Question about PC Desktops

1 Answer

I hooked up a Linksys wireless n home router, I have internet to the desktop but cannot get my laptop to connect wireless, we want to use this in our small business, it is in a open area with no wall interferance. Can you help with some ideas? I used the cd to set it up.

Posted by on

  • Hollyecho Montgomery
    Hollyecho Montgomery May 11, 2010

    When you set up the router did you set up a WEP key?

    Does the laptop see the network name you gave the network in its list of wireless networks?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 197 Answers

Sometimes the cd doesnt work you will have to go to 192.168.1.1 and it will bring up your router configurations and then go in to the wireless setings and configure those. some laptops are not compatable with linksys you might have to get a wireless card for your laptop.

if you have any questions or need help you can use ower premium chat and i would be glad to help

Posted on Jul 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Linksys router password


To reset the Linksys back to the default settings - Press and hold the pinhole RESET button at the back of the router with the power ON for 20 secs. then release the RESET button.
To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down and put it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jan 01, 2013 | PC Desktops

1 Answer

I have a dell desktop and laptop. I have satellite internet and a Linksys router. My desktop is connected to the internet modem. I have installed the router on the desktop, connecting the modem cable to...


As long as the router has wireless antenna's on it or indicates it is a wireless model then all you need to do is turn on the wireless function of the router. You do this by access the router, open a web browser and try either http://192.168.0.1 or http://192.168.0.100 one of those should be your router. Log in and go to the wireless settings. There you can enable it and configure it.

From there, as long as your laptop has a wireless network card built in, it will see the wireless network and you can just connect to it...

Thanks!
Tim

Oct 01, 2010 | PC Desktops

1 Answer

Laptop Cannot Find Home Wireless Network


Try logging into the router with your desktop hard-wired and find the 25-digit passcode and use that to log on to the wireless network with the laptop. If not, then check if connection is good by hard-wiring the router to the laptop. Let me know what happens or if you have solved the problem.

Mar 22, 2009 | HP Pavilion a1320n (882780261747) PC...

1 Answer

I have the 4 port Linsky Router.I have a Sony laptop connected to a Sony wireless routerI also have a movie download box. When I connect both to the modem separetely,bolth the laptop and the mvie download...


this is because your wireless router is a router, and your linksys is also a router. Both are attempting to do routing, and they're colliding with each other.

Go into your linksys router's settings, and set it's IP address to have the SAME subnet mask as your wireless router, (The third number in the ip address has to be the same)

e.g. if your wireless router is 192.168.0.1, make sure your linksys is 192.168.0.2
if your wireless router is 192.168.2.1, make sure your linksys is 192.168.2.2

After that, turn OFF the dhcp server on your linksys router (do this in the linksys config page).

After that, plug the LAN port of your linksys to the LAN port of your wireless router.

Your linksys will now be acting like a "Switch" which is an extension of your network. Voila!

Dec 06, 2008 | PC Desktops

1 Answer

How to connect wireless router, Netgear WGR614, to my computer?


4 steps to set up your home wireless network
1.
Choose your wireless equipment
The first step is to make sure that you have the equipment you need. As you're looking for products in stores or on the Internet, you might notice that you can choose equipment that supports three different wireless networking technologies: 802.11a, 802.11b, and 802.11g. We recommend 802.11g, because it offers excellent performance and is compatible with almost everything.
Shopping list
• Broadband Internet connection
• Wireless router
• A computer with built-in wireless networking support or a wireless network adapter

A wireless router
The router converts the signals coming across your Internet connection into a wireless broadcast, sort of like a cordless phone base station. Be sure to get a wireless router, and not a wireless access point.
A wireless network adapter
Network adapters wirelessly connect your computer to your wireless router. If you have a newer computer you may already have wireless capabilities built in. If this is the case, then you will not need a wireless network adapter. If you need to purchase an adapter for a desktop computer, buy a USB wireless network adapter. If you have a laptop, buy a PC card-based network adapter. Make sure that you have one adapter for every computer on your network.
Note: To make setup easy, choose a network adapter made by the same vendor that made your wireless router. For example, if you find a good price on a Linksys router, choose a Linksys network adapter to go with it. To make shopping even easier, buy a bundle, such as those available from D-Link, Netgear, Linksys, Microsoft, and Buffalo. If you have a desktop computer, make sure that you have an available USB port to plug the wireless network adapter into. If you don't have any open USB ports, buy a hub to add additional ports.
2.
Connect your wireless router
Since you'll be temporarily disconnected from the Internet, print these instructions before you go any further.
First, locate your cable modem or DSL modem and unplug it to turn it off.
Next, connect your wireless router to your modem. Your modem should stay connected directly to the Internet. Later, after you've hooked everything up, your computer will wirelessly connect to your router, and the router will send communications through your modem to the Internet.
wireless_chart.jpg Next, connect your router to your modem:

