Question about Brother HL-2030 Laser Printer
Paper light how i can solve. thanks for solutions
Hi here is a link to the brother site with a breakdown of the led status lights.
There are quite a few reasons as to why the paper light is coming on.
the obvious ones are a paper jam, low paper or no paper or its expecting paper to be put into the manual feed on the front of the printer.
but there are a few less than obvious reasons as well according to brothers site.
hope this helps.
Posted on Aug 28, 2009
Remove the Toner Drum unit and look for a little blue tab. Slide it
back and forth a couple of times to clean a corona wire and see if that
helps.If the problem still exists, you may try this 2nd option.
> the front door. There is something wrong with the front door, or the mechanisms that signal that it is closed. Closing the front door (the one that you open to pull out the toner and drum) all the way to where it snaps into place then the paper light flashes red. However closing the front door to the point where the "ready" light comes on (don't snap the door into place, just close it and let it rest in place without snapping it closed) and the printer prints fine, pulls paper from the tray and prints like it should.
So give it a try, don't snap the front door all the way closed to where it snaps closed, just close the door to where it's resting closed to where the ready light comes on and see if this helps you.
Posted on Nov 20, 2010
Tips for a great answer:
Aug 07, 2015 | Brother HL-2030 Laser Printer
Mar 09, 2010 | Brother HL-2030 Laser Printer
Feb 09, 2010 | Brother HL-2030 Laser Printer
May 25, 2009 | Brother HL-2030 Laser Printer
Apr 16, 2009 | Brother HL-2030 Laser Printer
Oct 24, 2008 | Brother HL-2030 Laser Printer
Aug 30, 2008 | Brother HL-2030 Laser Printer
Jun 14, 2008 | Brother HL-2030 Laser Printer
Jun 12, 2008 | Brother HL-2030 Laser Printer
609 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: