Question about Marantz SR4500 Receiver

1 Answer

Martantz SR 3000 - Are there any remote codes

I have been synching all my devices to the Comcast On Demand remote (5 digit codes) and the one supplied for Marantz does not work. Is there a remote code that works or is the AR too old? Thank you I have the comcast remote (5 digit codes). The comcast provided code (30189) does not work. Also, I am unable to find the code using the search procedure. I noted I could program the TV and the Marantz DVD unit with this remote.

Posted by on

  • 1 more comment 
  • jacob041 Aug 11, 2008

    Same problem with Marantz CR8000. 5 digit code provided does not work but remote will control a TV

  • lmgray Dec 07, 2008

    Same problem with Marantz SR780 -- got the new remote with 5-digit codes
    and the only code they give for Marantz doesn't work for me. I noted the new
    code (30189) is the same as one of the old 4-digit codes with a 3 in front so
    tried tacking a 3 on the front of the old codes but none of those worked. I
    called Comcast support and actually got someone who understood my
    problem and tried to help -- suggested adding a 0 in front of the old codes
    but none of those worked either... Tried to get an old "grey OK button"
    Comcast DVR remote with the 4-digit codes but local offices don't have
    them anymore. Solution: gave up and got a Harmony remote.

  • guvland Jan 24, 2009

    same problem all around. nothing works for fixing the marantz receiver. Oddly, my remote for DirectTV works just fine with it...

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Click here for Comcast Remotes Five Didgit Codes hope it works for you did for me.

Posted on Sep 10, 2008

2 Suggested Answers

robotek
  • 1512 Answers

SOURCE: Martantz SR 3000 - Are there any remote codes

Hi, sorry it took so long for me to get back to you. The system does not give us updates on older problems.

Found the manual, and it does have 5 digit codes, Page 2 lists the codes for marantz as 0321, 0269. Hope that helps you.

regards
robotek

Posted on Jul 05, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need Comcast 5-digit universal remote code for Sony BDP-S3100


Find Your Comcast Remote Control Programming Code
make sure your using those codes with the AUX button. Comcast does not have all remote codes for every electronic made though.

Feb 05, 2014 | Comcast Custom DVR 3 Device Universal...

1 Answer

Need codes for emerson & also insructions to program comcast remote


Hello
Setup codes for Emerson TV with "Comcast On demand Custom-3 Universal remote control are:

0154, 0236, 0463, 0180, 0282,
0178, 0179, 0038, 0177, 0280

The Comcast Custom 3-Device universal

remote control is preprogrammed at

the factory to operate the Cable Box

supplied by your Comcast system, an

RCA TV, and an RCA VCR (in the AUX

mode). To control devices other than

default brands (excluding the Cable

Box), perform the below steps; otherwise
skip this section:

1* Turn on a device (e.g., VCR or DVD

Player) and, if applicable, insert

media, (e.g., video cassette or disc).

NOTE: Please read steps 2 to 6 completely

before proceeding. Highlight or write

down the codes and device you wish to
program before moving on to step 2.

2* On the remote control, press a

device key once (i.e., AUX or TV).

NOTE: Use the AUX key to program

control of an Audio Amplifier or

Receiver, a DVD Player, a Home-

Theater-In-A-Box Device, a PVR (or
DVR), or a VCR.

3* Press and hold Setup until the

selected mode key blinks twice,
then release Setup.

4* Locate the code for your device in

Manufacturer's Codes on the back

of this user guide. Brands are listed

in alphabetical order with the
most popular codes listed first.

5* Enter the first four-digit code for

your device. If you perform this

procedure correctly, the selected

mode key will blink twice.

NOTE: If you enter an invalid code, the

selected mode key will display one long

blink and exit the programming mode.
Repeat steps 2 to 5 with a valid code.

6* Aim the remote control at your

device and press Power once. The

device should turn off. If it does

not respond, repeat steps 2 to 6,

trying each code listed for your
brand until you find one that

Searching For Your Code.

