Nothing on the screen when psp is switched on
Turn the PSP off and remove the battery and battery cover. Remove the
two screws underneath the battery. Remove the other two screws on the
opposite side of the battery. Remove the final screw on the bottom edge
of the PSP.Grasp the PSP on both sides with each hand and pull the
cover off of the PSP. Locate the button bar on the bottom front of the
PSP. Use your flathead driver to lift up the left side of the button
bar until it pops up off the LCD support. Lift the button bar cable tab
upwards to remove the cable and remove the button bar.Insert your flat
driver into the small space on the left side of the LCD screen between
the the LCD housing and the LCD mounting bracket. Twist the screwdriver
slightly and the mounting tabs will pop out. Gently remove the other
side of the LCD after popping out the first side tabs. Bend the PSP
screen all the way down until you can see the backside of the screen.
up the flex cable connectors and unhook the cables that connect the
screen to the PSP motherboard. The tabs are brownish in color; they are
very fragile, so be gentle. Lift the PSP screen out of the housing and
place to the side.Place your new PSP screen into the PSP, face down
like you had the older screen after popping out the mounting tabs.
Connect all of the cables from the PSP screen into the motherboard
tabs. Fold the screen back into the bracket, snapping it into place.
Place the button bar back onto the LCD support, connecting the last
cable. Place the cover back onto the PSP and tighten screws to finish.
Apr 02, 2010 |
Sony PlayStation Portable (PSP) Console