Question about Onkyo Televison & Video

1 Answer

I have an Onkyo DV-CP702 and it keeps saying I have a mechanical error. I thought a disc was stuck, so I followed your tips and took off the top and indeed, there were 2 discs stuck. I took them out, but I am still getting the mechanical error message. Is there anything else I can try. Thanks for your time. Jen

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

The loading mechanism is out of timing and needs to be rebuilt. This is a fairly strightforward procedure if you have the manual as there is a sequence and alignment procedure for this. No parts are required in most cases. This unit should go to a service station. If you attempt this and are not aligned correctly, it is possible to damage the optics assembly.

Dan

Posted on Jul 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mech error


Go to mechanic store or hardware and have them fix it.

Jul 22, 2013 | Onkyo Dv Cp701 Multi Disc Changer Player

1 Answer

Have lost the remote control to onkyo dv cp702. Would like to access the random option.


You can get a substitute remote (the original remote is no longer available) at
http://www.remotes.com/remotes/servlet/rs?a=gmi&uuid=13118717212490&smodel=DVCP702&brand_pn=ONKYO_DVCP702
Let me know if you have any other problems or questions.Please rate this solution. Thanks.

Jul 28, 2011 | Onkyo DV-CP702 DVD Player

1 Answer

Displaying an error message "mecha


http://www.fixya.com/support/t4093524-onkyo_dvd_changer_display_reads_mecha

http://www.fixya.com/support/t1119443-onkyo_dv0_cp702_error_mecha_err

These may help you.

May 07, 2011 | Onkyo DV-CP702 DVD Player

1 Answer

My Onkyo DV-C600 will not Load neither DVDs or CDs. It keeps flashing LOADING or Disc Error.


try cleaning the optics, with alcohol swab, if this dos not help you will need to replace the laser assembly. or and have further diagnostics performed on your unit.

Jan 28, 2010 | Onkyo DV-C600 Multi-disc DVD Player

1 Answer

Onkyo DV-SP405 DVD player says no disc


This woud be due to two things

1. laser
2. servo motor not spinning to the correct speeds i,e Bad motor

Thanks

Jun 11, 2009 | Onkyo DV-SP404 DVD Player

3 Answers

DVDs presumed stuck and the player won't eject


Hi, If you feel comfortable opening the unit, then you may remove the top cover normally held by 2 - 4 screws. The tray should be visible and most units have a locking bar right at the center to hold the discs down. Removing this (2 screws normally, 1 at each end of the bar) would expose fully the tray with the 2 discs on top. Remove the discs and put the locking bar back with the screws. You can test the unit without the top cover. Please be reminded about safety precaution when working with active/live units and laser equipment. Power it up and check if the "mech err" still shows. If not you're set to cover it up, otherwise, your probably better off seeking the services of a qualified technician. This is a generic method which normally should apply to most CD/DVD units. Good luck and kind regards.

Aug 19, 2007 | Onkyo DV-CP702 DVD Player

1 Answer

Onkyo DV-CP702 will not load any disks!


Look at page 46 of the manual for reset or initialzation.

Nov 17, 2006 | Onkyo DV-CP702 DVD Player

2 Answers

DV-C501 MECHA ERROR


I have actually had the same problem multiple number of times now and am going to suggest you a rather "crude sounding" solution!! First, atleast in my case the problem usually occurs when you turn the DVD player off while it still has DVD/CD inside and then turn it back on a little while later. This is how the "solution" works. I just disconnect the player and give it a good shake !! This somehow dislodges the "stuck" disc inside and voila, the player opens up after reconnecting and pressing the open/close button. Sometimes it takes more than one "good shake". Sounds rather severe but works everytime !!

Oct 04, 2006 | Onkyo DV-C501 DVD Player

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

668 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Televison & Video Experts

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

The Knight
The Knight

Level 3 Expert

69795 Answers

rick826
rick826

Level 2 Expert

191 Answers

Are you an Onkyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...