Question about Zebra Symbol Technologies MC909X-G Series Barcode Scanner

1 Answer

WLAN Autheticating Problems with WPA-PSK MC9090, but not MC3070

Hello, we are experiencing wlan problems with MC9090 scanners together with WPA-PSK encryption. We are also using MC3070, but with that we don't see any problems. The problem looks like followings, the scanner shows very often, that is can not see any WLAN signal. The Message is "Out of Range". We have more then enough AP. That shouldnt be the problem. As mentioned in the same situation the MC3070 scanner works without any problems. Does someone experienced similar problems?Thanks

Posted by on

  • Anonymous Oct 07, 2008

    Same issue. Old units were Symbol Palm 1846, WEP encryption. No delay between scans, no connection problems. MC9090G, TKIP, on VLAN. Frequent 'Network Out of Range' errors, does not connect in all areas as Palms did, and there is a delay between scans. Not sure if this is a problem with access point, the switch, or the gun itself. SD

  • rcorona328 Oct 17, 2008

    We have the same problem. We have 5 AP and 16 MC9090 and i have no communication between the Access points and the RF Guns. I keep getting Out Of Range message. i can ping all the access points but sometimes i can only connect to one AP. Please help. thank You.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

WPA encryption in MC9090 must be HEX format.

Posted on Nov 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an MC9090 with windows mobile 5.0. I was wondering if it is typical to have two symbol PHOTON WLAN drivers appear on the network card connections list


Dont worry about that. Anyhow the connection is handled through Fusion software and not windows settings. Icon on the today screen in the right down corner.

Aug 11, 2011 | Symbol MC9090 Barcode Scanner

1 Answer

Cannot connect to Motorloa MC9090-G to wirless network due to regulatory issues. All of my connection parameters are correct. Can someone help?


Hello,

please asure yourself, that in Options of the WLAN Fusion Client (icon in the right corner) is the Regulatory set for the correct country.

To be sure, just disable the 802.11d checkbox in Fusion - Options - Regulatory.

Nov 04, 2010 | Zebra Symbol Technologies MC909X-G Series...

1 Answer

My mc3070 motorola scanner won't connect to the internet, or scan any tickets.


MC3070 is equiped with 802.11b/g radio so the WLAN connection should, do you see any WLANs available in the Find WLans dialog?
The Find Wlans dialog can you open through an icon of the Fusion application in the right corner.
For scanning would you need an software, usually is a demo software preinstalled. You could find it in the Application Folder. The demo software is called ScanSample or ScanWedge.
You can also download an application called DataWedge from the support.symbol.com website

Sep 04, 2010 | Zebra Symbol Technologies MC909X-G Series...

2 Answers

MC9090-G wireles->find wlan scan error adapter unavailable


Have the same problem when a DataPhone application was installed bevore. After disabling the application the WLAN device is not working any more !
Do you already have a solution ?
ciao,
Peter

Aug 03, 2010 | Zebra Symbol Technologies MC909X-G Series...

1 Answer

MFC-7840W Printer: need tp set the wireless setting, lost the instruc...


To setup your Brother MFC-7840W on a wireless network do the following:

Press Menu.

Scroll down to #5 LAN and hit OK

In the LAN submenu, scroll down to 2. WLAN and hit OK.

In the WLAN submenu select 2. Setup Wizard.
(The printer will search for the SSID of your network. If you are presented with multiple networks, select yours and hit OK.)

Depending whether you have setup a network key on your wireless network, you will have to choose the type of connection. Your options will be Open System, Shared key, and WPA/WPA2-PSK.

If you have a Shared Key or WPA/WPA2-PSK network, then you willhave to enter the key to connect. Open Key does not use a key to connect.

So for instance, if you selected WPA2-PSK you will then be asked to enter your passphrase key to connect to your wireless network.

May 16, 2010 | Brother MFC 7840W Printer

1 Answer

Windows Mobile Symbol Find WLAN error


Warm boot the MC55 if that doesn't help then cold boot it, if that doesn't help then reload the Operating system, if that doesn't fix it then send it back to Motorola for a warranty repair.

Jun 02, 2009 | Symbol MC9090 Barcode Scanner

Not finding what you are looking for?
Zebra Symbol Technologies MC909X-G Series Barcode Scanner Logo

Related Topics:

3,301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Computers & Internet Experts

pkwc

Level 2 Expert

254 Answers

Mike

Level 3 Expert

4334 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Zebra Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...