Question about Ovens

1 Answer

Whirlpool self cleaning oven, Super capacity 465, door will not close

Lock on oven door is not in proper position to operate oven, will not start oven temperature procedure

Posted by on

  • 8 more comments 
  • Anonymous Oct 09, 2008

    I have the same problem. I get an error FSE 1 when I try to initiate the self cleaning. The door never locks.

  • chaoswmn Oct 12, 2008

    I tried to turn on the self cleaning and got an f code. The door never locked, I have a 465 model RF314PXG

  • Anonymous Nov 26, 2008

    How can I fix this problem? I get the same F code.

  • blight Nov 30, 2008

    Hi i have a whirlpool6akp 691 and the door does not close, its annoying as the heat disappears any solutions thanks.

  • Hank Palacio Dec 21, 2008

    Oven will not clean. I set it but it does not start. Push self clean and start and after a few min. I get a EL-F5 on the screen/

  • Anonymous Mar 15, 2009

    I had F5 I need help ? and the door did not open

  • Anonymous Mar 19, 2014

    Door will not come off

  • Anonymous Mar 22, 2014

    How do I remove the oven door from my KIC Super Chef oven in order to clean the oven properly

  • Anonymous Mar 22, 2014

    How do you take the oven door off a KIC Super Chef oven in order to get in and really clean it

  • Anonymous Mar 26, 2014

    Oven door is on lock and can't get
    It off lock whirlpool super capacity 465

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same FSE error which the whirpool web site advises that you will need to schedule a service appt to fix. Instead I leaded against the door while initiating the cleaning cycle and the door locks and oven cleans fine.

Posted on Dec 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Don't have a appliance booklet for my Whirlpool Model 465 Super Capacity oven - need to know how to clean please


Hi,


Before you go working too hard to get you oven to go into the self clean mode(self destruct)....check out this tip...

Self Cleaning Oven Problem


heatman101

Jan 06, 2011 | Ovens

1 Answer

I ha ve Whirlpool self cleaning oven super capacity 465. The broiler portion works but the oven portion does not.


The most likely part to be the prob is gonna be the ignitor. Even if it is glowing it could be weak. If it is dim orange it is weak. Check out this Vid:

Dec 28, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

2 Answers

OVEN TURNING OFF BY ITSELF. I THINK THE CODE ON IT IS SAYING F2


Hi!
The F2 code means Oven Temperature Too High. When this code is present do the following:
1. Look for welded relay contacts on bake or broil relays. If this happens, replace oven control (also called clock or ERC).

2. For SELF CLEAN models: check door lock operation.
3. Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective.

Remember: Oven control (ERC) measures resistance of sensor circuit, not actual oven temperature.

A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

Nov 02, 2010 | Whirlpool SB160PEE Gas Single Oven

1 Answer

Whirlpool self cleaning oven problem


Hi


Thanks for using FixYa. This error means that you’ll need to check the door latch/switch and replace the part that has gone bad. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jul 09, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

The oven door won't open, and there is still food in it. We have a Whirlpool Super Capacity 465 Model, amd need assistance immediately.


Hello. It is possible that the oven accidentally got turned to the self-clean function. Check to see. If it is set to self-clean, the door lock activated. In order to unlock the oven has to be taken off of self-clean and then it has to cool down to room temperature before it will unlock. Joe

Apr 04, 2010 | Ovens

1 Answer

Lock symbol on oven won't go away


Unplug for 60 seconds and plug back in

Apr 30, 2009 | Ovens

2 Answers

Self clean


Usually the oven has to be locked closed with a handle on on the front door. This will activate a safety mechanism that will allow the cleaning cycle to start. If the safety switch is malfunctioning or the door is not closed properly, the cleaning cycle won't start.

Apr 20, 2008 | Ovens

1 Answer

Whirpool Super Capacity 465 Self-Cleaning Gas Range error code F5


facing the front of the oven (while off) put your hand along the back of the oven toward the top left side. there should be a techinical spec sheet with a list of what the codes mean and possable solutions.

Mar 08, 2008 | Whirlpool SB160PEE Gas Single Oven

4 Answers

ER1 F2 error on Whirlpool Super Capacity 465 RF386PXE Oven


HOW DO YOU CLEAN SELF CLEANING OVEN SUPER CAPICITY 465

Sep 23, 2007 | Ovens

Not finding what you are looking for?
Ovens Logo

Related Topics:

1,821 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...