Question about Philips GoGear Flash MP3 Player

1 Answer

GoGear 4GB SA3345

My volume + button stopped working, only my volume - button works, so I can't any volume out, reset, but volume still low, no backup command via menus could be found.

Help, I really like the player, but expected it to work longer than 6-months.

Don

Posted by on

1 Answer

I have the same problem but am taking it further check out this link http://www.berr.gov.uk/consumers/fact-sheets/page38311.html

Posted on Jul 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get my computer to reconize my 4gb phillips gogear


Triple Reset for Philips’ GoGear:

Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again.

-Tha Mp3 Doctor

Dec 14, 2008 | Philips GOGEAR SA6045 MP3 Player

1 Answer

Philips GoGear audio video player 4GB...cannot update


Make sure the lock is not engaged.

Triple Reset for Philips’ GoGear:

Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again.

-Tha Mp3 Doctor

Sep 13, 2008 | Philips GoGear Flash MP3 Player

1 Answer

My philips gogear wont turn on


Disconnect the GoGear from the computer
Reset it first (pinhole in back - safety pins work best), even if nothing happens - just to be on the safe side
Nothing will happen still, but we are OK
Make sure the power is off, and hold in the volume + button, reconnect the GoGear to the computer while holding in the volume + button, and continue holding volume + until a window pops us saying Found New Hardware Wizard
Go through the Found New Hardware Wizard, and the GoGear should be working again - the player will be revived

Write me back if this fails to resolve the problem.

-Tha Mp3 Doctor



Jun 17, 2008 | Philips GoGear HDD6330 MP3 Player

5 Answers

Phillips gogear need driver need driver for the mp3 player, it completely stopped working and the philips device manager tries to repair it, but is un successful


To reload drivers:
WARNING: this process will erase all songs off the GoGear.
Disconnect the GoGear from computer.
Turn the GoGear off.
Hold in the volume + button.
Reconnect the GoGear while holding in the volume + button.
Continue holding the volume + button.
After 5-50 seconds, Windows will pop-up a "Found New Hardware Wizard." - complete the wizard (BTW, you can take your hand ff the volume + button now).
Good To Go (Gear)!
-Tha Mp3 Doctor

Apr 05, 2008 | Philips GoGear SA261 MP3 Player

2 Answers

My mp3 won't charge


You will probably have to perform a Repair, but start simple:
1) Reset your GoGear - paperclip into reset hole while player is turned on
2) Restart your computer
3) go to www.usasupport.philips.com and follow the frequently asked question for your SA5125 - My player is not recognized by PC
4) Repair the device: (WARNING: this will delete all files off your GoGear)
1) Backup all files on the GoGear
2) Open up Philips Device Manager (Start --> All Programs --> Philips)
3) Click on the Repair Tab, and look for a msg that says connect the player while holding the volume + button
4) Disconnect the GoGear from the computer and turn the GoGear off - hold in the volume + button and continue to hold it as you reconnect the GoGear to the computer; after holding the volume + button for up to 20 or 30 seconds, a window will open up saying that your device is being repaired (now you can let go of the volume + button); after the repair is successfully complete, your GoGear will be good as new.

-Tha Mp3 Doctor

Jan 28, 2008 | Philips SA5125/37 MP3 Player

1 Answer

Wont allow me to sync anymore songs but not full


Make sure you back up all songs on the GoGear before attempting this solution.

1) Back up all files on the GoGear
2) Open up Philips Device Manager (Start --> All Programs --> Philips)
3) Click on the Repair Tab, and look for a msg that says connect the player while holding the volume + button
4) Disconnect the GoGear from the computer and turn the GoGear off - hold in the volume + button and continue to hold it as you reconnect the GoGear to the computer; after holding the volume + button for up to 20 or 30 seconds, a window will open up saying that your device is being repaired (now you can let go of the volume + button); after the repair is successfully complete, your GoGear will be good as new

Now you can do the firmware upgrade that will prevent this problem from occuring in the future. Open up Philips Device Manager and click the Update tab. This problem was caused because most GoGear's were designed for Windows XP with Media Player 10 (which is no longer the latest standard).

-Tha Mp3 Doctor

Nov 22, 2007 | Philips GoGear SA178 MP3 Player

1 Answer

Phillips GoGear 4Gb - Can't sync songs onto player anymore.


Software can be found by going to:
www.usasupport.philips.com
Enter your model number
On the next page, click on your exact model number without the "B" on the end
On the next page, click on "software and drivers"

Make sure you back up all songs on the GoGear before attempting this solution.

1) Back up all files on the GoGear
2) Open up Philips Device Manager (Start --> All Programs --> Philips)
3) Click on the Repair Tab, and look for a msg that says connect the player while holding the volume + button
4) Disconnect the GoGear from the computer and turn the GoGear off - hold in the volume + button and continue to hold it as you reconnect the GoGear to the computer; after holding the volume + button for up to 20 or 30 seconds, a window will open up saying that your device is being repaired (now you can let go of the volume + button); after the repair is successfully complete, your GoGear will be good as new

Now you can do the firmware upgrade that will prevent this problem from occuring in the future. Open up Philips Device Manager and click the Update tab. This problem was caused because most GoGear's were designed for Windows XP with Media Player 10 (which is no longer the latest standard).

-Tha Mp3 Doctor

Oct 31, 2007 | Philips GoGear SA178 MP3 Player

1 Answer

Ma 4gb go gear is not working


Make sure you back up all songs on the GoGear before attempting this solution.

1) Back up all files on the GoGear
2) Open up Philips Device Manager (Start --> All Programs --> Philips)
3) Click on the Repair Tab, and look for a msg that says connect the player while holding the volume + button
4) Disconnect the GoGear from the computer and turn the GoGear off - hold in the volume + button and continue to hold it as you reconnect the GoGear to the computer; after holding the volume + button for up to 20 or 30 seconds, a window will open up saying that your device is being repaired (now you can let go of the volume + button); after the repair is successfully complete, your GoGear will be good as new

Now you can do the firmware upgrade that will prevent this problem from occuring in the future. Open up Philips Device Manager and click the Update tab. This problem was caused because most GoGear's were designed for Windows XP with Media Player 10 (which is no longer the latest standard).

-Tha Mp3 Doctor

Oct 26, 2007 | Philips GoGear HDD6330 MP3 Player

Not finding what you are looking for?
Philips GoGear Flash MP3 Player Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips MP3 & Digital Media Players Experts

Herby0802

Level 2 Expert

48 Answers

Pieter Vleeshouwers

Level 3 Expert

1420 Answers

mac colar

Level 2 Expert

421 Answers

Are you a Philips MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...