Question about Televison & Video

1 Answer

My Humax PVR picture freezes after a few seconds (on BBC1) and no controls work - switching off and on the problem recurs.

Posted by on

  • ginoid Jul 04, 2008

    Exactly the same problem here, starting on the same date. It works for about 30 seconds, then video freezes then a few seconds later the audio is gone. If you unplug the aerial then it does not freez until you plug it in.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

Fixed it. Unplug your aerial, start it up (it will not freeze), go into the menu and reset to factory defaults (code 0000). When it has finished plug in the aerial but stop it searching for channels, reset to defualt again. Next let it find the channels and save them and it should work fine (mine does).

Posted on Jul 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My humax pvr 9300t is affecting my programmes and switching itself on and off every few minutes


Try switching it off at the mains for a few minutes.

If that doesn't fix it, I suspect that the disk is faulty or corrupted.

Aug 06, 2014 | Humax PVR9300T HD DVR

2 Answers

My Humax Duovisio PVR-9200T often freezes completely and has to be switched off at mains for a few seconds. Or commands from remote (eg subtitles, menu, channel change) take minutes to respond. Or...


Remove the Aerial.
Switch on or if it's frozen switch off at the mains and on again.
Press Menu
Installation and enter password - 0000
Select 'Default Setting' and OK
Select 'YES' and OK to restore all settings to factory default.
Confirm again to start loading, enter the password again and it will start scanning for channels but won't find any.
Replace the aerial and press OK to rescan and now it will find channels. On completion press SAVE then EXIT on your keypad.
You won't lose any saved programmes but you will have to re-schedule your recordings.

May 03, 2010 | Humax DRT400 DVD Recorder w/ 40 hr Tivo

1 Answer

Reprogramed humax after digital day cant get bbc1 or bbc2 all other channels okay


Could only get bbc1 london,wales, scotland, or northern ireland. Could not get bbc1 south.

Try other nearby post codes, tried 3 or 4 then eventually hit on one that worked . (Bournemouth area)

Mar 25, 2010 | Humax DRT800

1 Answer

PVR freezes and nowt will work


I'm in the US and am not completely familiar with the digital conversion in your area, but the following information may be helpful to you.
Humax released a software update earlier this year which adds the full range of ‘Group 2' Freeview Playback. For details see Trusted Reviews

Aug 14, 2009 | Electronics - Others

1 Answer

HUMAX PVR-9150T : REMOTE CONTROL DOES NOT TALK TO BOX - This has only happened recently and is not a battery issue. The box displays green lights on ''standby'' and ''tv'' I have tried reset, but cannot...


I also have this same problem. Freezes after about 30 seconds to a minute after switching on. Think it is possibly related to the program listings sent to it. May be some error. How do I fix though???

Jul 07, 2009 | Humax Televison & Video

1 Answer

Humax PVR 9200T freezing picture and will not turn off.


Unplug the aerial; switch the PVR On; if you have control via the remote do a reset to default settings thus:

1. press Menu on the remote
2. select Installation and enter default password of 0000 unless you have changed it
3. select Default settings and okay on YES
4. then turn if off again via the remote
5. plug the aerial back in and it will scan for channels, save them of course.

I got help on this from other forums but saw your request for help. This worked for me.





Oct 25, 2008 | Televison & Video

1 Answer

Humax pvr 9200T


Hello Fixya Team,

I did solve the problem with the EPG not updating quick enough when you power on.
If once you power on you switch channels to BBC1 youwill find the EPG updates quite quickly.

Hope this helps out.

Lomp.

May 31, 2008 | Humax Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

946 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...