NOTE: If the device does not have a
Power key, press the (Play) key
OK

Aug 22, 2011 | Televison & Video

2 Answers

The philips universal remote codes for my apex tv don't wok. Since I put new batteries in none of the codes for apex tv work


Hello
Philips universal remote control cannot be synchronised with Apex Digital TV. There is no code for Apex with it. There are very rare remote controls which have codes with Apex Digital. Comcast On Demand Custom DVR 3-Device Universal Remote Control is one amoung them. Codes for Apex Digital Tv; with this remote are:
0748, 0765, 0767
Buy this one. It can be sychronised with most of the present devices. OK.

May 31, 2011 | Apex Digital GT2015 20" TV

2 Answers

I need a remote code for my tv for a comcast remote i have a sansui tv thank you


hi,
Try the following codes



5 digit code :- 10463, 11409, 11904, 11911,11935 (Comcast Universal Remote )

4 digit code :- 0463 (COMCAST - CUSTOM DVR-3 DEVICE UNIVERSAL REMOTE CONTROL)
ok

Jan 14, 2011 | Sansui DTV2760 27" TV

1 Answer

Need Comcast 5 digit remote code for Norcent LCD HDTV


Here is a link to the Comcast webpage that has the codes for the various remotes available from them. There are eleven different remotes. You will need to identify the remote you have. Then click on "view manual". The online manual will have the code list in it.
http://www.comcast.com/corporate/customers/customer_support/remotes.html

Jan 12, 2010 | Norcent Technologies LT-3250/LT-3251 32...

2 Answers

Progamming Comcast remote


Go here, it has a viewable manual for the comcast remote and a list of codes. There is also a way to search codes listed. Haven't tried yet, but it can't hurt trying!

http://www.scribd.com/doc/202024/comcast-dvr-remote-manual

Sep 08, 2008 | Sanyo DS20930 20" TV

5 Answers

Comcast on demand custom dvr 3 device codes for sony dvd-hdx576wf


It seems like most (maybe all) Sony HTIB do not work with the Comcast Custom Remote. I've found a work around that fixes the volume control and power button though. Hope it helps you all. I have a DAVHDX275 but I think this will work for most Sony HTIB systems.

What you need to do is steal some codes from a like product and then hardcode in the changes you need to the comcast remote. Set your AUX to 21232 (a sony code for TV/VCRs).

Then do the following:

1. While still on AUX, press and hold SETUP again until the remote blinks twice
2. Type 994
3. Press and release SETUP
4. Type 32975
5. Press and release VOL+
The remote should blink twice. That should reprogram the VOL+ to work with your Sony HT device. For each of the following function codes, follow the same steps and use the codes listed below:
Vol+ = 32975
Vol- = 31951
Power = 32719

Good luck. Let me know if it works.

Aug 06, 2008 | Audio Players & Recorders

3 Answers

TV CODES


the code is 10463 brian

Jun 04, 2008 | Televison & Video

1 Answer

Martantz SR 3000 - Are there any remote codes


Hi, sorry it took so long for me to get back to you. The system does not give us updates on older problems.

Found the manual, and it does have 5 digit codes, Page 2 lists the codes for marantz as 0321, 0269. Hope that helps you.

regards
robotek

May 30, 2008 | Marantz SR-3000

1 Answer

Need help finding DVP3140 remote programming code for comcast universal remote


Since the codes that Comcast gave you did not work, there is a very high possibility that the remote control is not compatible with the DVD player. You cannot expect universal remote control to work with all devices, regardless of its make. Philips does not have codes for this DVD player because it is the maker of the universal remote control that sets the codes.

Mar 24, 2008 | Philips DVP3140

Not finding what you are looking for?
Marantz SR4500 Receiver Logo

1,332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

72650 Answers

 Grubhead
Grubhead

Level 3 Expert

4861 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...