Question about PC Desktops

1 Answer

I have A HP PAVILLION ZT 1130 LAPTOP, THE POWER CONECTOR ON THE BACK OF IT HAS SNAPED OF , HOW CAN I GET IN THE CASE TO REPLACE THE CONNECTOR

Posted by on

  • Storm Jetson Jul 04, 2008

    thank you for your help, wedged the connector with a small pice of card board where it had snaped under the left speaker , your help was excelent , and thank you ,

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,342 Answers

You can download the Repair Guide from HP HERE

Posted on Jul 03, 2008

  • Georgia B
    Georgia B Jul 04, 2008

    Glad to hear you got it fixed.

    Thanks for voting.


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Audio wiring problem on HP Compaq DC7100 CMT with DC7700 motherboard


You have a problem with HP connectivity. When I moved my dx7100 motherbard into another casing I experienced that error and also chassis fan not detected error. Chassis fan error is easy to remove, You only need a fan with at least 3 cables (with sensor) and plug it into 4 pin chassis fan connector. Audio conector have 10 pins (eight pin missing for orientation (with followed numerication
2 4 6 10
1 3 5 7 9
If you only want to get rid of the error ( with no use of back audio(use of another soundcard)) then short pins 2 and 7. But if you want to use back connectors, then you must bridge with jumpers 1-3 for microfone, 5-6 for audio L and 9-10 for audio R.
I've bee searched thru internet and didn't find this trick anywere.

383f43eb-0011-4988-95f9-468382038f18.png

Feb 24, 2013 | HP Compaq dc7600 Convertible Minitower PC...

1 Answer

My hp pavillion 503n has a amber light in front...power supply fan comes on but doesnt power up


This could still be a power supply issue. You can buy a power supply tester. This will tell you if the power supply is putting out power to all of the cables.
The other cause of this issue could be a motherboard issue. HP would have to replace the motherboard. A lot of the time HP make their mother boards to fit only their cases. This makes it hard to place a non HP board into a HP case.

Feb 08, 2013 | PC Desktops

1 Answer

MB schematic for HP Pavillion 7960 desktop pc


it is wrote on the mother board... look in the front left hand cornor,youll see a bank of 8 sets of 2 pin conectors..the abriviations are...pw=powe swith..rs= reset ....pw led = front powere light...hdd led = hard drive led

Mar 12, 2012 | HP Pavilion 7960 PC Desktop

1 Answer

Hi ... I powered down my HP Pavillion a622n for the first time in a while. When I plugged it back in, the power light is flashing and the computer won't start. Can you please help me to determine what...


power off the computer by removing the power from the rear of the computer then remove the cover of the cpu then also remove the power conector to the hard disk then locate the memory card remove them then wipe them clean with a dry clean cloth then insert the memory into the slot connect the power plug and switch on if the display screen is ok and post bios showing then switch off the computer and connect the power conector of the harddisk

Jul 03, 2011 | HP Pavilion a622n (PC108A) PC Desktop

1 Answer

Hi my hp pavilion laptop DV5000 on start up has black screen and one long beep then 3 shot beeps then one long beep and another 3 short beeps. The lights stay on but nothing happens. The pc has been...


first remove the cover of your computer after switching off the system and removing the power plug the power the system and see whether the processor fan is working if not power off the system and remove the 24 pin connector from the smps to the motherboard and short the green and black pin of the conector from the smps and see the smps fan is working if not replace the smps if working then remove the memory from the slot and clean them or change the memory to which match the dimm slot an connect the connector and switch on the computer

Feb 26, 2011 | HP Pavilion M9040N Elite Desktop PC

1 Answer

HP Pavillion a520n desktop will not power up. We just moved to a new house and something must have happened during the move. There is a blinking light on the back of the PC. Power button does nothing. Is...


Remove the power first then:

Take the side panel off and make sure that all of the connectors are secure in their sockets

It is possible that the machine was bounced and the power connector from the PSU has come adrift .

Check the wiring from the front panel power on/off switch to the push on connectors on the Motherboard

Go onto www.hp.com and download an installation manual for the machine or look at the Motherboard when you have the cover off and go to their website and do the same thing

Jul 03, 2009 | HP PC Desktops

2 Answers

Turns itself off & gets hot -don't think fan is kicking on


Since you do not hear the fan anymore I would start by opening up the case and seeing if power is going to the fan and make sure any connectors for it have not come loose. If the connectors are still hooked up chances are the fan is shot and needs to be replaced.

If you are not familiar with working around electronics and parts under power I would highly suggest you have some one who is familiar with this do it.

May 06, 2009 | PC Desktops

1 Answer

I need to replace the power connector in my pavilion dv9608nr notebook by hp. the number stamped on it is 78pbb-90w


Hi Vinman, the DV9600 series pavillion laptops mostly uses the same type of power adapter. these adapters can be purchased in local computer shops, or you may check on Radioshack, walmart, bestbuy or circuit city whoever is the nearest. if possible, bring the broken one with you so that you can personally compaer if you will get an original part, or a compatible part.

hope this helps.

Aug 17, 2008 | PC Desktops

1 Answer

Damaged usb port needs to be replaced on my HP Pavillion 513W computer. Need diagrams and step by step instructions


1-Shut down you pc .2-unplug the power cord.3-open the case .4-Find the usb wires trac them back to the board. 5-mark were the wires go with a marker.6-plug new usb port wires in.7-put the case back on pc.8-plug power cord in.9-turn on pc.10-plug your usb device in.

Jul 02, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...