Oct 29, 2008 | PC Desktops

1 Answer

I have Verizon Fios install in my home. I use to have Comcast. This is the situation, before the Fios my linksys wireless router was connected directly to a modem. Now my linksys wireless router is...


Your IP address for you linksys router needs to be changed.  More than likely there using the same IP address such as 192.168.0.1.
You have to convert your linksys router to a switch and change the IP address range it uses to on that doesn't conflict with the Verizon router.
10.150.1.1 should work.

Oct 08, 2008 | PC Desktops

1 Answer

I recently purchased a new desktop which I had linksys connected to my old pc so that my laptop would work wirelessly. Both are Dell computers. I have a Linksys WRT54G router. I have Vista and the...


I don't see why not..
are you trying to hook up both computers to your linksys router?
if you have 3 computers now... I'm assuming your old pc was connected directly to the router, your laptop was connected wirelessly and now you have a brand new computer that you also want to connect to the internet using your lynksis router.. you should have not problems doing it, wirelessly or using a wire...as long as your router has ports avaliable...

Sep 21, 2008 | PC Desktops

1 Answer

I just got my first notebook it is a compaq evo n400c with a belkin 802.11b (32 bit cardbus)wi-fi card. i am trying to find out how i can get/have internet access where ever i go. how do i go about setting...


Hi Obadiah,

U can take ur laptop to any of the hotspots and u need to turn on the wireless switch in ur laptop so that u can automatically connect to the wireless internet..i think u r aware about hotspots...

If u want to use internet in ur home..u can buy a wireless router..there are lot of companies providing wireless routers..u can buy Linksys..model no is Wrt54g..this wrt54g is a wireless router where u can connect 4 wired desktops and 20 wireless laptops..its cheaper and best.u need to buy a internet connection to connect this router...I suggest u to go for a cable Internet..Cable internet providers are comcast,shah.go for comcast.Hope this info will be useful for u.for further clarifications revert back as soon as possible

Jul 09, 2008 | Belkin PC Desktops

1 Answer

What are the step for setting up you computers to a network using a Linksys router. I have a 2 PC's and a laptop that I would linke to net work together. My first computer is connect to the Wireless-B...


Hi Ed, if your using windows you can open network connections & run network setup wizard. Follow the instruction for a home network for the wireless PC's & notebooks. Once the network is setup for all PC's than you can install the printer cd software in the PC's that you want to access the printer. Each PC & notebook will have access to the printer through the network.
The PC that that is connected to the printer needs to be shared.
Open printers and Faxes. Right click once on the printer & left click sharing. Agai follow the instructions.
Lastly,I strongly suggest you setup security for your wireless. If you do not anyone close can tap into your network connection. Follow linksys instruction to setup security. If you run into a problem you can call linksys for free advise from a pro. Their number is listed in the manual.
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1175238819816&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=1981627773H10

Good Luck! Take your time.
Have more questions, feel free to ask.
Mike

Apr 04, 2008 | PC Desktops

1 Answer

Wireless g wrt54g router


First of all, are you connecting with a PC or a Notebook?

If you have the Linksys router, you should replace the MS utility with the Linksys utility it figures your linksys wireless lan card
There are programs you can use to keep track of your router and connections...One such program is called Port Mapper...

http://3d2f.com/programs/34-197-port-mapper-download.shtml

Does your problem happen everday...or every 3 weeks...are you doing anything in particular when you are getting the inability to use the connection?
There is a new Vista patch out there I recommend downloading.

Feb 24, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...