you make out.

Jul 13, 2010 | CP International WBR-3406TX Wireless...

1 Answer

I am trying to configure my wireless router for wpa-personal wireless security


It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. Before you start make sure your computer is directly connected to your router.

1- open a browser and on the address box type the following and press enter ---> http://192.168.0.1
2- on the next screen you will be asked for your routers username and password in order to login. If you have'nt change this information before you can use the following (click log in after)
Username : admin
Password: password
3- once you are in, on the left side menu click on
WIRELESS SETTINGS
4- on the next screen you will see below
WIRELESS SECURITY MODE:
Security Mode:-___________________
Next to Security Mode, select Enable WPA-Personal Security
5- a new menu appears below and asks for the following:
Next to Cipher Mode select--->Auto.
Next to Personal/Enterprise select---> Personal.
Next to Passphrase, enter a key (passphrase). The key is an
alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients.
Enter the passphrase again next to Confirmed Passphrase.
6- Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK (or WPA2-PSK) on your adapter and enter the same passphrase as you did on the router.


If you have further questions please do not hesitate to ask me...Good Luck!!!

Oct 23, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

HELP!!!!!! Trying to enable wpa-psk security on my laptop?


You should set the security on your computer wifi card to wpa-psk and then type in the securitycode which is written in your Zyxel Router.
If this is not possible with your networkcard, change to wpa or wpa2 inside the Zyxel. And do the same procedure with your networkcard, when detected the Router.

May 04, 2009 | Zyxel P660HW-D1 Router

1 Answer

How do i secire my dlink wbr 1310 router



WPA-PSK
print.gif Step 1 Open a web browser and type the IP address of the WBR series router into the address bar (default is http://192.168.0.1).

Step 2 The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.

Step 3 Click on the Setup tab at the top and then click on Wireless Settings on the lefthand side.

Step 4 Select the type of WPA encryption you would like to use with your wireless adapters from the Security Mode dropdown menu. Note: Your wireless adapters must support the form of WPA encryption you select.

Step 5 In the WPA Personal section, configure the following:

Select the Cipher Type
Select the PSK or EAP
Enter your Passphrase
Re-Enter your Passphrase

Step 6 Click the Save Settings button to save your settings.

You should also reset the admin password when you are done to something besides the default.

Click here to see how:

http://support.dlink.com/faq/view.asp?prod_id=2700&orig=1

Don't forget to rate this solution!

Feb 03, 2009 | D-Link 802.11g Wireless Router WBR-1310...

Not finding what you are looking for?
D-Link RangeBooster G  WBR-2310 Wireless Router (WBR2310) Logo

Related Topics:

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18358 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...