Question about Onkyo Audio Players & Recorders

1 Answer

TA 2090 playbutton just flashes when powered up. Lights up but will not do anything else

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Onkyo TA-2090 which will not play , the light on the play button keeps flashing, do you know what could be wrong?

Posted on Mar 11, 2013

3 Suggested Answers

  • 3422 Answers

SOURCE: I have an Onkyo TA

HI,

Please CLICK HERE to download the service manual.The reset button will be mentioned in the service manual.

Posted on Jul 04, 2008

tech48
  • 624 Answers

SOURCE: I have an Onkyo TA

Cassette decks do not have a reset button, the only way to do any type of a reset would be to let it sit unplugged overnight. I don't think this would help anything. The microprocessor in it is not the type that would require a reset but it won't hurt anything to try.

Since this is an older model (but very good one), it is very possible it may have some bad solder connections. It was intermittant at one point, having this problem but then playing. That is a sign of bad solder, but it is no guarantee. As solder get old and has a lot of wear from the unit being played it can degrade very slowly, causing an intermittant failure that eventually is constant. If you are good with a soldering iron you could try reflowing any solder connections that are not shiny and silver or have rings. The problem could be much deeper than that, but without having it in front of me to trouble shoot, it is really just a guessing game right now. There may be several different things that can cause it to do what you described. All of those things would require some good electronic troubleshooting skills to isolate.

Since this is a quality piece of equipment, it would be worth getting fixed. It would be difficult finding one this good at the price you would pay for a repair.

If I can be of any further help just let me know.

Dave

Posted on Jul 04, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is a tp button on a jvc kd528


TP (Traffic Programme) button
Setting and operating TA (Traffic Announcement) standby mode

When the TP button is pressed briefly in the FM mode, the "TP" indicator is lit during reception of a TP station and the TA standby mode is engaged. TP

Note:
RDS
When the station being received is not a TP station, the TP indicator flashes. Press
the ¢
in the display, and TP station search starts. When a TP station is tuned in, "TP" is lit.

• If you're listening to a DVD/AUX and wish to hear a TA broadcast,
press the TP button to enter the TA standby mode.
(The "TP" indicator lights up.)

Cheers

Nov 20, 2016 | Computers & Internet

1 Answer

Where can I get a schematic diagram for my Onkyo cassette deck model TA 2090?


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Sep 02, 2014 | Audio Players & Recorders

1 Answer

1999 Durango left blinker blinks really fast right blinker normal all bulbs are good and operate what's the problem


Do you have ta railer wiring harness? This could be causing the problem. Turn on all your lights and perform a walk around the vehicle to see if there is anything unusual going on with any of the lights. A light will dim when the turn signals are flashing if the wires are bad.

May 24, 2014 | Cars & Trucks

1 Answer

Sansui sv2918 keeps blowing k2996 mosfet. Power led flashes and ta-ta-ta sound is heard


Check the Flyback Transformer

and associated circuits.

If 2SK2996 is blown, it may take out the PWM IC and some components

that goes with it.




Let me know what you find or needs further assistance.

Sep 17, 2012 | SansuiM1315 TV

2 Answers

All lights blinking and 5 time beep sound.


Please check the carriage mortor ic FUSE,And SLA7024

Jun 29, 2012 | Epson LQ-2090 Matrix Printer

1 Answer

Ricoh 2090 SC542 error


model 2090 richo sc 542 thermistar and hetar mail cancektar parobelam

Aug 22, 2009 | Office Equipment & Supplies

1 Answer

I have an Onkyo TA 2090 that has the play button continuously flashing on and off. Usually the play button flashes for just a second and then becomes operational. Now when it powers up the play button...


Cassette decks do not have a reset button, the only way to do any type of a reset would be to let it sit unplugged overnight. I don't think this would help anything. The microprocessor in it is not the type that would require a reset but it won't hurt anything to try.

Since this is an older model (but very good one), it is very possible it may have some bad solder connections. It was intermittant at one point, having this problem but then playing. That is a sign of bad solder, but it is no guarantee. As solder get old and has a lot of wear from the unit being played it can degrade very slowly, causing an intermittant failure that eventually is constant. If you are good with a soldering iron you could try reflowing any solder connections that are not shiny and silver or have rings. The problem could be much deeper than that, but without having it in front of me to trouble shoot, it is really just a guessing game right now. There may be several different things that can cause it to do what you described. All of those things would require some good electronic troubleshooting skills to isolate.

Since this is a quality piece of equipment, it would be worth getting fixed. It would be difficult finding one this good at the price you would pay for a repair.

If I can be of any further help just let me know.

Dave

Jul 04, 2008 | Onkyo Audio Players & Recorders

2 Answers

Umax powerlook 3000


The UMAX web site appears to have a fairly good knowledge base, especially when it comes to troubleshooting blinking lights. http://umax.com/support/knowledge/index.jsp Doing a search for lights under Support info result a few articles, including this one: http://umax.com/support/knowledge/search.jsp?docs=SC00322

Sep 14, 2006 | Umax PowerLook 3000 Pro Flatbed Scanner

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Dennis McCollum

Level 2 Expert

137 Answers

 Grubhead
Grubhead

Level 3 Expert

4853 Answers

The Knight
The Knight

Level 3 Expert

72640 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...