Question about NetGear WGT624 Wireless Router
I have xbox 360 and need to know how to change my NAT settings from strict to open so I can play games with people.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Change NAT to open
The ports should be opened only in the router not in the x.box, go to a working pc..
To allow traffic from the internet to enter your local network, you will need to open up ports or the router will block the request.
Because our routers use NAT (Network Address Translation), you can only open a specific port or ports to one computer at a time. For example: If you have 2 web servers on your network, you cannot open port 80 to both computers. You will need to configure 1 of the web servers to use port 81. Now you can open port 80 to the first computer and then open port 81 to the other computer.
Step 1 Open your web browser and enter the IP address of your D-Link router (192.168.0.1). Enter username (admin) and your password (blank by default).
Step 2 Click on the Advanced tab at the top and then click Virtual Server on the left side.
Step 3 Check Enabled to activate entry.
Step 4 Enter a name for your virtual server entry.
Step 5 Next to Private IP, enter the IP address of the computer on your local network that you want to allow the incoming service to.
Step 6 Choose Protocol Type - either TCP, UDP, or both. If you are not sure, select both.
Step 7 Enter the port information next to Private Port and Public Port. The private and public ports are usually the same. The public port is the port seen from the WAN side, and the private port is the port being used by the application on the computer within your local network.
Step 8 Enter the Schedule information.
Step 9 Click Apply and then click Continue.
Posted on Nov 16, 2007
SOURCE: Change NAT to open
i have the same problem, ive looked at the thread its the same as myne but when i go on the virtual servers it doesnt say discription or imbound port it just says lan port publick port i dont understand :(
Posted on Feb 11, 2008
SOURCE: change NAT from strict to open
You need to do port forwarding on your router. First, you must setup a static IP address on your XBOX. Then You must open these ports on your router setup page using Port Forwarding feature. 80 TCP and UDP, 53 TCP and UDP, 3074 TCP and UDP.
Posted on Jun 02, 2009
Tips for a great answer:
Mar 27, 2011 | Belkin Office Equipment & Supplies
Mar 12, 2010 | Microsoft Xbox 360 Console
Mar 01, 2010 | Microsoft Xbox 360 Console
Dec 30, 2009 | Microsoft Xbox 360 Console
Dec 30, 2009 | Microsoft Xbox 360 Arcade
Jun 01, 2009 | Zyxel P660HW-D1 Router
Mar 13, 2009 | Dynex DX-E401 Router
Nov 09, 2008 | Computers & Internet
Mar 24, 2008 | Linksys WRT54GL Wireless-G 54Mbps...
Feb 26, 2018 | NetGear WGT624 Wireless Router
652 people viewed this question
Usually answered in minutes!