The Fuji S1 Pro is not a sealed camera, it's full electronic and vulnerable to moister. Hot and humid conditions will cause these cameras to fog and not just this camera either Nikon's and Canon will do the same so lets not point a finger at any one brand. Dampness is bad news for any camera that is not sealed and even sealed the camera can be moisture damaged through the lens. By hooking up the power supply you may have shorted out the damp circuity. That's already done and we can't back up so I'm suggesting that you place it on a warm register ( I don't know what climate you are in) or in a window with sun light heat on it OR and you got to be careful with this. I've placed my Nikon EM on a food warming tray to dry it out after a dunking it took, the camera wasn't submerged but got damp in the camera bag. I just hope you haven't scorched the electronics that's a nice little camera. Sorry for the bad news.
The battery supplies electricity to the ECM even when the ignition switch is OFF. This electricity allows the ECM store data such as DTC history, freeze frame data, fuel trim values, and other data. If the battery voltage falls below a minimum level, the ECM will conclude that there is a fault in the power supply circuit. At the next engine start, the ECM will turn on the MIL and a DTC will be set. 
119 views
Usually answered in minutes!
×