Question about Furuno NavNet vx2 1920C GPS Receiver

1 Answer

Furuno Radar Model 1833C

My radar is upside dwon on the screen, I can't change change the soft key , North up, True Motion, head -up ( which it is on) but I am not ttraveling up on the screen, only down.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 132 Answers

You have two things that orient the radar, on is called heading (or bearing) alignment. This is where you aim your radar so that a target comes up at 12 o'clock when dead ahead. Access this mode by pressing and holding menu duing power on, and go in to Installation Mode, radar setup, next page, align heading. I have posted a "tip" on this, search for VX2 radar alignment.
After this is done, North up is accomplished by having a magnetic input (fluxgate compass or autopilot). Calibration of this compass varies, but if it is accurate, then all should line up nicely.

Posted on Jan 18, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Furuno radar 1715


Cek wiring to scanner, change reedswice sensor /heading sensor. If the problem not solve, change the display with the new one.

Oct 01, 2013 | Furuno 1715 LCD Radar System GPS Receiver

3 Answers

Ais and 1920c Furuno chart plotter


n the system setup, under “UNITS” I set BEARING to “MAG” (magnetic). This will cause the unit to display course / bearing information in relation to the Magnetic North and match magnetic compass readings. It is not the same as True North! One has to be careful with this setting. There are a number of areas where the earth's magnetic field is locally disturbed, sometimes very significantly. Your GPS may not account for it. - again, under “UNITS” I set “METRIC”.

Sep 02, 2008 | Furuno NavNet vx2 1920C GPS Receiver

1 Answer

Can't activate Installation page of Furuno Radar Model 1945


Press MENU key, select FACTORY in gray, press MENU 5 times while holding down CANCEL/HL OFF, press ENTER, select language, ENTER, select INSTALLATION.

Jun 11, 2013 | Furuno Boating

1 Answer

NMEA Output from Furuno 6" LCD Radar, Model 1623


No it does not output any type of radar video data.

Apr 27, 2010 | Furuno 1623 Radar 16nm Range

1 Answer

Hello there, I have a 4' radar antena with a


ahh, this is an old one check the book.(ha, ha)
Press and hold menu during start up Choose "Installation Mode" Press "Menu" Select "Radar Set Up" Press "Next Page" Select "Radar Heading Alignment" Use knob and follow prompts, you will place the dotted line at dead ahaed and the
Select "Set"
Also, remember to TUNE VIDEO

Oct 08, 2009 | Furuno Navnet 1964CBB/NT vx2 Radar C Map...

1 Answer

When I turn on the unit it will not read the depth only a blue screen and it will not let me switch out of auto mode or run the sounder test?


I know this is an old question but just ran across it. The 1833C/NT is a radar and chart plotter. It requires the external and optional black box sounder to have depth recorder functionality.

Oct 03, 2009 | Furuno 1833C/NT GPS Receiver

1 Answer

Radar install problem


the GP31 has an NMEA in/out in the power cord - out is yellow green in blue(or black) and white on the 1833 you will use data 4 typically which has an in and out also, same colors hook out to in and in to out, program and done

Mar 23, 2009 | Furuno 1833C/NT GPS Receiver

1 Answer

Radar Displays the image upside down


If this is on the radar screen, you'll have to set your heading alignment on your radar. The radar may be 180 degrees out. if this occurs on the plotter, then if you have a heading sensor attached or an autopilot, your heading may be off.

Feb 03, 2009 | Furuno NavNet vx2 GP1720C GPS Receiver

1 Answer

Classic Navionics chip in a Furuno 1833C


Gold Navionics is really not bad at all, but by todays standards, lousy. This is a VX1 unit and the classic cartography is frowned upon now, but in the day, this was quite good. So you have to ask, is it worth replacing for cartography alone? Radar and Sonar will plug and play to an 1834C, which is available with C Map or Navionics. Furuno 3D, on the other hand, uses the hyper cool Map Media 3D cartography with sat images and all that, plus other cartography too.

Aug 31, 2008 | Navionics CLASSIC MMC US835L SOUTH FLORIDA

Not finding what you are looking for?
Furuno NavNet  vx2 1920C GPS Receiver Logo

Related Topics:

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Furuno GPS Experts

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Cindy Wells

Level 3 Expert

4954 Answers

Steve
Steve

Level 3 Expert

691 Answers

Are you a Furuno GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...