An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert who has answered 1,000 questions.
Re: rca menu problem
Yes is your complaint menu keeps popping up.... if so i have seen a couple possible solutions to the problem.. replaceing the front panel(BUTTON CLUSTOR) or the ir sensor.. but usally it is the buttons
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When this occurs the first thing we examine at the shop is the front button curcuit board. or button assembly. Generally when those become damaged it can cause this. What is definatly a given is the processor of the tv is somehow recieving the command "put up the main menu" it recieves this command signal from ether the remote or the front panel button. Sometimes when people clean they use windex or other cleaner. sometimes this may get into those buttons and short them out. or in normal use mosture or just general use can cause this. When this occurs try pushing the menu button on the front panel... does it go away. The chances are if the buttons are damaged the board will have to be replaced. At our shop this repair will run 50 to 75
One or more of the buttons on the front of the set is bad. Best thing is to take the front panel off. About eight TORX T-20 screws from the back to get the speaker grille and panel off, then three more on the front and the whole panel with the button assembly will come off. Simplest fix is to just pull the plug off and disconnect the button assembly. the remote will still work.
Yes. Its probably a stuck button on the TV's front panel. Try pushing or wiggling each button on the panel. It could be the channel up/down buttons or volume up/down, menu, etc.
When there is a button that is making slight contact, it keeps the microprocessor busy attending to the command its erroneously receiving from the offending button and may not allow other functions to work when this occurs.
It doesn't matter which button is stuck, any of the symptoms you describe can happen.
RCA makes several universal remotes that are sold by a variety of stores, Target, Walmart, etc. These come with the RCA code already programmed in them. Look for one that has a "menu" function button. You should be able to access the code necessary to unlock the panel buttons.
I see this alot at the shop ... the front panel buttons have become damaged. THe best coarse of action is to replace the front button cuircit board assembly... **** there is a tempery fix untill you get the part... remove the front panel and take button cuicit board out...just use remote to control the tv. This is also a way to test to see if this is the problem.. if you romove the connector to the buttons and the problem goes away then the buttons are the problem. you get get this cuicit board at union electronics. You have to get the extended model number off the back ussally d52w20yx1 or yx2 or yxsomething...not to difficult a repair