Question about Smart Technologies SMART Board 580 (SB580)

1 Answer

Smartboard sb 560-24240 belonging to local primary school has had socket pulled out, i need to know wire/pin configeratation to fit new

Posted by on

1 Answer

Can you post some photographs

Posted on Aug 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I sell my second hand portable SB 540 interactive whiteboard


Try ebay, or another site called 'preloved' sell anything basically

Mar 06, 2013 | Smart Technologies SMART Board 540 (SB540)

1 Answer

My mouse is going haywire when i move it without clicking or pressing hard and the select box happens or when i move the mouse online everything moves around it took me a while to get here


first thing to try is check the mouse connections. If you are using a usb mouse try plugging it into another usb connection. If you are using a 9-pin old school mouse with the green end and pins then you might want to check to see if a pin is bent or broken, if it is you will need to replace it.

hope this helps.

Jun 08, 2010 | Compaq (153515-001) Touch Pad

1 Answer

Not getting power to a 580 smartboard.


if you have no led, the board has no power. you can only have 4 usbs in one hub, and each of those usb cables cannot be over 16 feet long. if it's red, it's not communicating with the computer. check the usb port on the computer. disconnect the usb fron the board and reconnect it. if it's amber, there is a checksum error, so reset the SC9 controller by pushing the reset button on the side of the SC9 for no longer than 3 seconds. if the pen tray leds cycle, all should be well.

Jul 14, 2009 | Smart Technologies SMART Board 580 (SB580)

1 Answer

Smartboard 580 draws scribbly lines


dip checking first is good. then reorient the board. press and hold the 2 large buttons on the pen tray until the 9-point orientation appears. use one of the smart pens to orient. don't just press the dots, start about 6 inches from the dot and draw an arc to the dot and hold it at the dot for a second, then release and do the same for the other 8. if there is still a problem, the usb voltage might be low coming from the hub/computer. try another usb cable or a shorter one. there shouldn't be more than 4 usb cables coming from one hub and the usb cables cannot be longer than 16 feet.

Mar 03, 2009 | Smart Technologies SMART Board 580 (SB580)

1 Answer

Mouse is locked after using Smartboard


unfortunately with the 580, this is what you have to do.

Oct 17, 2008 | Smart Technologies SMART Board 580 (SB580)

2 Answers

Smartboard 580


Greetings Barb,
If you have not already done so I would suggest installing the updated software found via this link:
http://www2.smarttech.com/st/en-US/Support/Downloads/SBS/NBSv10WinEval.htm
Let me know if you need more information.
Take Care,
-WN

May 08, 2008 | Smart Technologies SMART Board 580 (SB580)

1 Answer

Video Problems with Windows Media Player


Why is the projected video black in the Player? If you can see the Player, but the Video and Visualization pane is black, this usually indicates that your video card is not configured correctly. You can usually correct this problem by changing the video acceleration and/or overlay settings for your video card. To change video acceleration, do the following: 1. In Windows Media Player, on the Tools menu, click Options. 2. In the Options dialog box, click the Performance tab. 3. In the Video Acceleration area, move the slider to adjust the video-acceleration capabilities of your video hardware. Drag the slider to Full to use all available video acceleration. Drag the slider to None to use basic video-acceleration settings that work with most video hardware. To change overlay settings, do the following: 1. In Windows Media Player, on the Tools menu, click Options. 2. In the Options dialog box, click the Performance tab. 3. In the Video Acceleration area, click the Advanced button. 4. In the Video Acceleration Settings dialog box, under Video Acceleration, clear the Use overlays check box.

Aug 18, 2007 | Smart Technologies SMART Board 580 (SB580)

Not finding what you are looking for?
Smart Technologies SMART Board 580 (SB580) Logo

Related Topics:

698 people viewed this question

Ask a Question

Usually answered in minutes!

Top Smart Technologies Graphics Tablets Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Shahzad  Waseem...
Shahzad Waseem...

Level 3 Expert

746 Answers

Are you a Smart Technologies Graphics Tablet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...