Question about AMD Athlon 64 X2 3800+ Dual Core Processor - Socket 939 (AMDX23800)

1 Answer

Problem at boot

I have a dsktop maxdata with asus p4b mother board,my problem is the following message displayed at the booting, it enters setup bios with displaying the following message:

message confirmation
te system intruded,chassis opened
or tempered before.please check
the system.
ok

after cheking the bios all seems correct and reboot machine the same thing happens indefnitly.
thank you to help me i have amd mother board while booting giving confirmation message
system intruded shasis opend or tampered before
and ok

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 70 Answers

There is a mechanical switch connector available to determine if someone has opened the chassis.

You can bypass this through the BIOS by entering the BIOS on bootup (DEL? message at bootup? F1?) then look for the system chassis intruder alarm and DISABLE

Another option is to find the pins that the switch is supposed to be connected to (documentation on the ASUS P4B motherboard) and jumper them.

Posted on Jul 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a P5K Deluxe asus mother board error beeps no visuals


Two beeps is usually the video card.
Do you have a spare video card to change out?
This is why people keep obsolete PCI video cards for just such tests.

Dec 05, 2015 | ASUS P5k Deluxe Socket 775 Motherboard

1 Answer

It's impossible to get into BIOS setup on an epia-m


not all boards use the delete key, try these alternatively f1,f2,f5,f12 let me know if you have any luck! cheers

May 24, 2014 | VIA epia-m - 1.0ghz 256mb Dvdrw Mini-itx...

1 Answer

Cant get into my bios


Restart your computer
during the boot process you will see on the screen to press a certain key usually Delete or F2 to enter setup this will differ depending on which bios you have
Press and hold that key during the boot up process to enter BIOS.

Oct 20, 2013 | Samsung NP300E5E-A01US Laptop i3 1.9GHz...

1 Answer

Power failed during MSI P67A-C43 B3 bios update


Download the latest BIOS update from your computer manufacturer's website onto a USB flash drive. Refer to your user manual to obtain the manufacturer's website address. If the downloaded BIOS file is a zip archive, unzip the contents onto your USB flash drive. Jumper settings may need to be reconfigured on some motherboards to enter BIOS recovery mode. Most Intel-based motherboards have a jumper setting or switch near the on-board CMOS battery. The procedure for setting the jumpers will vary depending on your motherboard make and model, so refer to the motherboard documentation for specific instructions. Power on the computer and press "F2" to access the Setup Mode menu. If you are unable to access the setup menu, you will not be able to proceed with this repair. Take your computer to a repair shop, as the motherboard may need to be replaced. Use the arrow key to select "Boot Priority" or a similarly named field. Press the "Enter" key. Scroll down until "First boot priority" or "First boot drive" is selected and press "Enter." Select the USB flash drive as the first boot priority device. Press the "F10" key to save this setting and exit from the setup menu. Connect the USB flash drive to an open USB port on your computer. Then let your computer fully reboot. The USB flash drive should be detected and the BIOS should update automatically. When the update is complete, you may be prompted to restart your computer, or it may reboot automatically. If you are able to use your computer without any further problems of overheating or failure to recognize drives, your failed BIOS update has been resolved.

Apr 05, 2013 | MSI P67A-C43 B3 Desktop Motherboard -...

1 Answer

Hello, My laptop shows the following message when I turn it on- Realtek PCIe FE Family controller Series v1.19(08/10/09) PXE-EGI-Media test failure,check cable PXE-MOF-Exiting PXE ROM Reboot an


It can't locate a working boot disc. Most likely lost communications with hard drive. Look in BIOS again to see it recognizes the drive. If not try re-seating / reconnecting drive.

Feb 16, 2013 | Dell Inspiron N5010 Black

1 Answer

How do I get bios to use the files in a usb to help restore the missing OS


The usb drive must have the boot file for the operating system there are videos on youtube shows you how to make a bootable operating system on usb

Sep 11, 2012 | ASUS Eee PC 1015PEB 10.1 Netbook 1.66GHz...

1 Answer

I need install win7 from cd for my new lonovo g560


is this a cd or dvd disk windows 7 is usually on a dvd
you will need to boot from the disk if you have an operating system on your Lenovo

During the boot process you will see on the screen to press a certain key to enter setup
Press and hold that key during the boot up process to enter BIOS the scroll down using the arrow keys to advanced bios features
press enter change your first boot device to cd,press escape then press f10 to save to cmos to restart


hope this helps you

Oct 08, 2011 | Lenovo G460 Laptop Computer 06774CU Intel...

1 Answer

Turn off voice command in bias


I'm presuming you mean ASUS BIOS? whem you start your PC press and tap (or maybe hold) the F6 key, it should bring you into your BIOS etup, and normally the switch will be under the integrated tab, either disable the voice command if it is there.. otherwise check all the tabs (ensure that you scroll from top to bottom elseways try to contact the manufacturer and get their direction (OR check your users guide)

May 15, 2009 | ASUS Computers & Internet

2 Answers

No boot or beeps


clea your processor and then refix it.then alsom check with other ram may be your ram is faulty.also some times earthing problem creates problem in booting proces.

Dec 29, 2008 | Computers & Internet

Not finding what you are looking for?
AMD Athlon 64 X2 3800+ Dual Core Processor - Socket 939 (AMDX23800) Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top AMD Computers & Internet Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

Rudra Aradhya

Level 2 Expert

99 Answers

Are you an AMD Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...