Question about Office Equipment & Supplies

1 Answer

Waste ink absorber is almost full- how do I clear it? Have a Pixma MP110, & have lost the instruction manual..

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 49 Answers

You could try this one, I think it will work, but if it doesn't , nothing lost???
Canon MPC190
Reset Waste Ink
1) Enter SERVICE MODE.
By pressing Menu, Copy, Scan, Copy, Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Posted on Jul 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The ink absorber is almost full on Pixma MP110-how do I clean?


Ink Absorber Full
This may clear the ink absorber problem. There is ink absorbers located at both ends of the printer where the ink head move.
To dry the ink absorber, power up the printer and open the cover so the ink cartridges and print head will move to the middle of the printer.
Then take several sheets of absorbent tissue, fold it into a pad and place it inside the printer over the ink absorber on the far left hand side of the printer to soak up the excess ink. You may need to change the absorbent tissue a few times. Then repeat the same procedure on the right hand ink absorber.
Close the lid and the printer should now function normally.

Jan 19, 2013 | Canon PIXMA Office Equipment & Supplies

1 Answer

The waste ink absorber is nearly full on a Cannon Pixma MP110 printer - how can I change this without resetting the printer software?


The software won't help, you need a shop to replace the absorber pads and reset the counter thru service mode.

Sep 29, 2009 | Canon PIXMA MP780 All-In-One InkJet...

6 Answers

Canon pixma MP110 waste ink absorber full


1 - Turn on the printer
2 - press MENù SCAN COPY SCAN (it will enter in service mode)
3 - select TEST MODE
4 - Select PRINTER TEST in TEST MODE
5 - Select EPROOM CLEAR
6 - Select INK COUNT
7 - Press OK
8 - Press the STOP/RESET key and then press the ON/OFF key
9 - Change the waste ink absorber in the printer

Oct 24, 2008 | Office Equipment & Supplies

1 Answer

Waste ink absorber is almost full


Try this:
Resetting overflow error code for Printer Canon Pixma MP110
  1. Turn on the printer.
  2. Click Menu, and then Scan, Copy and Scan again. All - entered the service mode.
  3. Select Counter
  4. Click Copy - everything. Waste dropped to zero.
  5. Turn off the printer POWER button.
Good luck

Oct 14, 2008 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Canon pixma mp110


Here this step by step to resetting waste ink counter printer Canon Pixma MP110
  1. You will include printer.
  2. press button Menu, then Scan, Copy and again Scan. All - entered into the service regime. 3. Select Counter.
  3. Press button Copy - all Pampers is discarded into zero.
  4. You will turn off printer by button POWER.

Aug 05, 2008 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

My Cannon Pixma MP110 printer is showing message;- The Waste absorber is full. What can I do to fix this?


Try this
Reset Waste Ink
1) Enter SERVICE MODE.
By pressing Menu, Copy, Scan, Copy, Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Jul 05, 2008 | Canon Office Equipment & Supplies

2 Answers

Problem with my printer


plz check the link below
http://www.fixyourownprinter.com/forums/inkjet/50418#1

May 30, 2008 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

Waste ink tank full


please help me for repair waste in tank full canon ip3300.

Nov 01, 2007 | Canon PIXMA iP3300 InkJet Photo Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

69244 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...