- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
well, if you can Ping it, then the firewall is not likely going to be blocking it. Regardless, which product do you have ? The Silver Stone 2-drive NAS ? If yes, you should be using the FNS Assistant (FNSA)
The Freecom Network Storage Assistant helps you to locate your Freecom SilverStore 2-Drive NAS in your network. It can also be used to:
- quickly open the SilverStore 2-Drive NAS configuration website.
- configure the basic settings.
- mount shared network folders.
a) Start the FNS Assistant and select the device from the device list.
b) Go to "Web interface of your Freecom Network Storage device" for initial configuration
Okay, you need to re-configure the WGR614 router that you have. Make sure that the WII is connected and you must mac clone the device. So that the router can easily detect the WII and you will have a stable and better connection to configure the WII with Netflix.
ti is a wireless printer. You will need to connect to the wireless network on the printer. you will need to check the wireless settings of the router. Click Here to know how to check the settings of the router.
Basically, if it is a wireless-ready printer, what you need is match the same wireless settings that you have from your router.
On most wireless-ready printer, you need them to connect temporarily to your computer through USB connection then run the Setup CD. You will then have the option to configure the wireless settings (the same that you have on your router), then install the printer driver afterwards. You'll be prompted when to unhook the printer from your computer to make it wireless.
In most cases, printers are not meant for network use. But thankfully people have thought about the problem and have given us a solution. If you follow this link http://shop1.frys.com/product/5449469?site=sr:SEARCH:MAIN_RSLT_PG you will find a USB print server that I have used a few times. Now, the setup on this USB print server can be difficult but once you get it going you wont have to mess with it again. One last thin, your printer has some features to it that will not work anymore. One of them that I know of is it wont tell you when its running low on ink and if it has a scanner, that will not work ether. If you have problems, let me know and I will try to help.
Router is probably configured incorrectly.
Turn off cable modem and router for 1 min. Turn on cable modem...when done booting..turn on router...check for internet.
If no...log into router and make sure it is NOT in PPOE but rather in dynamic mode.