Question about JVC Projection Televisions

1 Answer

My JVC I Art tv is not putting any sound out at all. not through my surround sound or the tv period. i know the tv is still in good shape.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • JVC Master
  • 8,617 Answers

Need the model number in order to help. Please respond to this same post with your model number.

Posted on Jul 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AV-65WP84 when i connect video or the antenna the screen start to blink green does anyone knows about this problem on this jvc i-art tv?


Have someone open it from the front (front grill below screen is secured on either side at back with screws) and remove inspection plate behind grill--someone needs to locate the small black block with 6 adjustments and locate the green SCREEN not the green FOCUS and turn the green slightly down.

Care needs to be taken as set must be on--do not touch anything else inside as dangerous voltages are present when set is on.

Mar 16, 2012 | JVC Projection Televisions

2 Answers

I have audio cables going from HD 61g887 jvc tv, to my phillips surround sound system under aux but it is not giving me sound?


hi
you didn't mentioned the model number of your surround sound system, for a better solution its important. any why try the following.

if you are connected the analog audio output of your tv to the system using RCA cable, then go to the setup of the surround sound system and change the input assignment setting from digital to analog.
If your connected the digital output of your tv to the digital input of your surround system using optical cable then, goto the setup of your surround system and change the input assignment to digital (optical) input.


if u need any further assistance fell free to contact through fixya

Jan 20, 2011 | JVC HD-61G787 61" Television

2 Answers

Have a jvc i-art pro 56" from 2003 have a red halo surrounding images. what can I do to fix this and where do I acquire the parts? Thanks


Thats aconvergence failure. You can get the AV48WP74 convergence repair kit from www.tvrepairworld.com the kit contains the parts and the CD with detailed instructions for the repair.

Jul 10, 2010 | JVC AV-56WP74 56" Rear Projection...

1 Answer

How to connect surround sound speaker to it


Hello. Usually the tv sound is run through a stereo amplifier and then into the surround sound speakers.

Apr 02, 2010 | JVC AV-56P575 56" Rear Projection...

1 Answer

Jvc i art av 36f475: no sound


Good Day sir/maam, my guess are several, lets start at the common ones, make sure that the AV cables are good. you can try swapping cables to make sure. If possible try the cables on other units such as any DVD player. There is a possibility that the sound jack, is bad, try to vibrate the plugged cable, and see if the sound goes back if it does, you need to solder the terminals. Worse is the Amplifier section of the TV. does the TV sound normal on broadcast? check the volume, mute. or the TV setup. hope this helps. if you have additional info please feel free to ask again, let me know any progress. thanks

Jul 28, 2009 | JVC AV-65WP55 65" Rear Projection...

1 Answer

Jvc i art pro doe not turn on


The clicking sound is the TV trying to restart itself. It generally attempts this several times before giving up. The blinking code indicates the type of error (error codes are documented in the manual for the TV). The most likely cause is a burned out bulb, but could be something else.
If it is a bulb, it is usually replaceable without a service technician, and at a cost far less than $450.
Good luck.

Jun 18, 2009 | JVC AV-56WP74 56" Rear Projection...

1 Answer

I have a jvc TH-S51 and i cant seem to get the surround sound to work with the tv can anyone help?


Connect the surround to the TV, using RCA cables and following the manual instructions.

Once connected go to settings menu on the TV and chose audio settings.
Set the audio settings to the one needed from your surround.


Sep 07, 2008 | Projection Televisions

1 Answer

Tv turns off by it self


Ours 60" (60P8342) turns off after a short period of time also. My husband researched it online. The cheap solution he was told to try is to unplug the TV (or plug into power strip and switch off) when you are done watching it. A computer board inside over heats and it's a protection mechanism for it to turn off. Otherwise, it's over $100 to fix the computer board.

May 29, 2008 | Philips 60P8342 60" Rear Projection...

2 Answers

I art JVC 46 inche double vision


If you do not have hand soldering skills or know how to use a multimeter, I would suggest to replace the whole assembly.
If you know how to solder you can just replace 2 ICs that are mounted on the big black heatsinks and possibly 1 or more resistors.
Click here to find the entire assembly for your TV.
Good Luck.

May 24, 2008 | JVC AV-56WP74 56" Rear Projection...

1 Answer

JVC I ART


Funny sounds tend to lead to a short of one or more componets most likely the HOT and FBT I also would not rule out the convergance IC's. this repair should be left to the repair gods.

Jan 01, 2008 | JVC AV-48WP30 48" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Projection Televisions Experts

easy alberta
easy alberta

Level 2 Expert

132 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68223 Answers

Are you a JVC Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...