Question about Xerox PhaserMatch ICC Color Management Software (097s03187) for PC, Mac

1 Answer

Unable to have prints from xerox 7760 match what is on the monitor

I am having trouble matching prints from the 7760 to what I see on my monitor. I have calibrated the printer using the calibrations in the machine. I have installed PhaserMatch but do not have a spectrophotometer. I have calibrated my monitor using an EyeOne Two display. My impression is that unless you have a spectrophotometer you can't reallly use Phasermatch. Could you tell me if this is correct? If not could you explain to me how to color correct using Phasermatch without a spectrophotometer? Thank you for your help, Mary Pat

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hello Mary Pat,
We just took delivery of a 7760 and have not even lifted it off of the skid yet. I've been using an EyeOne spectrophotometer for years profiling papers for inkjet printers and Xerox's support of this approach to color management was one of the reasons we bought this printer.
When you say you have calibrated the printer using the calibrations in the machine I assume you are referring to the "visual color calibration" method accessed through the control panel? I do believe that Phasermatch is limited to spectrophotometers.
I'm not familiar with the "visual color calibration" method, but unless it generates a profile for you to apply to your preview loop in your application, I'm not sure how you can benefit much.
How badly do the prints miss your on screen expectations? What application are you using to view the image file?
You can contact me by email if you like.
Dale dalehof@gmail.com

Posted on Jul 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xerox 7760 Wrong paper size error when trying to print to A4


First your computer selects the printer to output to, so make sure your default printer is selected.
Next, within your printer you may have selected a different page size for output as a default.
The printer it self should allow you to load and auto detect paper size. If this feature is not enabled see if it is a choice.
Also whatever you are trying to print check page setup in the program you are using make sure to ensure they match.

Sep 16, 2016 | Xerox Phaser 7760DN Laser Printer

1 Answer

Xerox Phaser 7760. Set document to print as double sided, and it prints single sided. Printing from Mac. Drivers up to date. Any ideas?


There are a few solutions to this problem.
1. The 7760 does not duplex from the MPT 2. The 7760 will not duplex certain paper types eg. envelope, transparency, labels, thick card stock,special. If your paper type is set to any of these it will default to simplex printing. 3. Conflicts in driver settings will cause the printer to default to simplex printing. 4. From the machine settings, duplex can be enabled or disabled. (Though driver settings should override this).
Hope this helps.

Jan 14, 2011 | Xerox Phaser 7760DN Laser Printer

1 Answer

Phaser 7760 dirty printing


Dear User,
This is a common problem of all laser printers, don't worry i will give you solutions for this. If you can able to remove the DRUM set from the printer and check that any power leak or not, IF yes clean it well and insert into printer again take a printout , afterthat also coming like dirty. So please change the drum and put a NEW DRUM. Your drum capacity is crosed beyond the limit.

I hope that my suggession will helpful to you, if yes please rate this ...

Feb 27, 2010 | Xerox Phaser 7760/GX Laser Printer

1 Answer

Xerox phaser 7760dx


This could possible be the magenta drum cartridge. also try cleaning the ROS assembly window below the drum cartridge.

Jun 10, 2009 | Xerox Phaser 7760/YDX Laser Printer

1 Answer

Trying to match color between photograph on monitor to printer. OS is Vista.


The only way to get color matching with the solid ink line 8400, 8500, 8550, 8560, 8860. Is to build you own colors with the CMYK sampler printout.

Beware this will print over 50 pages of swatchs showing the mix of CMYK for various colors. Your can then look at the color you want and see how it's made up i.e. 30% 30% 40% yellow gives a orangish color. You can then build these colors and name them in your application.

You will NOT get Panotone color matching with the solid ink series.

Apr 27, 2009 | Xerox Phaser 8560DN Laser Printer

1 Answer

Xerox 7760 GX squishing print jobs vertically


you need a snippet {software patch installed}call .xerox support

Mar 13, 2009 | Xerox Phaser 7750GX Laser Printer

2 Answers

Cyan is not working or printed over pages


Hi, Have you checked your cyan imaging unit? 
R

Jun 18, 2008 | Xerox Phaser 7760/YDX Laser Printer

Not finding what you are looking for?
Xerox PhaserMatch ICC Color Management Software (097s03187) for PC, Mac Logo

553 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Outback Jack
Outback Jack

Level 3 Expert

1150 Answers

rythot

Level 2 Expert

291 Answers

Are you a Xerox Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...