I'm sorry that the built in flash on the Camera is not working. If the Forced flash setting is already enabled and the flash is still not working, then the issue may be due to another camera setting. Even if the Forced flash setting is enabled, the flash will still not work in the following circumstances:
- When shooting MPEG movies
- When shooting in the Twilight or Handheld Twilight mode
- If shooting with the Burst or Multi Burst mode
- Shooting with Sweep Panorama
- Shooting with the Fireworks or High Sensitivity mode.
- If an external flash is connected.
Please make sure that the Camera is not set to any of these modes. You can check the Handbook to get the information to change the setting..
Click hear to download the Handbook if you don't have one handy.
If the issue persists, please Initialize the Camera. To initialize the Camera, please use the
Initialize option under
Main Settings option on the Camera. Also make sure that the battery is fully charged.
If the issue persists after performing all the above mentioned troubleshooting steps, service is required. Click hear to locate your nearest service center.
Thanks for understanding. Please let me know if you require any clarifications.
Thanks for using Fixya...
×