Question about Kenmore Oasis HE 27082 Top Load Washer

2 Answers

Machine went dead with clothes and water in it

Can someone please help me unlock the lid to this Kenmore Elite Oasis HE, model 110.2706. It is full of water and clothes!!

Posted by on

  • 2 more comments 
  • eppiemg Jul 07, 2008

    ok, so we figured out that the clips had to come off to remove the top so I am glad to see this post to know that this was the only solution. What a pain this was and also to deal with all the clothes and get the water out. Sears is on my **** list now, the rudeness of the service department and the concept of having to wait for 2 1/2 weeks to get an appt when all I wanted to know was how to unlock the lid in the interim and being yelled at by their associates. I will be calling the main office of Sears on Monday - their service has gone disgustingly down the tubes! Thanks for answering my plea for help...very helpful indeed!

  • mommaworley2 Jul 28, 2008

    this stupid washer (top loader) just quit...nothing. we've plugged it in and out, and checked our outlet, (it's fine)

    There are clothes in it, with water, and nothing is reading on the panel. NOTHING.

    I can't believe we've had this washer for a little over a year, and paid this much!

  • bakpakgirl Sep 10, 2008

    Our top load just quit. Nothing. Socket is fine. Blankets in there, they are wet, and we are working on getting them out. Had the thing for about 18 months. UGH.

  • eppiemg Sep 15, 2008

    the only way to get the machine open is as the guru suggests - take the clips off which are really hard to do and you can lift the top off (save the clips and screws in a plastic bag - you can't really put it back on). the problem is that you will have water in the machine still and it will stink disgustingly if you have to wait 8 weeks for Sears to service it like we did. But actually the mold was building and it was making us sick - after much screaming/yelling/arguing and legal consideration we got a new machine - not the same one because that one is discontinued...of course!!..but the new one was almost identical - we went to the store to check it out with a salesperson first to be sure. Sears needs to really look into their service, moral and ethics - they actually ordered a different part than the tech suggested because I believe they didn't want to pay for it. Very inconvenient and the allergy to the mold took time to get over - I will never, ever buy any appliance with a service agreement from Sears again.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

With the F 83 lidlock error comes the F 51 rps sensor error, whirlpool has put more sampling on there new board to decrease the error. I have noticed at the solenoid end that at the opening soap and dirt builds up causing some issues too but a new board has come out that has done ok,... so far. Part # W10201186 is the ccu.

Posted on Sep 12, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,028 Answers

With putty knife press in along front edge between top and front about 2-3 ins from outer edges on release clips top will lift up suspect bad lock assembly

Posted on Jul 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Kenmore Elite Oasis HE model number: 110.27072603 washing machine shows LID error code. It wont work at all.... went half way through cycle... help.


Greetings,
this washer has a lid switch problem...or possible main board failure, but lid does concentrate on the lid safety switch. If you remember when you open the lid it stops..well, its a safety feature and prevents tub from spinning with lid open...this one is more difficult to service if your not use to working on washers...try unplugging machine and leaving off for awhile...does the door lock? check switch for lid fault

Nov 25, 2010 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Du error code on a kenmore elite oasis he what does it mean and what can i di to fix the problem


Door unlock failure
Excessive force on door lid is preventing lock bolt from
retracting.
Wash media buildup is preventing lock bolt from retracting.
Machine/motor control cannot determine if door lid is in an
unlocked state. See TEST #8, page 14

Jun 11, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

Kenmore Elite Oasis 2709 water level problem


For low water volume - or "Trickling" effect...

1. Turn off the water supply to both hoses.
2. Remove hoses (one at a time so you don't get them confused)
3. On the washer side - look for a removeable screen inside wher you just removed the hose.
4. Using a small screwdriver - pop out the screen and reverse-flush it/clean it. It will likely be full of sediment and calcium deposits from your pipes.
5. Replace the inlet screens.
6. Re-fit the hose to the machine.
7. Turn on water supply valves.
8. re-try.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 09, 2010 | Kenmore 4292x Front Load Washer

1 Answer

Hello, Kenmore Elite washer, doesn't drain properly.Leaves clothes full of water. We use the spin cycle quite a few times to get out as much water as possible. Where is the drain filter please tell me....


Hello. The drain filter, or strainer, is usually located at the bottom front of the machine, behind the kick panel. This is the small panel below the main front panel. Remove it and you'll see a hose coming from the drum to a canister. This is the strainer, and has a screw lid. Caution when opening this....There will be water. Be prepared.... Unscrew the lid, and remove the strainer and clean. If it is difficult to remove, try gripping the tab in the middle of the lid with pliers or channel locks to get some leverage. I always put a little silicone spray on the "O" ring and threads when I reassemble the strainer. This should solve your problem.
Best regards --W/D-- please feel free to rate this solution! Thanx!

Jul 30, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

My Sears 500 washing machine stops in middle of wash cycle.


timer problem or maybe the lid switch is going bad. Im curious if the motor is getting hot and shutting down... go to whirlpoolpartssurplus.com call .. ask for mark

Jun 24, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Says lid and won't work


Check the lid switch... sometimes if something heavy or someone sits on the lid, it can tweak it just enough so the lid switch loses contact and will keep the machine from turning on. You can sometimes bend the lid back. Check the lid switch by sticking a credit card between the lid and the switch with the lid closed... does that solve it? let me know.. KEN

May 08, 2009 | Kenmore 4.5 cu. ft. Oasis Canyon Top Load...

Not finding what you are looking for?
Kenmore Oasis HE 27082 Top Load Washer Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...