Question about Mitsubishi WD52527 52" Projection HDTV

Open Question

My mitsubishi wd-52527 have timer light blinking and won't come on

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Slinteriors
  • 8617 Answers

SOURCE: i have a mitsubishi wd-62725.

Sounds like the classic bad capacitor problem on the DM pwb. You can get the V26 DM pwb repair kit at the following link which will usually repair the issue. Kit contains replacement capacitors and CD with chassis dissasembly and explains which capacitors need replacement.
http://servicemanuals.vstore.ca/

Posted on Nov 28, 2008

Ad
  • 19 Answers

SOURCE: blinking green timer light on mitsubishi wd 52525

disconnect the connector for the front switch control board. Try turning it on with the remote. If it works replace that board, also look for bad caps on the small signal board. they're 1000Mf 16v

Posted on Mar 22, 2009

Slinteriors
  • 8617 Answers

SOURCE: mitsubishi wd-62725 rear proj green timer light will not reset

you need the V26 DLP DM repair kit at the following link. The kit contains the replacement capacitors and the cd with instructions.
http://www.tvrepairworld.com/

Posted on Jul 20, 2009

  • 1 Answer

SOURCE: Mitsubishi Model WD-52725 timer green light blinking fast

My Mitsubishi WD52725 will not turn on...the timer light is blinking. We pushed the reset button, unplugged tv. Just got off the phone with Mitsubishi customer "service." After answering numerous personal questions, and being on hold for several minutes, I was told that the only solution was to push the reset button. Duh! We'd done that several times with no change, which is why I called them! BIG WASTE OF TIME!!!!

Posted on Jun 19, 2010

Slinteriors
  • 8617 Answers

SOURCE: my mitsubishi wd-62528 has a constant rapid green

Thats a common problem most likley caused by failed capacitors on the DM and the power board. You can get the V26 Chassis DM / Power repair kit from www.tvrepairworld.com which contains the capacitors and the CD with instructions for the repair.

Posted on Jul 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The timer light is continuosly blinking when i plugging in the tv (mitshubishi wd-5252) and won't reset?


Thats one of the famous capacitor issue most likely. Thats the V26 Chassis DLP and usually that symptom is caused by failed DM and Power Board capacitors. There is a repair kit that will work in alot of cases with that symptom. Its called The V26 Chassis DM / Power repair kit available at the following link with detailed instructions http://tvrepairworld.com/mitsubishi_repair_kits

Apr 03, 2013 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Replaced lamp but lamp light still blinks orange


I have a wd-57731 The lamp light blinked orange. i replaced the lamp turned the tv on and the timer blinks green for one minute and then the lamp light blinks orange again. It won't turn on. Can you suggest anything?

Nov 22, 2011 | Mitsubishi WD-57731 57" Projection HDTV

2 Answers

My Mitsubishi WD-52527 has a constant blinking green light. There is no video and no audio just a blinking green light when it is pluged in


I had a similar problem with my 42 in Philips LCD HDTV. Here was the problem. My Power Supply Board had several bad capacitors. I opened my TV (warranty was expired ofcourse) and found four bulged capacitors. Many electronics companies were sold capacitors that failed in 2-5 yearsinstead of 10-20. The capacitors failprematurely due to a lack of preservatives. Unfortunately, they were installed in allsorts of devices. Here are some options for you.
1. Have it fixed by a professional 2. Open your TV and find PSB. Checkfor faulty caps. If you find some (bulgedor leaking) bad caps replace the entire board. 3. Remove and then replace individual faulty caps. This takes some soldering skill. Caps are inexpensive and if you can take care of it yourselfit will save you hundreds. I have a tip/tutorialon this site that may also help. Itgives step by step instructions for replacing caps on PSB #715t2432-2. If this is your board you are in luck. It'scalled: Fixing the Philips Turns/shuts off on its own problem. Hope this helps and Good luck.Kaufman605

Dec 11, 2010 | Mitsubishi WD52527 52" Projection HDTV

1 Answer

I have a mitsubishi WD-52527 TV with error code 45


You have to pull the light engine to get to the pbs fan it is the one located closest to the lense on the light engine. you should be able to see if the fan is turning without removing the engine.

Sep 06, 2009 | Televison & Video

1 Answer

Lamp light is red


pull lamp from unit and investigate it for integrity

Jul 07, 2009 | Mitsubishi WD52527 52" Projection HDTV

Not finding what you are looking for?
Mitsubishi WD52527 52" Projection HDTV Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76125 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...