Question about Sharp Projection Televisions

Open Question

Sharp LC13E1U power adapter UAPD-A009WJPZ used parts

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv won't turn on. lamp looks ok. i'm thinking it's the ballast. where can i order this for a sharp dlp650? thanks!


Hi


Thanks for using FixYa. You can order the parts for your Sharp 56dr650 from this link. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 23, 2010 | Sharp 56DR650 56" Rear Projection HDTV

1 Answer

View timer blinking and TV will not turn on


Hi

Thanks for using FixYa. The power supply of your sharp TV might have failed. It could be due to swollen/bulged capacitors on the power board. It can also be due to the Flyback transformer, which generates the high voltages(part of high voltage circuit). If you have disassembled the TV before then you can check for the swollen cap.s and also for any loose connector cables from power board to other boards.

Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks Rylee

Oct 07, 2009 | Sharp 55R-WP4H 55" Rear Projection...

1 Answer

My tv will not power up. The light comes on and then goes off.


What is Wrong with TV? Have you replaced Lamp? If so and still no picture then it can be Ballast Board it connects to Lamp Box , Ballast is what turns Lamp on Call Encompass 1-800-638-3328 or Mats 1-800-628-1118 and you can also look up Parts on E-Bay!

Sep 29, 2009 | Sharp 65DR650 65" Rear Projection...

1 Answer

Have an Aquos Sharp 32" 1080p LCD TV and the power went out in the house. Now the TV will not turn on, when I try the power indicator light blinks green repeatedly. Read the manual no help there....


This sounds like a problem that only a repair person can specifically point out.  It could be anything from a fuse to the "engine".
Try to find a local "authorized" repair person to give you a free quote with no responsibility on your part to get it fixed as TV repairs can cost 50% of what a new one would or what a working used one would.
Also, I'd recommend to NOT overload your electrical outlets and to not use without a surge protector (a real one).  If there is a storm or it's very windy,  try keeping not only your monitor for your PC off, but also your TV (unless you need it for emergency reasons).  Also, try getting a used battery powered cheap small tv with a digital converter box if you need to monitor the tv during an emergency.  Also, get renters of home insurance to cover the costs of weather related damage.
Last thing... be sure that any "extended warranties" offered by your local electronics store will cover the cost of any weather related power outages.  If so, it may be something to look into purchasing, although I generally advise to not buy into "extended store warranties".
OK, one last last thing... check the warranty with the manufactuer (SHARP)... If it's under warranty, tell them it's not working and you don't know why, so you need a replacement.
Good Luck! thomseye

Dec 13, 2008 | Sharp Projection Televisions

1 Answer

Anyone looking for a 56DR650 for parts?


Type in sharp & tv # on your log in screen & sharp should have that wheel. If not surplusparts.com should

Dec 04, 2008 | Sharp 56DR650 56" Rear Projection HDTV

1 Answer

Sharp aquos LC-20S5U will not power on. red light in front is on when power is turned on red light goes off and nothing happens.


The power board has failed and while possible to replace, is pretty expensive if the unit isn't under warranty. You can't get the part or schematics directly from Sharp unless your factory service. Tritronics might have it, but you'd have to check with them as to availability and price - and you'll pay retail. Secondly, I've seen malfunctioning supplies damage the control board. If you find the inverter supplies are damaged on the panel, go shopping.

Only thing I can offer in terms of repair is check the main filter caps on the secondaries of the inverter supply. If I remember correctly, they're 2200uF @ 25V and 1200uF @ 35V. They'd be "pregnant" or out of tolerance. You have to pull all of them and check with a meter to confirm.

DO NOT USE STANDARD CAPS. You MUST use caps rated for high heat (105 degrees C) and high ESR. They're designed to handle the frequency used for the supply and don't drift as the set plays. MCM offers these caps in their components section.

Good luck,
Mark

Nov 15, 2008 | Projection Televisions

1 Answer

Where do I buy Sharp Aquos parts. I am after power supply board. CA009WJN1 for Model LC-30HV4M Thanks


Good Day, coopsl;ine;
Try calling (630)-226-2699; SHARP, or go to NATIONAL PARTS CENTER: parts@sharpsec.com. Good luck, big IRISH.

Sep 09, 2008 | Sharp Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sharp Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...